SPS工艺对CuCr/CNTs复合材料组织性能的影响

放电等离子烧结（SPS）工艺可以实现快速烧结成型,且制备出的复合材料致密度高、硬度高、导电和导热性能好、晶粒尺寸均匀.在采用化学气相沉积（CVD）法原位合成分布均匀的CuCr/CNTs复合粉末的基础上,运用不同的SPS工艺制备CuCr/CNTs复合材料.利用扫描电子显微镜、偏光显微镜、数字金属导电率测试仪、微拉伸试验机、显微硬度计等对其组织性能进行表征.结果表明,当烧结温度为750 ℃,烧结压力为45 MPa,烧结时间为10 min,升温速率为80 ℃/min时,制备的CuCr/CNTs复合材料的组织和性能较佳,导电率、硬度和抗拉强度分别为86.8%IACS、95.8（HV）、178 MPa.     

Al涂层/AZ91镁合金复合铸造界面的研究

对型芯预喷涂一层Al涂层,将AZ91镁合金液浇注到铸型中实现基体和涂层的结合,对凝固后的结合界面组织和相组成进行分析。结果表明,AZ91镁合金液和Al涂层表面的氧化物发生反应,实现了界面间的润湿,形成冶金结合界面。该界面包含3个扩散层:镁合金基体一侧为(Al₁₂Mg₁₇+δ_Mg)共晶组织;中间层为Al₁₂Mg₁₇金属间化合物;Al涂层一侧为Al₃Mg₂金属间化合物,并弥散分布着一些氧化物。试验结果证明,通过复合铸造的方法可以实现Al涂层和镁合金基体的冶金结合。     

放电电流对热阴极等离子体化学气相沉积金刚石膜影响

建立了快速沉积高品质金刚石膜的热阴极辉光放电等离子体化学气相沉积新方法. 相对于常规冷阴极辉光放电而言,热阴极辉光放电是一种新型放电形式,具有许多新的特性,其中重要一点是具有较高的放电电流(6.0～10.0 A). 较高的放电电流既是热阴极辉光放电本身的突出特点,同时对于化学气相沉积金刚石膜工艺也产生重要影响. 实验研究了放电电流于金刚石膜沉积速率、表面形貌和热导率的影响,发现由于放电电流影响辉光放电的等离子体区和阳极区,进而对金刚石膜的沉积速率和品质有很大影响. 特别是通过放电电流的提高,可以有效地提高金刚石膜的品质,这对于制备优质金刚石膜产品有重大意义.     

等离子体腐蚀去胶的探讨

首先介绍等离子体腐蚀与采用湿法腐蚀相比所具有的优点,并且在简化工艺流程和缩短工艺周期方面作出细致的说明;对氧气流量为0．05L／min～0．5L／min时腐蚀光刻胶的整个过程中的腐蚀现象进行了描述,绘制出了腐蚀速率曲线图,并进行了理论分析。     

喷射式坑槽修补机集料喷射效率研究

为提高喷射式坑槽修补机集料喷射效率,利用龙格库塔法求解了集料颗粒群的运动微分方程,分析了气流速度、管道内径、管道倾斜角、管道材料和集料空气体积比率对集料输送特性的影响.提出了适用于喷射式坑槽修补机气力输送系统工作效率的评价指标,在多变量条件下分析输送系统压降、功率消耗和工作效率的变化规律.得出了集料空气质量混合比、管道内径和气流速度等参数的设计匹配原则.实验对比结果表明:压降最小时的气流速度误差在10%以内,管道内径只需满足所输送的集料粒径和质量流率即可,高效的集料输送区间可选择集料空气质量混合比8~10,相应气流速度大小为20~25m/s.     

RH精炼钢中全氧量变化与操作改进

为了使钢中全氧量控制在一个适当的水平,在武钢炼钢总厂RH真空脱气装置对低碳、超低碳钢进行了脱氧净化试验.结果表明,影响全氧去除的因素按作用高低依次是出钢溶解氧水平,溶解氧与钢包渣的交互作用,钢包渣,和真空处理净化时间.通过改进工艺生产了全氧量≤10×10-6,非金属夹杂物尺寸<10μm的清洁钢水,建立了一个钢包内钢水全氧浓度随时间变化的新方程,该方程考虑了全氧的表观平衡含量及环流、扩散传质对去除氧化物夹杂速率的影响.     

SiCl_4制备正硅酸乙酯的工艺研究

为寻找一条工序简单、耗价低、易于工业放大路线,实现多晶硅副产物四氯化硅(SiCl4)废物资源化制备正硅酸乙酯(TEOS),本文以多晶硅副产物SiCl4和无水乙醇为原料制备TEOS,在半连续化生产工艺的基础上研究了SiCl4与乙醇的摩尔比、反应温度、反应时间等因素对TEOS产率及纯度的影响。正交实验优化结果表明:15℃下,以恒定速率滴加14.21 g无水乙醇于15 g四氯化硅中,反应35 min,补加8.12 g无水乙醇;55℃下恒温40 min,经减压蒸馏,除去低沸点的乙醇和氯化氢,TEOS产率达到86.61%。对正交实验优水平下制得的产物进行红外光谱(IR)和气相色谱(GC)分析,结果表明:产物中TEOS结构正确,其纯度大于99.0%,达到市售分析纯纯度。     

Magnetoresistance of the thin film ferromagnetic nanoconstrictions

The magnetoresistance and I-V characteristics at different temperatures of the thin film ferromagnetic nanoconstrictions of variable width (from 20 to 250 nm) and 10 nm thicknesses, fabricated by electron beam lithography and vacuum thin film deposition are compared. The magnetoresistance and resistance of the thin film ferromagnetic nanoconstrictions are not related to the width of the nanoconstrictions. Instead the resistance of the local nano-region in the middle of the thin film ferromagnetic nanoconstriction has only a minor role compared to that of the two microscale thin film ferromagnetic electrodes, which contribute the majority of the measured resistance. The magnetoresistances of the thin film ferromagnetic nanoconstrictions and a 0.2 cm × 0.8 cm thin ferromagnetic film deposited under the same conditions were also compared; the thin film ferromagnetic nanoconstrictions have higher magnetoresistances than the thin ferromagnetic film, which implies that the measured magnetoresistance of the thin film ferromagnetic nanoconstrictions comes mainly from the local nano-region in their centers. In conclusion, the measured magnetoresistance of the whole sample is similar to the anisotropic magnetoresistance, because the resistance of the two microscale thin film ferromagnetic electrodes is much higher than that of the local nano-region in the middle of the samples. Comparing the experimental results for the thin film ferromagnetic nanoconstrictions and the thin ferromagnetic film reveals that the magnetoresistance of the local nano-region in the middle of the sample is much higher than that of the two microscale thin film ferromagnetic electrodes attached to it.     

Deep levels,transport and THz emission properties of SiGe/Si quantum-well structures

In coal mines in such countries as China and Russia,most of the coal mine methane(CMM) generated during mining is emitted to the atmosphere without any effective usage,because the methane concentration of CMM is relatively low and not allowed to be used as fuel for safety reasons.Methane is one of the greenhouse gases.Therefore,if it becomes possible to concentrate CMM to an acceptable level for use as fuel,this will greatly contribute to reduction of greenhouse gas emissions.With the aim of gaining approva...     

晶粒尺寸和热处理对Sm2Fe17N3/Fe3N/BN软磁/硬磁复合材料的合成及磁性能影响

采用高能球磨和真空热处理方法制备Sm2Fe17N3/Fe3N/BN复合材料, 并研究球磨过程中晶粒尺寸变化对固态相变和磁性能的影响.  结果表明: Sm2Fe17N3和Fe3N相产生的条件是Fe的晶粒尺寸达到纳米量级（D＜80 nm）并形成Fe(Sm)固溶体; 随着退火时间的增加, 300 ℃真空退火的球磨样品中Sm2Fe17N3的结晶物增多, 矫顽力提高, 表明样品的磁性能与Sm2Fe17N3的结晶程度有关.