少齿差偏摆齿轮传动机构平衡的探讨

少齿差偏摆锥齿轮传动有传动比大、结构紧凑、重量轻、承载力大等优点,但存在着离心惯性力和轴向惯性力,因而引起多方向的振动。本文通过对运动的分析探讨解决此类机构平衡问题的方法。     

智能化44点啤酒发酵温度巡测仪

本文将八十年代最新研制的集成温度传感器ＡＤ５９０、８０９０单片机，可编程逻辑器件ＧＡＬ－１６Ｖ８Ａ等新器件及智能化新技术，集中应用于啤酒发酵过程的温度检测。与传统人工测温相比，具有测温精度高、稳定性好、反应快、可远距离自动检测、定时打印，减轻工人劳动强度、调节啤酒发酵温度的响应速度快等特点。     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

The induction of secondary seed dormancy by oxygen deficiency in a barnyard grassEchinochloa crus-galli

At 25°C, secondary dormancy was induced in seeds ofE. crus-galli exposed for 100 days to oxygen deficiency. By contrast, hypoxia did not induce dormancy at 15°C or prevent dormancy termination at 7°C. Secondary dormancy was terminated after 2 months stratification at 7°C. Oxygen deficiency may increase the proportion of dormant seeds in the soil, and affect the dynamics of the barnyard-grass soil seed bank.We thank Miss Jitka Králová for her excellent technical assistance.     

Internal interactions within the human circadian system: the masking effect

Summary In the realm of human circadian rhythms, the masking effect is defined as the change in the course of deep body temperature induced by changes in the degree of physical activity, or by the alteration between sleep and wake. This effect is particularly obvious during internal desynchronization where the rhythms of deep body temperature, and the sleep-wake sleep-wake sleep cycle — i.e. one of the masking factors — run with different periods.Every sleep onset is accompanied by a rapid drop, and wake onset by a rapid rise in deep body temperature, each one with an overshoot of about 50% of the steady state variations. When rhythms are calculated, with the dominant temperature period as the screening period, exclusively from data obtained during sleep episodes, on the one hand, and from those obtained exclusively during wake, on the other, two average cycles emerge: the sleep temperature curve and the wake temperature curve. Both run in parallel but are separated by the masking effcct. As derived from many experiments, the mean masking effect amounts to 0.28±0.06°C. The masking effect also depends to some extent on the phase of the temperature rhtthm; it is larger than average around the temperature maximum and during the descending phase of the temperature cycle, where the alertness commonly is highest and the probability to sleep, in general, and the REM sleep propensity, in particular, are smaller than average. This also can be interpreted to indicate that the sleep temperature curve is phase advanced relative to the wake temperature curve; this, on the average, by 0.9±0.3 h.If the individually determined amount of masking is added to the temperature data obtained during sleep, or substracted from the temperature data obtained during wake, a temperature curve emerges that can be though of as being purified of the masking effect. Analyses of this artificial curve allow estimation of that part of the internal interactions uninfluenced by the masking effect. On the average, about half of the amount of interaction between the rhythm of sleep-wake and that of deep body temperature is explained by the masking effect, whereas the other half is oscillatory interaction. Both types of interaction are inherent and inseparable parts of the circadian clock mechanism, as can be deduced from model considerations.     

钢坯磨削温度的若干试验研究

通过使用“可磨式”人工热电偶进行的不同条件下的磨削温度测量试验研究了钢坯磨削工件表层温度,结果表明钢坯被磨削表层温度分布与热强呈三角形分布时的理论分析结果相同,表层峰值温度随磨削压力及磨削功率增大而提高,且随工件进给速度提高而略有降低,峰值温度还随磨削角度减小而提高,90°磨削的峰值温度比0°磨削要低250℃左右,砂轮种类也对峰值温度有重要影响,使用锆刚玉砂轮时磨削温度低于棕刚玉砂轮,试验结果表明高效钢坯磨削的磨削区温度远比普通磨削为高,可达1200℃左右,还从不同方面探讨了磨削高温对钢坯磨削的影响,认为尽管磨削高温有若干不利影响,但对高效钢坯磨削却是重要条件,上述讨论,从一个方面揭示了钢坯磨削机理,并验证了关于钢坯磨削温度的理论分析结果。     

Photoperiodic summation is temperature-dependent inPyrrhocoris apterus (L.) (Heteroptera)

Summary InPyrrhocoris apterus, a low temperature, 15°C, prevented the termination of diapause by long days and, unexpectedly, also the induction of diapause by short days. Both responses were enabled at a higher temperature, 26°C. In contrast to current concepts, it was proved that the summation of photoperiodic signals was temperature-dependent, since the morphogenetic development was prevented by starvation.     

涂层对热电偶热电性能及大气中寿命的影响

在难熔金属热电偶表而施加涂层的目的,旨在使原仅限和真空、中性及还原气氛中测量的热电偶能在大气中使用.本文讨论涂层对难熔金属热电偶在氧化气氛的"热电势—温度","热电势—时间"的关系及其寿命的影响.具有涂层的W/M.热电偶在氧化气氛(常压下1500℃取得263小时±1%t的最高记录,而W-Re热电偶存1500℃试验的前70小时偏差也在1%t内.而没有涂层的热电偶仅支持数分钟便破坏.     

泵闸混凝土施工期智能温控关键信息识别

为实现施工期大体积混凝土温控要素的智能快速识别,提高智能温控系统的反馈及预测模型精度,提出了一套智能算法对物联网技术采集到的各类温控要素原始测值进行识别及转化。针对浇筑温度、浇筑时间、最高温度、内外温差、冷却通水起止时间与表面保温覆盖等施工期关键温控参数,结合工程经验分别给出相应识别任务的判定逻辑并编写对应程序,然后应用多个实际工程数据进行验证,并分析各识别功能的准确率。验证结果表明,本文算法识别效果良好,能够实现温控要素采集的自动化、智能化、快速化、精准化,具有较强的工程实用价值。     

西昌人工与自动酸雨观测记录差异规律研究

利用西昌国家基本气象站2021年人工和自动的酸雨观测数据,对TCYII 1型酸雨自动观测系统和人工系统的降水采样偏差及完整性、测量数据的准确性和一致性、设备硬件及软件通讯的故障率进行了对比分析。结果表明：正常情况下,2套系统数据的完整性、准确性、一致性较好。酸雨自动观测系统在采样方式及样品保存方面具备一定优势,能够保证观测数据更接近于自然雨水的数值,更贴近真实情况。自动观测系统面临单轨运行,它的手动操作设置、部分配件需厂家优化改进。上级主管部门对自动系统测量阈值的设定、采样中出现的漏采、空采、多采等特殊情况,仍需进一步明确处理办法。