Supercritical Fluid Carbon Dioxide in the Extraction of Lanolin and Its Alcohol

The use of supercritical fluid carbon dioxide (SF-CO_2) in extraction of lanolin and its alcohol issuperior to the conventional solvent extractionmethod. Its distinctive advantages include highextractive ratio, nontoxic and nonflammablesolvents, and minimal by-product pollution. The     

强直电流伸展弧CVD硬质合金金刚石涂层工具

采用自行研制的强电流直流扩展电弧设备对酸浸和渗硼预处理的YG6刀片进行了金刚石薄膜涂层沉积，并对放于不同位置的沉积刀片表面涂层的激光Raman谱和SEM形貌进行了分析、研究。结果表明：渗硼预处理工艺优于酸浸预处理工艺；在渗硼处理的GY6刀片上，沉积的金刚石薄膜涂层具有大面积、均匀性好和质量高的特点。     

异种钢焊接接头过渡层影响因素的研究

本文根据回归正交优化法原理,用电孤焊试验研究了异种钢焊接接头过渡层的影响因素。通过实测与计算,获得过渡层为零时,最佳匹配的焊接规范参数,为消除过渡层的有害影响探讨了新的途径。     

液化气罐焊接质量的控制

本文对液化气罐体焊缝和热影响区在高温冶金反应、结晶动力学及热循环的作用下,产生的一次结晶和二次结晶的组织形态、性能特征作了分析。实践表明,焊接夹杂和气孔是引起罐体焊缝裂纹或导致爆炸的主要原因。为此,作者提出,为了保证液化气罐焊接质量,必须从冶金和工艺两方面采取有效措施,迅速建立焊接质量监控系统,对焊接检验手段要进一步完善。     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

粉末高温合金平衡相析出行为的热力学对比

利用热力学平衡相计算方法及相应的高温合金数据库对René95,Rene88DT和эп741нп三种合金在平衡相析出温度范围和析出量以及之间的关联性进行了系统的热力学计算对比分析.结果表明:三种粉末高温合金的平衡相种类基本相同,主要平衡相为γ,γ'和碳化物M23C6,MC,M6C.René95合金中的碳化物含量要高于其他两种合金.3п741нп有着较高的γ'相析出温度和较大的析出量.随温度降低,Co和Nb从γ'相中析出,在其周围富集,其中3п741нп合金中尤为明显.合金元素的偏聚度也和合金的初熔点与终熔点之差的大小有关,其熔解区间越大即初熔点和终熔点之差越大,合金元素的偏聚度越大.     

Emergent Property in Macromolecular Motion

In this paper, the model of inverse cascade fractal super-blocks along one direction (in the positive or negative) in the 3-dimensional space is developed to describe the self-similar motion in macromolecular system. Microscopically the cohesive and dispersed states of the motion blocks are co- existent states with vastly different probability of occurrence. Experimental results and theoretical analysis show that the microscopic cohesive state energy and dispersed state energy of each motion block are respectively equal to the macroscopic glassy state energy kTg and molten state energy kTm of the system. This singularity unveils topologically the non-integrability, mathematically the anholonomy, and macroscopically the emergent property. This singularity also reveals that the glass, viscoelastic and melt states are three distinct emergent properties of macromolecular motion from a macroscopic viewpoint. The fractal concept of excluded volume is introduced to depict the random motion at various scales in     

Structural Changes of Polyethylene Terephthalate Fibers Grafted by Acrylamide

A group of grafted PET fibers with different graft yield are formed by grafting acrylamide onto the PET main chains. The structure of grafted fibers are studied by scanning electronic microscope ( SEM ), infra-red spectrophotometer ( IR ), and differential scanning calorimetry(DSC). At the same time, the moisture regain, dyeability, strength, and elongation at break of the samples are measured and their relations with structural changes are discussed. Compared with ungrafted fiber, shape of the fiber cross-section, IR characteristic absorption peaks, and melting behavior of the grafted fibers have been changed, causing the fiber dyeability and moisture regain to be increased, and mechanical properties to be changed.     

熔盐Cr-Ti碳化物复合层涂覆技术

对表面镀铬、渗铬的钢件进行硼砂熔盐浸渍渗钛处理，可形成多元碳化物复合层。其抗冲击疲劳及抗介质腐蚀性能均明显优于单一渗钛层。应用Ｘ－ｒａｙ衍射及电子探针技术，确定了复合层的结构。     

降解性脂肪族聚酸酐与蓖麻油酸共聚物的合成与性能

以脂及二酸（己二酸和癸二酸）及蓖麻油酸为原料，采用高真空熔体缩聚反应合成了新型脂肪二酸－二蓖麻油酸共聚物，实验结果表明，蓖麻油酸与脂肪二酸共聚有效降低了聚合物的结晶度，对聚合物的热性能也有所改善，在通常环境条件下，所合成的共聚物具有降解性。