连铸板坯外形的在线检测方法

介绍了板坯外形在线检测的测量原理，计算方法，并给出了实验测量方法，过程及计算机图像处理系统的处理结果，该方法简单，实用，精度较高。     

平面弹性连杆机构的KED分析

本文放弃了文献中引用的运动学假设和瞬时结构假定,考虑了刚体运动和弹性变形运动之间的耦合项,分析了梁的横向位移对轴向应变的影响。利用虚位移原理和达明贝尔原理,建立了构件和系统的运动微分方程式。以四杆较接机构为例,进行了KED分析。从所得结果可以看出,本文更好地反映出弹性对机构动态误差的影响。     

铝合金变形抗力的实验研究

采用恒应变速率凸轮式形变压缩试验机试验了四种铝合金材料的变形抗力 ,分析了应变率和应变速率对变形抗力的影响 ,结果表明随应变的增加 ,变形抗力以近似幂函数关系增加 ,在此基础上建立了简单、适用的变形抗力计算模型     

Principle of Mangling Correction of Plate-welding Section Steel and its Application

Thanks to the fantastic development of power, transportation, chemical engineering, architecture and other fields, there has been an increasing demand for new type of section steel with large sections used for construction frame, such as type-H, type-T, and type-C section steel. New types of section steel usually are long and with large cross section. Therefore, for the sake of the cost, steel plate welding structure is used home and abroad. During the welding process, welding distortion seems unavoidable. ...     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

黄土滑坡形变分析预报方法研究

基于黄土滑坡的变形特征和演化规律，利用滑体总形变量与滑坡演变过程形变量之间的逼近关系，建立了一种简单，实用的滑坡预报数学模型，其效果良好，为黄土滑坡时间预报由定性分析向定量评价提供了途径。     

盲孔法测量复合材料残余应力释放应变矩阵的有限元分析

对盲孔法测量正交各向异性复合材料残余应力释放应变矩阵进行有限元分析.以碳/环氧正交各向异性材料板为基础,对于不同孔深的盲孔进行有限元计算,得出与其相对应的释放应变矩阵,并分析孔深对释放应变矩阵的影响.为实际工程中残余应力的测试奠定了基础.     

异种钢焊接接头过渡层影响因素的研究

本文根据回归正交优化法原理,用电孤焊试验研究了异种钢焊接接头过渡层的影响因素。通过实测与计算,获得过渡层为零时,最佳匹配的焊接规范参数,为消除过渡层的有害影响探讨了新的途径。     

碗扣式多功能脚手架CO2气体保护自动焊机

采用CO2气体保护焊工艺研制了碗扣式多功能脚手架CO2气体保护自动焊接设备，在零部件尺寸不规范的条件下，利用电、气动机构实现多个工件的同时准确自动装卡及自动焊接，焊缝成形好，质量稳定，提高了生产效率，节约了能源及4／5的劳动力。     

我国股票市场的价值基础及价格泡沫研究

借助剩余收益模型测定了我国股票市场1992年至2002年历年年末的市场价值基础,并探讨了股票市场价格泡沫问题.研究结果表明,尽管上市公司的盈利能力不断下降,但市场的价值基础并未出现明显下降;由于市场的不成熟,我国股票市场中的泡沫成分较多;股价指数及市盈率指标不具有价格泡沫及投资价值的判断功能.