有限差分法地震波走时计算

改进文献「１」提出的有限差分计算走时的算法，射线路径也可根据互易性原理求出，模型计算表明该方法精度较高并适用于速度较差较大的情形。该算法对层析成像，迭前Ｋｉｒｃｈｈｏｆｆ偏移将是非常有用的。     

低温热解脱氧方法研究

为研究低煤化度煤含氧官能团的化学活性及其改性机理，通过对低温热解方法条件的确定，建立了实验室规模低温热解脱氧方法，进一步考察了该方法的效果。结果表明，在实验室采用此法研究低煤化度煤低温热解脱氧是可行的。     

20CrMnTi钢高温组织变化规律与最佳渗碳温度选择

本文研究了２０ＣｒＭｎＴｉ渗碳钢的高温组织变化，确定了最佳渗碳温度，并在变温增强短周期渗碳工艺中获得了应用。     

红外测温仪在纺织上使用的条件及方法

介绍了红外测温仪在纺织测温方面的应用情况．就预置试样的发射率不同、测量位置不同及试样受到红外辐射的照度不同等３种情况对红外测温仪测量结果的影响，探讨了准确测温的最佳使用条件和方法．     

温度场对自蔓延高温合成致密化的影响

在自蔓延高温合成（SHS）致密化工艺中，准确确定施压滞后时间是工艺控制的关键．施压滞后时间的上限值一般是根据SHS过程的坯块表面温度与时间关系曲线获得，难以真实地反映坯块内的温度变化．作者以传热学理论为基础，针对SHS－准热等静压过程，建立了燃烧产物内的温度分布方程，并以此解释了最终产物内密度分布存在差异和形状变化的原因．     

The electrical conductivity of H_2O at 0.21-4.18 GPa and 20 -350℃

The electrical conductivity of H2O in solid and liquid phases has been measured at 0.21-4.18 GPa and 20-350℃. The results indicate: ( i ) different phases of H2O in solid have different relations between electrical conductivity and temperature and pressure. The conductivity changes continuously with temperature, but discontinuously with the pressure between 2.11 and 2.58 GPa, which corresponds to the transforming pressure between ice (Ⅵ) and ice ( Ⅶ ) ; ( ii ) the con-ductivity of H2O in liquid all increases with temperature and pressure, but there are discontinuities at pressures between 0.57 and 0.9 GPa, and between 2.11 and 2.58 GPa, which are also consistent with the polymorph of ice (ice ( Ⅴ), ice (Ⅵ) and ice ( Ⅶ ) ) . This reflects that H2O in liquid at different pressures has quite different properties of electron chemistry. It is prob-ably the important reason that causes the layers with high electrical conductivity and low velocity in the earth's crust and upper mantle.     

微双折射光程差测量技术

研究了微双折射光程差测量技术，提出用旋转半波片－反射法测量半封闭玻璃制品应力，探讨以电光调制法为基础的微双折射光程差测量系统的稳定性。从软件和硬件两个方面建立起自动测量系统。实践证明达到了预期要求。     

STUDY OF THE HEAT AND HUMIDITY TRANSFER PROCESSES BETWEEN AIR AND WATER IN THE AIR WASHER

The processes of heat and humidity transfer between air and water are what to be studied mainly in the paper, we put forward some main factors which influence the processes of heat and humidity transfer in the air washer. We come to the conclusion that we can change these main factors to achieve different heat and humidity transfer processes and decide processes of heat and humidity transfer of air and water with the initial temperature of spraying water in the air washer. All these results can make things convenient for the air conditioning management.