基于差异信息量的多源数据融合方法

D-S证据理论可应用于多源数据融合领域，但在处理高度冲突的证据时，可能会出现反直觉的结果.为解决这一问题，本文提出了差异信息量的概念及融合方法.首先，通过信息熵表明证据的相对重要性，采用散度获取证据可信度.然后利用证据可信度优化证据差异度以得到差异信息量，经过计算获取数据的最终权重，并将其作为D-S证据理论中的基本概率分配进行决策.在处理冲突证据、一致证据及不同数量证据等方面的数据融合问题时与其他方法对比，所提方法收敛更快，准确度更高.故障诊断的应用实例表明，所提方法的不确定性更小，优于现存的其他方法.     

财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

heory, controls parameter and application of the packed-bed electroosmotic pump

Theory and controls parameters affecting the output pressure and flow rate of the packed-bed electroosmotic pump (p-EOP), including zeta potential ζ, electric intensity E, length of the column L, cross-section area of the column A, dielectric constant ε and viscosity coefficient η of the liquid being pumped, are discussed concisely. And also, the fabrication and application of the p-EOP are introduced.     

苏南经济社会发展与高等应用型技术教育对策研究

分析高等应用型技术教育中面临的诸多挑战,探讨行之有效的人才培养对策。     

煤矿生产中对地质资料的再认识

从测量、地质、钻探、煤矿三大害、煤质成果、地质资料评价等方面阐述了地质资料对煤矿生产的重要性，指出对地质资料的再认识，就是为了将地质资料去粗取精，确定其中能够为我所用的部分，以更好地为生产服务，并在矿区做下一步勘探工作时能够有的放矢，以最少的资金投入，达到最佳目的。     

Robustness of alternative non‐linearity tests for SETAR models

In recent years there has been a growing interest in exploiting potential forecast gains from the non‐linear structure of self‐exciting threshold autoregressive (SETAR) models. Statistical tests have been proposed in the literature to help analysts check for the presence of SETAR‐type non‐linearities in an observed time series. It is important to study the power and robustness properties of these tests since erroneous test results might lead to misspecified prediction problems. In this paper we investigate the robustness properties of several commonly used non‐linearity tests. Both the robustness with respect to outlying observations and the robustness with respect to model specification are considered. The power comparison of these testing procedures is carried out using Monte Carlo simulation. The results indicate that all of the existing tests are not robust to outliers and model misspecification. Finally, an empirical application applies the statistical tests to stock market returns of the four little dragons (Hong Kong, South Korea, Singapore and Taiwan) in East Asia. The non‐linearity tests fail to provide consistent conclusions most of the time. The results in this article stress the need for a more robust test for SETAR‐type non‐linearity in time series analysis and forecasting. Copyright © 2004 John Wiley & Sons, Ltd.