基于MPI的二维经验模分解并行算法

针对二维经验模分解(BEMD)处理大尺寸图像耗时较长的问题,提出了一种基于MPI技术的BEMD并行算法.对BEMD串行程序中极值点选取、平面三角剖分、三角域内数值插值等几个主要部分的运行时间进行了统计,结果表明三角域内数值插值是耗时的主要部分,也是并行化的重点处理部分;随后在高性能计算平台上构建并行环境,基于MPI技术对BEMD算法的包络面生成部分实现了并行化,具体方法是先将剖分后的三角形序列按照进程数均匀划分,使整个图像分割为若干子区域并分配给相应进程,然后各进程拟合出对应子区域的上下Bezier曲面并由0进程进行合并,进而生成上下包络面;最后通过加速比等指标对该算法进行测评.结果表明,算法在30核并行执行时加速比可达20.1396,利用率为64.97%,运行效率的提升较为明显.在数据量达到原始数据的25倍时可扩展性指标为1.3975,表明该算法对大数据量的任务有很好的适应性.      

五轴联动刀具路径NURBS插补技术

针对复杂曲面五轴加工直线圆弧插补的不足,对五轴加工NURBS插补算法进行相关研究,同时对NURBS插补过程中插补点的曲率分析计算,推导出插补误差与进给速度的关系,实现用进给速度对插补误差自适应地调整。最后,针对双转台五轴数控机床,基于IMSPOST开发了具有NURBS插补的专用后置处理器,实现了NC 程序的输出。实验结果表明：该技术方法提高了刀具运动平稳性和加工精度,优化了加工精度与加工效率,为五轴NURBS插补加工提供了理论指导。     

Discovering non-terminating inputs for multi-path polynomial programs

This paper investigates the termination problems of multi-path polynomial programs （MPPs） with equational loop guards. To establish sufficient conditions for termination and nontermination simultaneously, the authors propose the notion of strong/weak non-termination which under/over- approximates non-termination. Based on polynomial ideal theory, the authors show that the set of all strong non-terminating inputs （SNTI） and weak non-terminating inputs （WNTI） both correspond to tile real varieties of certain polynomial ideals. Furthermore, the authors prove that the variety of SNTI is computable, and under some sufficient conditions the variety of WNTI is also computable. Then by checking the computed SNTI and WNTI varieties in parallel, termination properties of a consid- ered MPP can be asserted. As a consequence, the authors establish a new framework for termination analysis of MPPs.     

语音插空技术在单路模拟信道中的应用

从单路模拟信道出发,在分析话音通话特点的基础上,介绍了实用话音通断信号的提取方法,话音插空技术及利用此技术实现话音/数据共信道传输的基本原理和复帧结构.     

一类n项和数的表达式

用Ｃｈｅｂｙｓｈｅ多项式的零点为节点的Ｌａｇｒａｎｇｅ多项式逼近高阶多项式时，误差公式中出现一类ｎ面和数。现给出此类和表达式，并用归纳法证明之。     

Prediction of Flexural Deformation of Reinforcement Concrete Beams with Polynomial Tension Stiffening Model

Based on an assumption of parabolic bond stress distribution,a simplified model with quartic polynomial function of the relative slip of steel bar and surrounding concrete for reinforced concrete (RC)tensile member was proposed. The post-cracking behavior as well as tension stiffening effect was considered in the new model. The relative slip of bending member could also be determined through the extension of the new model,which could be applied to obtaining the concentrated rotations at certain sections in order to predict the flexural deformation of RC beam. Several examples of four-point bending RC beams were approached to verify the new model,and the predictions of the flexural deflections of RC beams agreed well with experimental results. The new model can be extended to the application of partially corroded RC beam.     

On convergence for trigonometric interpolation of analytic function

In this paper, we give a necessary and sufficient condition of sequence of nodes, such that, the error of trigonometric interpolation for analytic function converges to 0. Foundation item: Supported by the Science Foundation of SEC of China and Foundation of Wuhan University Biography: LIU Hua (1971-), male, PH. D candidate, Research interest is in complex analysis.     

Real interpolation betweenB-valued martingale Hardy spaces

The interpolation spaces between Banach-space-valued martingale Hardy-spaces, between Hardy and BMO spaces are identified respectively. Some results obtained here are connected closely with the convexity and smoothness of the Banach space which the martingales take values in. Foundation item: Supported by the National Natural Science Foundation of China Biography: YU Lin (1965-), male, Ph. D. Candidate. Current research interests are in geometry of Banach spaces and Banach-spacevalued martingale theory.     

B-值Dirichlet级数确定的整函数的(p,q)(R)级和(p,q)(R)型

利用Newton多边形研究了B-值Dirichlet级数确定的整函数的增长性,较方便地得到了B-值Dirichlet级数的(p,q)(R)级及型和下(p,q)(R)级与系数关系的若干结果.     

脉冲增量法直线插补算法的改进

本文对传统的数控直线插补方法进行了算法改进 ,使插补过程中各坐标轴分配的脉冲序列保持均匀 ,以克服步进电机失步问题 ,提高了插补精度