氯乙烯精馏过程模拟优化与节能降耗的研究

针对某聚氯乙烯厂精馏过程中氯乙烯产品纯度低、能耗高的问题,利用化工流程模拟软件Aspen Plus对氯乙烯精馏系统中的T-203塔进行模拟优化,选择适合氯乙烯体系的NRTL模型进行计算,确定理论板数为28块。根据灵敏度分析和正交试验得到最佳操作参数为:回流比为0.8,进料位置为第2块理论板,侧线采出位置为第18块理论板。产品中氯乙烯质量分数达到99.999%,低沸物质量分数小于1×10-6,高沸物质量分数小于5×10-6。同时对精馏系统提出两项节能降耗技术,其中循环水改造技术预计为企业带来经济效益1034.85万元/a,高效导向筛板技术可以有效提高分离效率和生产能力。     

财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

运用Actigraph GT3X三轴加速度传感器测量成年及老年男性人群步行的信效度研究

评价Actigraph GT3X三轴加速度传感器测量中国男性人群典型体力互动信效度,开发基于中国人群步行活动模式的GT3X三轴加速度传感器能耗推算方程。方法受试对象包括青年组(21.92±1.14岁),老年组(55.5±4.52岁)。受试者佩戴GT3X三轴加速度传感器,在跑台上分别完成3km/h(慢走)、4.5km/h(正常步行)、4.5km/h10%(上坡步行)、6km/h(快走)以及7.5km/h(慢跑)速度的走跑运动各5min。受试者佩戴COSMED K4b2便携式代谢测试仪,并将GT3X三轴加速度传感器佩戴于髋部,同步采集心肺功能仪及加速度传感器数据。结果根据受试对象4种无坡度走跑运动推导出线性方程MET=0.000653*counts(Axis1)+2.345521以及线性方程MET=0.000689*counts(VM)+1.640721,但其相关系数不高;GT3X+三轴加速度传感器记录上坡步行(4.5km/h10%)运动与无坡度运动(4.5km/h)相比,三轴counts及VM均显示有差异性(P<0.05),但counts增加率远低于MET增加率;GT3X+三轴加速度传感器两次重复测试,pearson值高,即离散程度低。结论本研究推导垂直轴(Axis1)、三轴矢量和(VM)的线性方程,为中度相关,误差值较大,且上坡运动时的GT3X+三轴加速度传感器记录counts值与MET值呈非线性相关,提示Actigraph GT3X三轴加速度传感器能耗推算方程可根据不同运动方式、运动强度推算相对应方程;Actigraph GT3X三轴加速度传感器测量我国成年及老年男性人群步行活动其信度较高。     

Synthesis and Largely Enhanced Nonlinear Refraction of Au@Cu_2O Core-Shell Nanorods

Au@Cu_2O core-shell nanorods with tunable thickness of Cu_2O shell were synthesized and their linear and nonlinear optical responses were investigated. Two transverse plasmon resonance peaks were observed when the Au nanorods were coated with Cu_2O shells, which were adjusted by the Cu_2O shell thickness. The nonlinear absorption of the Au@Cu_2O nanorods is enhanced by 5 times at the longitudinal plasmon resonance wavelength compared with that of bare Au nanorods. More intriguingly, largely enhanced nonlinear refraction and suppressed nonlinear absorption at the transverse plasmon resonance wavelength were observed in the Au@Cu_2O nanorods. Our findings indicate the existence of strong local field enhancement at the interface between the Au core and the Cu_2O shell, which would provide a promising strategy in designing plasmonic nonlinear nanodevices with good nonlinear figures of merit.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

高校图书馆流通服务常见问题及对策

阐述了高校图书馆流通部工作中常见的实际问题,提出了提升高校图书馆流通服务质量的对策,包括馆员坚持终身学习、加强书库管理、提高馆员咨询服务能力、要使馆员熟悉操作软件、要加强领导对流通工作的重视等。     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

统计物理中三种系综之间的关系

本文从粒子数和能量的涨落和粒子数和能量的平均值与极大值之间的关系，说明统计物理中三种系综之间的区别与联系．