以秀丽隐杆线虫为模型的玛咖功效评价

先对玛咖进行脱油、水提、冻干,再将所得水提物冻干品与Escherichia coli OP50菌液进行混合,稀释至终质量浓度为1,2mg/mL.以秀丽隐杆线虫(简称线虫)为模型,考察玛咖水提物对线虫的抗氧化作用:经寿命、产卵、吞咽、运动能力实验表明,玛咖水提物对线虫无明显毒性作用,且1,2mg/mL玛咖水提物均能显著延长线虫寿命;由玛咖水提物对线虫热激氧化压力诱导表明,玛咖水提物对线虫体外热激氧化压力有保护作用;通过油红O对脂肪染色表明,玛咖水提物具有一定降脂功效.     

基于SIFT的车标识别算法

针对车标识别过程中匹配阈值难、识别速度慢的问题,提出一种基于尺度不变特征变换(SIFT)的特征匹配车标识别算法.利用SIFT算子对图像的视角、平移、放射、亮度、旋转等不变特性进行提取,并采用BP神经网络算法自主选取车标图像特征进行分类、匹配和识别.仿真实验结果表明,简单车标和复杂车标的识别率平均值均达90%以上,该算法识别速度较快、识别率较高,能满足实际应用的需要.     

左截断右删失数据下尺度参数与协变量相关时广义指数分布的估计及应用

在左截断右删失数据类型下,当时间变量T服从广义指数分布时,针对尺度参数是否受协变量影响建立两种模型,并用极大似然估计法给出参数估计,用Newton-Raphson算法求解参数估计.将两种模型分别应用到变压器寿命数据集和Channing house数据集中,得到了其生存函数和风险函数.     

放射源~(226)Ra和~(133)Ba的衰变γ能谱分析

采用p型同轴高纯锗探测器测量含~(226) Ra的荧光仪表盘与标准源~(133) Ba的衰变γ能谱,并分析特征γ射线的能量和强度.结果表明:~(226) Ra能谱中出现~(226) Ra的特征γ射线及大量~(226) Ra的衰变子核的特征γ射线;~(133)Ba谱中出现~(133)Ba特征射线及大量和峰,由计数率随距离变化关系及γ射线级联关系证明存在和峰.     

一维柔性双吡啶四唑基铜配合物的合成、结构及染料吸附性能

以氯化铜、柔性双吡啶四唑配体(4-bptzp)和5-硝基间苯二甲酸(5-H_2nip)为原料,在水热条件下自组装,制备一种新型的铜配合物[Cu(4-bptzp)(5-nip)]·H_2O,并利用粉末X射线衍射、单晶X射线衍射等对其结构进行表征.结果表明:该铜配合物的分子式为C_(69)H_(56)Cu_3N_(33)O_(21),Mr=1 874.09,三斜晶系,P1空间群,V=3.984 5(4)nm3,a=1.277 09(8)nm,b=1.357 97(9)nm,c=2.433 64(16)nm,α=76.727(10)°,β=75.987(10)°,γ=85.579(2)°,Z=2,R_(int)=0.038 6,D_(cal)=1.562g/cm~3,μ=0.888 mm~(-1),F(000)=1 912,R=0.051 9,wR_2=0.124 2;铜离子被5-nip桥连形成一维[Cu_2(nip)_2]n带状链结构,配体4-bptzp连接链上的两个铜离子形成[Cu_2(4-bptzp)_2]环悬挂在链两侧;该铜配合物在黑暗条件下可快速吸附水溶液中的有机染料亚甲基蓝.     

一种新型冷轧辊用钢的组织演变

本文以一种新型冷轧辊用钢为研究对象,借助金相显微镜和扫描电子显微镜分析了试验钢在正火、球化退火、淬火、回火过程中的组织演变,研究了碳化物的成分变化和溶解析出行为。结果显示,试验钢正火后得到马氏体+部分颗粒状和少量块状碳化物的显微组织;球化退火后的显微组织为铁素体基体上分布有大量颗粒状碳化物+少量块状碳化物,球化退火组织评定为为2~3级;淬火后的组织为马氏体+部分颗粒状和少量块状碳化物;三次回火后的组织为回火马氏体+部分颗粒状和少量块状碳化物。试验钢中的块状碳化物在整个热处理过程中始终存在,1100℃以下奥氏体化时只发生边缘部分的少量溶解。颗粒状碳化物主要为M23C6型,在热处理过程中存在明显的溶解和析出行为,1100℃以下奥氏体化时部分溶解。     

Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering

To investigate the change of the mechanical properties of soft metals doped PVD(Physical Vapor Deposition)coatings after the migration of soft metal to the surface, TiN-Cu coating was deposited on Si(100) by magnetron sputtering. The microstructure and mechanical properties at room temperature and after vacuum heat treatment at 300 ℃ were investigated. The results showed that the grains were clustered and the microstructure was porous for TiN-Cu coating at room temperature, while many micro-and nano-sized Cu particles were observed on the surface after vacuum heat treatment at 300 ℃. The elastic properties of the TiN-Cu coating after vacuum heat treatment at 300℃ degraded compared with that at room temperature. The hardness and elasticity modulus of TiN-Cu coating kept constant(3.7 GPa and 125.0 GPa, respectively) with the increase of nano-indentation depth, while the hardness and elasticity modulus of TiN-Cu coating after vacuum heat treatment at 300 ℃ increased gradually.     

Effect of minor Sc on the microstructure and mechanical properties of AZ91 Magnesium Alloy

The as-cast and heat-treated microstructures and mechanical properties of the AZ91 magnesium alloys with and without minor Sc addition were investigated and compared in this paper. The results indicated that adding0.15–0.45 wt% Sc to the as-cast AZ91 alloy not only could modify and refine the Mg_(17)Al_(12) phase but also suppress the formation of the Mg_(17)Al_(12) phase. At the same time, the grains of the Sc-containing as-cast AZ91 alloys were also effectively refined. As a result, the mechanical properties at room temperature(RT) for the Sccontaining as-cast AZ91 alloys were effectively improved. In addition, adding 0.15–0.45 wt%Sc to the AZ91 alloy promoted the formation of the continuous precipitates(CP) during the aging treatment in spite of that the formation of the discontinuous precipitates(DP) was simultaneously suppressed. Accordingly, the Sc-containing as-aged AZ91 alloys obtained the relatively higher mechanical properties at RT than the as-aged AZ91 alloy.     

露天边帮下紧邻尾矿库采空区地表充填治理方法

针对采空区废石充填常规处理方法难度大、费用高、安全性差等问题,结合排山楼金矿条件,研究了控制诱导冒落协同地表充填塌陷坑的采空区充填治理方法,包括采用RG井下电视监测评估空区冒落进程,从地表钻井充填保护露天坑尾矿库,崩落矿柱诱导空区冒透地表,地表充填塌陷坑恢复地貌,客土造田与恢复地表使用功能等方法.该方法用于排山楼金矿,使大型活动空区得到安全高效充填治理,取得了良好的技术经济效果.理论分析与实践表明,露天边帮下紧邻尾矿库的倾斜矿体采空区控制诱导冒落协同地表充填的治理方法,可减小采空区废石充填治理的难度,实现大型采空区安全高效治理.     

铝锡轴承合金的摩擦磨损机理与性能

铝锡轴承合金对大型载重汽车、坦克、高速汽车、拖拉机等的高速高压柴油机的发展有重要的意义。提高铝锡合金的耐摩擦磨损性能可节省大量能源并延长零件的使用寿命,如何取得具有优良的耐摩擦磨损的铝锡合金成为研究的重点。本文介绍了提高铝锡合金的耐摩擦磨损性能的措施及其影响因素,总结铝锡合金中锡元素含量改变、合金元素的添加、热处理与制备工艺的改变对铝锡合金的显微组织以及耐摩擦磨损性能的影响。