超疏水性织物的构建及其多功能性

 介绍了Young's、Wenzel、Cassie-Baxter模型等研究疏水性表面的基本理论,总结了宏观结构、微观结构、微观性能、毛细效应、化学组成等影响织物润湿性能的因素,综述了溶胶-凝胶法、层层自组装法、化学气相沉积法、化学刻蚀法、电纺丝法、聚合物成膜法、相分离法、辐射接枝法等超疏水织物表面的制备方法,预示了织物未来发展方向应为抗菌性、阻燃性、油水分离、超双疏、抗紫外性等多功能性研究,提出了目前超疏水性织物研究瓶颈及拟解决办法,展望了超疏水性织物的未来应用前景。     

Effect of tin addition on the microstructure and properties of ferritic stainless steel

This article reports the effects of Sn on the inclusions as well as the mechanical properties and hot workability of ferritic stainless steel. Precipitation phases and inclusions in Sn-bearing ferritic stainless steel were observed, and the relationship between the workability and the microstructure of the steel was established. Energy-dispersive X-ray spectroscopic analysis of the steel reveals that an almost pure Sn phase forms and MnS-Sn compound inclusions appear in the steel with a higher Sn content. Little Sn segregation was observed in grain boundaries and in the areas around sulfide inclusions; however, the presence of Sn does not adversely affect the workability of the steel containing 0.4wt% Sn. When the Sn content is 0.1wt%-0.4wt%, Sn improves the tensile strength and the plastic strain ratio and also improves the plasticity with increasing temperature. A mechanism of improving the workability of ferritic stainless steel induced by Sn addition was discussed:the presence of Sn lowers the defect concentration in the ultra-pure ferritic lattice and the good distribution of tin in the lattice overcomes the problem of hot brittleness that occurs in low-carbon steel as a result of Sn segregation.     

Effects of elemental Sn on the properties and inclusions of the free-cutting steel

A new environment-friendly free-cutting steel alloyed with elemental Sn (Y20Sn) was developed to meet the requirements of machinability and mechanical properties according to GB/T8731-1988. The machinability of the steel is enhanced by the segregation of elemental Sn at grain boundaries. The effect of Sn segregation on intergranular brittle fracture at normal cutting temperature from 250℃ to 400℃ is confirmed. The formation mechanism of main inclusions MnS is influenced by the presence of Sn and the attachment of Sn around MnS itself as a surfactant, and this mechanism also explains the improvement in machinability and mechanical properties of the steel. In the steel, the relevant inclusions are mainly spherical or axiolitic, and are uniformly distributed in small volume. Such inclusions improve the machinability of the steel and do not impair the mechanical properties as well. Experimental results demonstrate that the appropriate content of Sn in the steel is 0.03wt% to 0.08wt%, and the remaining composition is close to that of standard Y20 steel.     

Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route

This article reports the effects of stirring speed and T6 heat treatment on the microstructure and mechanical properties of Al-2024 alloy synthesized by a rheocasting process. There was a decrease in grain size of α-Al particles corresponding to an increase in stirring speed. By increasing the stirring speed, however, the globularity of matrix particles first increased and then declined. It was also found that the hardness, compressive strength, and compressive strain increased with the increase of stirring speed. Microstructural studies revealed the presence of nonsoluble Al₁₅(CuFeMn)₃Si₂ phase in the vicinity of CuAl₂ in the rheocast samples. The required time for the solution treatment stage was also influenced by stirring speed; the solution treatment time decreased with the increase in stirring speed. Furthermore, the rheocast samples required a longer homogenization period compared to conventionally wrought alloys. Improvements in hardness and compressive properties were observed after T6 heat treatment.     

Effects of ECAE processing temperature on the microstructure,mechanical properties,and corrosion behavior of pure Mg

A two-step equal channel angular extrusion (ECAE) procedure was used to process pure Mg. The effects of ECAE processing temperature on the microstructure, mechanical properties, and corrosion behavior of pure Mg were studied. The results show that the average grain size of pure Mg decreases with decreasing extrusion temperature. After ECAE processing at 473 K, fine and equiaxed grains (~9 μm) are obtained. The sample processed at 473 K exhibits the excellent mechanical properties, whereas the sample processed at 633 K has the lowest corrosion rate. The improved corrosion resistance and mechanical properties of pure Mg by ECAE are ascribed to grain refinement and microstructural modification.     

Effects of H content on the tensile properties and fracture behavior of SA508-III steel

SA508-Ⅲ steel was charged with different hydrogen (H) contents using a high-pressure thermal charging method to study the effects of H content on the tensile properties and evaluate the H embrittlement behavior of the steel. The results indicate that the ultimate tensile strength remains nearly unchanged with the addition of H. In contrast, the yielding strength slightly increases, and the elongation significantly decreases with increasing H content, especially at concentrations exceeding 5.6×10-6. On the basis of fractographic analysis, it is clear that the addition of H changes the fracture mode from microvoid coalescence to a mixture of river patterns and dimples. Carbides are strong traps for H; thus, the H atoms easily migrate in the form of Cottrell atmosphere toward the carbides following moving dislocations during tensile deformation. In addition, stress-induced H atoms accumulate at the interface between carbides and the matrix after necking under three-dimensional stress, which weakens the interfacial bonding force. Consequently, when the local H concentration reaches a critical value, microcracks occur at the interface, resulting in fracture.     

Au掺杂对L1_0相FePt纳米颗粒的结构和磁性的影响

利用溶胶—凝胶法制备了(FePt)100-x Au x(x=0%,5%,10%,20%)纳米颗粒,并且研究了不同含量的Au对FePt纳米颗粒磁性和结构的影响.实验发现,添加Au可以有效降低FePt合金从无序相到有序相的相转变温度,增加L10相FePt颗粒的有序化程度,并且会增加FePt颗粒的晶粒尺寸.磁性测试结果表明,在600℃时,掺杂Au后(FePt)90Au10样品的矫顽力可以达到9 585 Oe,比不添加时的5 250 Oe提高了很多,这可能是由于掺杂Au使FePt的有序化程度增加,并且使颗粒的尺寸增大.     

Damage prediction of 7025 aluminum alloy during equal-channel angular pressing

Equal-channel angular pressing (ECAP) is a prominent technique that imposes severe plastic deformation into materials to enhance their mechanical properties. In this research, experimental and numerical approaches were utilized to investigate the mechanical properties, strain behavior, and damage prediction of ECAPed 7025 aluminum alloy in various conditions, such as die channel angle, outer corner angle, and friction coefficient. Experimental results indicate that, after the first pass, the yield strength, ultimate tensile strength, and hardness magnitude are improved by approximately 95%, 28%, and 48.5%, respectively, compared with the annealed state, mainly due to grain refinement during the deformation. Finite element analysis shows that the influence of die channel angle is more important than that of outer corner angle or friction coefficient on both the strain behavior and the damage prediction. Also, surface cracks are the main cause of damage during the ECAP process for every die channel angle except for 90°; however, the cracks initiated from the neighborhood of the central regions are the possible cause of damage in the ECAPed sample with the die channel angle of 90°.     

Research on mine dustfall agents based on the mechanism of wetting and coagulation

Mine dust is classified as one of five natural coal mining disasters because it can harm the health of miners and poses a serious threat to the safety of the coal mine. Therefore, preparation of an effective dust suppression agent is highly desired. To improve the capture efficiency of fine dust, this study examines the dust suppression effects of various combinations of wetting agents, additives, and coagulation agents by using the optimum seeking method to reduce mine dust, particularly respirable particles. The optimal formula is shown to contain 10wt% fatty alcohol polyoxyethylene ether (JFC), 4.96wt% cationic polyacrylamide, and 4wt% calcium chloride. The dust suppression effect can be achieved at 96.1% in 5 min by using the optimal formula.     

多孔氧化铝膜色彩特性研究进展

 介绍了利用阳极氧化法制备的氧化铝膜板（AAM）的色彩特性。利用阳极氧化法制备的AAM,其色彩分布于整个可见光区,不同的色彩主要来源于光的干涉现象。AAM 的这种特性可广泛应用于染色、彩色显示、装饰装潢、防伪、纺织工业等。人工制备AAM 彩色膜板得到研究人员的广泛关注,其制备方法包括：AAM 多层膜结构、金属覆盖AAM 结构、碳纳米管复合AAM 结构、沉积纳米线的AAM 结构等。从周期性氧化电压法制备周期性多层结构AAM 光子晶体开始,按照改善AAM 色彩饱和度方法的不同分为5 个部分,综述了近年来对AAM 色彩特性的研究进展。