THE INDUSTRIAL UTILIZATION OF CHEMICAL MODIFIED AGRICULTURAL RESIDUES

INTRODUCTIONToday, the world's industry is utilizing less than 10% of biomass of raw materials from plantation [1]. Agricultural residues, such as cereal straws are important and abundant renewable organic resources of energy and production of a diversity of chemicals, including ethanol production [2], activated carbon [3] and ion exchangers [4]. Many other applications for Cereal straws are in the process of being developed.In china, wheat, maize and sorghum are the three major crops, w…     

A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.     

含酯氧基手性方酰胺基醇催化前手性酮不对称还原反应机理的计算研究

用量子化学半经验方法AMl对含酯氧基手性方酰胺基醇催化苯乙酮不对称还原的反应机理进行了计算研究，提出了合理的反应机理．结果表明，还原产物的手性是由恶唑硼烷／硼烷／苯乙酮加合物及相继的六元环过渡态所决定的．根据过渡态理论，计算得到反映立体选择性大小的理论e．e．值．     

A VERIFICATION METHOD FOR COMMUNICATION PROTOCOLS MODELED AS COMMUNICATING EXTENDED FINITE─STATE MAC

本文建立了用于表述含有无限值状态成分的通讯协议机的抽象模型，给出了基于该模型的形式检证法，试制了检证系统．该检证法不需要假定信道的有界性．对于给定的通信协议，检证系统将判定其对指定状态的可到达性．做为检证例，从ＯＳＩ参照模型中抽出了大同步点设置功能单位，就“无死锁”、“无传输错误”等性质进行了实际检证     

NETS OF LF SETS IN LF SUM─TOPOLOGICAL SPACES

ＮＥＴＳＯＦＬＦＳＥＴＳＩＮＬＦＳＵＭ─ＴＯＰＯＬＯＧＩＣＡＬＳＰＡＣＥＳ￥ＺｈｕＭｉｎｇｋｕｉ；ＳｕｎＱｕｎ（ＴｈｅＤｅｐａｒｔｍｅｎｔｏｆＭａｔｈｅｍａｔｉｃｓ）Ａｂｓｔｒａｃｔ：Ｉｎｔｈｉｓｐａｐｅｒ，ｗｅｄｉｓｃｕｓｓｔｈｅｒｅｌａｔｉｏｎｏ...     

Research ＆ Development of Grade X70 LSAW Steel Pipes for West-East Gas Pipeline

In this article the research and development of X70 large diameter longitudinal seam submerged arc welded (LSAW) steel pipes for West-East Gas Transportation Pipeline project (WEGTP) in China are introduced, including the key technique, fabrication of pipe production line, mass production and the latest progress of LSAW steel pipe technique.     

The torsion model of soft tissue in virtual surgery

In order to solve the problem of real-time soft tissue torsion simulation in virtual surgeries,a torsion model based on coil spring is proposed to actualize real-time interactions and applications in virtual surgeries. The proposed model is composed of several connected coil springs in series. The sum of torsion deformation on every coil is equivalent to the soft tissue surface deformation. The calculation of the model is simple because the method for calculating the torsion deformation for each coil spring is the same. The virtual surgery simulation system is established on PHANTOM OMNI haptic device based on the Open GL 3 D graphic interface and VC + + software,and it is used to simulate the torsion deformation of virtual legs and arms. Experimental results show that the proposed model can effectively simulate the torsion deformation of soft tissue while being of real-time performance and simplicity,which can well meet requirements of virtual operation simulations.     

Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

A cryogenic scanning electron microscopy (cryo-SEM) technique was used to explore the shear-thickening behavior of Fe-ZSM5 zeolite pastes and to discover its underlying mechanism. Bare Fe-ZSM5 zeolite samples were found to contain agglomerations, which may break the flow of the pastes and cause shear-thickening behaviors. However, the shear-thickening behaviors can be eliminated by the addition of halloysite and various boehmites because of improved particle packing. Furthermore, compared with pure Fe-ZSM5 zeolite samples and its composite samples with halloysite, the samples with boehmite (Pural SB or Disperal) additions exhibited network structures in their cryo-SEM images; these structures could facilitate the storage and release of flow water, smooth paste flow, and avoid shear-thickening. By contrast, another boehmite (Versal 250) formed agglomerations rather than network structures after being added to the Fe-ZSM5 zeolite paste and resulted in shear-thickening behavior. Consequently, the results suggest that these network structures play key roles in eliminating the shear-thickening behavior.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering

To investigate the change of the mechanical properties of soft metals doped PVD(Physical Vapor Deposition)coatings after the migration of soft metal to the surface, TiN-Cu coating was deposited on Si(100) by magnetron sputtering. The microstructure and mechanical properties at room temperature and after vacuum heat treatment at 300 ℃ were investigated. The results showed that the grains were clustered and the microstructure was porous for TiN-Cu coating at room temperature, while many micro-and nano-sized Cu particles were observed on the surface after vacuum heat treatment at 300 ℃. The elastic properties of the TiN-Cu coating after vacuum heat treatment at 300℃ degraded compared with that at room temperature. The hardness and elasticity modulus of TiN-Cu coating kept constant(3.7 GPa and 125.0 GPa, respectively) with the increase of nano-indentation depth, while the hardness and elasticity modulus of TiN-Cu coating after vacuum heat treatment at 300 ℃ increased gradually.