古典概型问题的数学模型

在古典概型问题中引入了n次随机试验,n维样本点,n维随机事件和n维样本空间等概念,对解决古典概型的应用问题提供了相应的数学模型.     

Dynamic density forecasts for multivariate asset returns

We propose a simple and flexible framework for forecasting the joint density of asset returns. The multinormal distribution is augmented with a polynomial in (time‐varying) non‐central co‐moments of assets. We estimate the coefficients of the polynomial via the method of moments for a carefully selected set of co‐moments. In an extensive empirical study, we compare the proposed model with a range of other models widely used in the literature. Employing a recently proposed as well as standard techniques to evaluate multivariate forecasts, we conclude that the augmented joint density provides highly accurate forecasts of the ‘negative tail’ of the joint distribution. Copyright © 2010 John Wiley & Sons, Ltd.     

石灰土填料抗剪强度试验研究

模拟石灰土在工程中的应力状态,利用静三轴CU试验研究了石灰土的应力-应变关系及强度特性,探讨了在不同石灰掺入比的情况下石灰土抗剪强度指标的变化规律,分析了素土和石灰土的变形破坏模式;采用扫描电镜(SEM)照片及能谱分析(EDS)研究了掺灰比不同的石灰改良土的微观结构和矿物构成,并结合三轴实验结果,从微观结构上研究了石灰...     

硫酸钛为钛源制备二氧化钛的实验条件研究

实验以硫酸钛为钛源、尿素为沉淀剂、聚乙二醇600为分散剂,采用均匀沉淀法制备二氧化钛粉末。主要讨论了影响沉淀形成时间的主要因素:尿素的用量及加入方法、聚乙二醇的用量、以及水浴的温度等。实验结果表明,以硫酸钛为钛源、尿素为沉淀剂、聚乙二醇600为分散剂,采用均匀沉淀法制备二氧化钛粉末最佳反应条件为:在水浴加热343 K条件下,将尿素缓慢滴加到硫酸钛和聚乙二醇600的混合液中,硫酸钛和聚乙二醇600的混合液在磁力搅拌器搅拌时滴加尿素,用硫酸调节pH在1.5~2,保持硫酸钛、尿素和聚乙二醇600的摩尔比1∶12∶0.01。     

New cooperative frequency domain differential modulation and demodulation

An innovative method of cooperative frequency domain differential modulation and demodulation is presented.This method applies the prior knowledge of channel propagation to selecting the variable differential length and carrying out frequency domain modulation.This strategy optimizes the design of system parameters to effectively improve the anti-interference ability of the differential system in time-varied multipath channel circumstance without making the execution more complicating.The simulations and comparisons demonstrate the proposed method is effective,and the results show that it is especially suitable for the fading channel with strong propagation and fast time-variation.     

一种有效估计着陆引导信号多径时延的方法

利用导航信号收发已知且具有周期性的特点,提出了一种对着陆引导信号多径时延进行有效估计的方法。该方法首先计算相关函数,而后对相关函数进行二次微分,对时延值进行初步估计。最后通过直线拟合算法和比例拟合算法提高估计精度。通过计算机仿真,验证了算法的有效性。该算法具有在低采样率的条件下,估计精度高的特点。     

Optimum design of equivalent accelerated life testing plans based on proportional hazards-proportional odds model

The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented.The defined equivalent test plan is the test plan that has the same value of the determinant of Fisher information matrix.The equivalent test plan of step stress accelerated life testing(SSALT) to a baseline optimum constant stress accelerated life testing(CSALT) plan is obtained by adjusting the censoring time of SSALT and solving the optimization problem for each case to achieve the same value of the determinant of Fisher information matrix as in the baseline optimum CSALT plan.Numerical examples are given finally which demonstrate the equivalent SSALT plan to the baseline optimum CSALT plan reduces almost half of the test time while achieving approximately the same estimation errors of model parameters.     

炼钢厂连铸机的开浇时间决策优化模型

针对炼钢厂连铸机开浇时是否连浇以及开浇时间确定等问题,从钢厂生产线上待加工的铁水/钢水金属资源平衡的角度,建立了以连铸生产总效益最大为目标函数的连铸机开浇决策的混合整数规划模型,并用基于MATLAB软件的YALMIP优化工具进行模型的求解.针对某钢厂的实际情况进行模型的应用测试,结果表明:模型可以优化决策连铸机各浇次的开浇时间,有助于编制合理的炼钢厂生产调度作业计划,稳定各班次之间的生产条件,降低生产线上的积压金属量,为炼钢厂连铸机的有序开浇提供了技术手段.     

大圆坯连铸结晶器电磁偏心搅拌的数值模拟

建立了描述大圆坯连铸结晶器电磁搅拌过程电磁场的三维数学模型,并采用实测数据对模型的准确性进行了验证.研究了不同搅拌电流强度和频率下,磁感应强度与电磁力的变化规律,并重点分析了偏心搅拌下磁感应强度和电磁力的分布特点.结果表明:磁感应强度和电磁力均随搅拌电流强度的增大而增强;随着搅拌电流频率的增大,磁感应强度逐渐减弱,而电磁力先增强后减弱,并在2.5 Hz时达到最大值;偏心搅拌时,电磁力在铸坯横截面上仍呈周向分布,但电磁力和磁感应强度的大小都出现了不对称分布,在靠外弧的一侧更大.     

堆积型滑坡地震响应的离心模型试验

基于离心振动台模型试验,采用Taft波激励,不断增大其幅值,研究不同强度地震波作用下堆积型滑坡地震响应特征,对比分析了汶川地震清溪台站基岩波结果的异同.结果表明:坡面水平向和竖直向峰值加速度放大系数均随坡高增加而增大,呈现高程放大效应;坡体内水平向峰值加速度放大系数分布与坡面不同;坡面对输入地震波有反射作用并呈现坡面浅表放大效应;基岩水平向加速度随高程增加存在增大现象,与地震动输入相比,均有缩小现象.同一高程处,坡面水平向与竖直向、坡体内及基岩水平向峰值加速度放大系数随地震波幅值的增大其变化规律不同.