基于PC机的无人机仿真系统开发

本文介绍了一个基于PC机的无人机仿真系统,采用MFC单文档-多视图程序框架和嵌入方式的组件化结构,实现由界面层、组织层、功能层构成的仿真程序。介绍了仿真系统的界面和功能。     

可编程序控制器在带锯床控制中的应用

根据对带锯床运动的分析，选用可编程序控制器（ＰＣ）对其动作进行自动控制，对锯带运行速度进行实时监测与显示、工作负荷实测及超载报警与控制．实践证明，设计方案可行．经联机检索表明，属于国内首创．     

超声衍射CT计算公式的改进及其在微机上的实现

超声ＣＴ与Ｘ－ＣＴ的一个重要区别是在通常所用频率范围内物体对声波衍射和反射效应显。本根据被层析成象物体内部各点是次级声源的基本事实，从非均匀介质波动方程出发，在Ｂｏｒｎ近拟下，应用广义Ｆｏｕｒｉｅｒ切片定理和Ｇｒｅｅｎ函数，并引入相移因子，将驼算的参考点取在目标物体上，对散射波原有计算公式作相应变化，导出目标函数与散射场之间的解析关系以及在实际计算时能大大减少重复运算，提高计算程度、缩短处理时     

泥对掺聚羧酸减水剂的水泥浆体分散性的影响

为了揭示含泥量对聚羧酸减水剂分散能力的影响,试验选择净浆流动度和黏度两个指标,研究泥对掺聚羧酸减水剂水泥浆体流变性质的影响,并利用IR、UV手段分析确定了泥的滤液对聚羧酸减水剂分子结构的影响及碱性环境中聚羧酸减水剂在泥颗粒表面的吸附规律。结果表明：当泥取代水泥质量的15%时,聚羧酸减水剂由于泥的存在已无分散效果;增大聚羧酸减水剂掺量可以提高含泥水泥浆体的分散性;泥的滤液不会改变聚羧酸减水剂的分子结构、对聚羧酸减水剂的分散能力无不利影响;在饱和石灰水模拟的碱性环境中,泥对减水剂的吸附很快,初始时间里(6 min内)泥就已经充分吸附了聚羧酸减水剂,泥对聚羧酸减水剂的吸附量为水泥的4倍左右。     

稳定化处理对PC钢筋力学性能指标的影响

PC钢筋是一种高强度的新型工程材料。它的热处理制度为淬火 中频感应张力回火。淬火温度越高,钢筋的强度越高,塑性越低;回火温度越高,钢筋的强度越高,塑性越低。淬火温度和回火温度对钢筋的松弛性能(蠕变率)没有影响。张力对钢筋的强度、塑性没有影响,但对钢筋的松弛性能影响很大:在一定的淬火、回火温度下,随着外加张力的增加,钢筋的松弛性能下降(蠕变率降低)。必须考虑其影响来综合制订热处理工艺参数。     

基于可信第三方的防欺骗视觉密码分享方案

传统的视觉密码方案需要参与者相互验证,因此存在着一系列检测过程,不够简洁、应用不够广泛等问题;基于这一点,提出了一种需要引入第三方的防欺骗视觉密码分享方案;该方案采用异或(XOR)运算,利用可信第三方和受怀疑的分享图像能否恢复出验证图像来实现真实性检验,可直接验证分发者和参与者的欺骗行为,具有方便快捷和不受存取结构限制的特点。     

Patterning the neuronal cells via inkjet printing of self-assembled peptides on silk scaffolds

The patterning of neuronal cells and guiding neurite growth are important for neuron tissue engineering and cell-based biosensors. In this paper, inkjet printing has been employed to pattern self-assembled I₃QGK peptide nanofibers on silk substrates for guiding the growth of neuron-like PC12 cells. Atomic force microscopy (AFM) confirmed the dynamic self-assembly of I₃QGK into nanofiber structures. The printed self-assembled peptide strongly adheres to regenerated silk fibroin (RSF) substrates through charge-charge interactions. It was observed that in the absence of I₃QGK, PC12 cells exhibited poor attachment to RSF films, while for RSF surfaces coated or printed with peptide nanofibers, cellular attachment was significantly improved in terms of both cell density and morphology. AFM results revealed that peptide nanofibers can promote the generation of axons and terminal buttons of PC12 cells, indicating that I₃QGK nanofibers not only promote cellular attachment but also facilitate differentiation into neuronal phenotypes. Inkjet printing allows complex patterning of peptide nanofibers onto RSF substrates, which enabled us to engineer cell alignment and provide an opportunity to direct axonal development in vitro. The live/dead assay showed that printed I₃QGK patterns exhibit no cytotoxicity to PC12 cells demonstrating potential for future nerve tissue engineering applications.     

一种无需操作系统的硬件级可信度量方法

针对云计算等新型计算环境下的可信度量问题,提出了一种无需操作系统的硬件级全盘任意文件可信度量方法.通过在U-key中放置可信度量代理(TMA),利用TMA自主解析文件系统获取磁盘中任意文件的扇区存储地址,从而能够在不存在Grub、未启动操作系统以及不需要其他任何硬软件支持的情况下,实现对全盘任意文件的可信度量.考虑到TMA的安全性,利用B方法实现了对TMA的形式化开发.与已有的工作相比,所提方法不仅能够应用在云计算等新型计算环境中,而且能够应用于不存在可信平台模块(TPM)等安全增强芯片的普通计算机上.实验证明了本方法是有效的.     

A trusted mobile payment environment based on trusted computing and virtualization technology

In this paper, we propose a trusted mobile payment environment （TMPE） based on trusted computing and virtualization technology. There are a normal operating system （OS） and a trusted OS （TOS） in TMPE. We store the image of TOS in a memory card to hinder tampering. The integrity of TOS is protected by means of a trusted platform module （TPM）. TOS can only be updated through a trusted third party. In addition, virtualization technology is applied to isolate TOS from normal OS. Users complete ordinary affairs in normal OS and security-sensitive affairs in TOS. TMPE can offer users a highly protected environment for mobile payment. Moreover, TMPE has good compatibility in different hardware architectures of mobile platforms. As the evaluation shows, TMPE satisfies the requirement of mobile payment well.