基于遗传算法的公路纵断面优化设计方法

纵断面优化设计是公路优化设计中一个重要的组成部分，遗传算法是一种高效的全局寻优算法。本文介绍了用遗传算法实现纵断面优化设计的具体方法步骤，并编制出了计算机应用程序。经输入公路原始数据进行实例计算，取得了令人满意的结果，证明了遗传算法在纵断面优化设计中的可行性及全局寻优的性能。     

线性拟等重码的检错性能

线性拟等重码是一类特殊的等重码，文中利用码等价和线性拟等重与一阶R—M码的关系研究了线性拟等重码的检错性能；并证明了一类特殊的二元线性拟等重码是最佳检错码，并因此得出延长Hamming码是最佳检错码。     

电潜单螺杆泵油井生产系统优化设计方法

以电潜单螺杆泵油井生产系统为研究对象 ,以油井供液能力 (原油入井流动特性曲线 )、单螺杆泵的特性和整个系统的协调工作为依据 ,利用系统节点分析方法和最优化技术 ,把获得设计产量下的系统效率最高或能耗最低作为优化设计目标 ,介绍了井下电潜螺杆泵子系统基本模型的建立方法 ,并给出了有关的换算关系式、优化设计方法及步骤。利用现场优化设计实例验证了此方法的可行性 ,为油田电潜单螺杆泵油井生产的优化设计提供了理论依据。     

Design Optimization of Charger Based on PSPICE Simulation

The design of a high-frequency switching mode charger (HFSMC) was optimized using a PSPICE simulation of the charging system including a valve regulated lead-acid (VRLA) battery pack and the HFSMC.A high-frequency battery charging circuit model was developed to describe the battery dynamics when charging with DC current having high-frequency ripples. An IGBT circuit model, a high-frequency pulsed transformer coupling model and a silicon fast recovery diode model were also developed. Simulations were compared to laboratory measurements to verify the battery and system models. Simulation of the working states of an Fe-based nanocrystalline magnetic core used in the transformer shows that the transformer design can be optimized by adjusting the core gap and by employing an RC network. Further simulations show that the components in the output unit of the charger main circuit can also be optimized. Simulations also show that the battery dynamics Including the inductance should be considered for design optimization of the HFSMC.     

NURBS曲面造型方法

列举了基于NURBS方法的各种曲面造型方法和相应的数学表达式，同时也对各种方法的适用范围和优缺点进行了评述。     

Optimal Dispatching of Large—scale Water Supply System

This paper deals with the use of optimal control techniques in large-scale water distribution networks. According to the network characteristics and actual state of the water supply system in China, the implicit model, which may be solved by utilizing the hierarchical optimization method,is established. In special, based on the analyses of the water supply system containing variable-speed pumps, a software tool has been developed successfully. The application of this model to the city of Shenyang (China) is compared to experiential strategy. The results of this study show that the developed model is a very promising optimization method to control the large-scale water sup-ply systems.     

高校学科导航资源的知识组织模式及优化

就目前国内外学科资源导航建设现状 ,CALIS学科导航项目建设进展 ,导航库知识组织模式 ,Web站点信息资源的维护方案 ,信息技术对组织模式的影响 ,网络信息资源评价体系的建设方法、指标 ,建立信息质量控制机制和体系 ,信息的优化方案等问题做了探讨 ,分析了网络信息组织的发展趋势 .由此为用户提供具有较高可信度的网络信息资源的有效服务     

采用贫混凝土基层的水泥混凝土路面厚度优化

采用贫混凝土基层的水泥混凝土路面是解决重载交通的一种理想路面形式。贫混凝土基层与水泥混凝土面层的不同厚度组合会对路面荷载应力产生较大的影响,考虑实际路面的各种要求,提出了厚度优化的数学模型。利用三维有限元模型,根据在不同结构形式下的合理目标函数,分析了最佳的厚度组合比。     

旋转式拉臂车优化设计

旋转式拉臂车是一种大载量的拉臂式垃圾运输车,为改善这种车辆的性能,首次对此种类型的拉臂车建立了数学模型,以液压缸的最大作用力与机构的运动平稳性为目标函数进行了优化设计,使其性能得到了改善,研究结果与研究方法对此类型车辆具有一定的指导意义。     

再现轨迹的凸轮连杆组合机构优化设计

分析了再现轨迹凸轮连杆组合机构的运动原理,推导出了计算公式,并给出了该组合机构尺度综合的优化设计方法。