Isolation and purification of BVⅠ-2H from bee venom and analysis of its biological action

The medical use of bee venom for rheumatoid arthritis ( RA ) has a very long tradition. In this study, isolation and purification of polypeptides from bee venom were carried out on sephadex chromatography, heparin sepharose CL-6B chromatography and HPLC. Several fractions were extracted, and their effects on activation of splenocyte and THP-1 cell were studied. The inhibitory fraction was selected for further studies. Finally, BVⅠ-2H that the HPLC elution profiles was a single peak was isolated by C8 column. ESI- MS detection results showed that BVⅠ-2H was a fraction of bee venom, and the molecular weight of the major component was 644.8. BVⅠ-2H could inhibit ConA-induced splenocyte proliferation, IL-1 production and interfere with splenocyte cycle in mice. Moreover, BVⅠ-2H could inhibit PMA-induced TNFα production in THP-1 cells, which was due to its inhibitory effects on TNFα mRNA expression and protein phosphorylation of IκBα. Our studies indicated that BVⅠ-2H was one of the anti-inflammatory components of bee venom.     

器官发育及细胞程序化死亡的基因调节研究

用线虫实验模型系统研究调节器官发育及细胞程序化死亡的基因，且发现这种基因在人体中也存在，这一成果获得了2002年诺贝尔生理学医学奖。“程序性细胞死亡”机理的发现为艾滋病、肿瘤和癌症等疾病的治疗提供了寻找新方法的可能，将在人类战胜疾病过程中发挥重要作用。     

基于改进等分节点法的启发式布局算法

针对集成电路标准单元模式的布局问题，提出了一个全新的基于改进等分节点法的启发式标准单元布局算法(TETP)，该算法在优化布局过程中采用改进的等分节点法寻找单元目标位置，同时结合局部寻优的启发式算法，对MCNC(Microelectronics Centre of North-Carolina)标准单元测试电路进行实验。结果表明，与布局工具Timber Wolf7．0和FengShui相比，电路布局的总线长度分别平均减少了16％和17％。     

射频溅射金属前驱体硫化法制备的Cu2ZnSnS4薄膜

采用射频溅射技术沉积Cu／Sn／Zn金属前驱体叠层结合硫化技术在玻璃衬底上成功制备了Cu2ZnSnS4薄膜。X-射线衍射分析表明，通过优化制备条件可以获得单一黝锡矿结构且具有（221）择优取向的Cu2ZnSnS4薄膜。霍尔效应和紫外可见透过谱测量表明，样品的薄膜电阻、吸收系数和光学带隙分别达到0．073Ω·cm，10^4cm^-1和1．53eV，具有适合作为薄膜太阳电池吸收层应用的可能性。     

构树形成层细胞超微结构的周期性变化

构树(Broussonetia papyrifera)形成层细胞超微结构具有明显的季节性变化,休眠期形成层带细胞壁比较厚,具有许多小液泡,细胞核占细胞体积较大,核质稀疏,内质网为光滑型,核糖体分散在细胞质中,脂质体较多,活动期形成层带细胞层数较多,细胞壁比较薄,纺锤状原始细胞中具1—2个大液泡,而射线原始细胞具许多分散的液泡,这在双子叶植物中还未报道过,细胞质沿细胞壁分布,核膜明晰,核质浓密,内质网为粗糙型,上面附有大量的核糖体,脂质体较少,在休眠和活动期都有淀粉积累,线粒体、微管和内质网大量分布在初生纹孔场附近,而且有大量的小泡沿细胞壁分布,这有可能与细胞壁的形成有关。     

软土中薄硬夹层的夯扩桩工程实践

结合工程实践对夯扩桩在软土中薄硬夹层的应用进行了探讨,提出薄硬夹层作为桩端持力层的加固方法.     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

超微粒子－有机聚合物薄膜的研究

我们用离子团束－飞行时间质谱（ＩＣＢ－ＴｏＦＭＳ）系统制备了金（Ａｕ）超微粒子－聚乙烯（ＰＥ）薄膜和Ｃ＿（６０）－聚乙烯薄膜。用透射电子显微镜（ＴＥＭ）分析了所制备的样品。它们的结构是Ａｕ超徽粒子镶嵌在多晶的ＰＥ薄膜中，其中Ａｕ原子团呈球形，直径分布在２．０－５．０ｎｍ窄范围内，当沉积基底温度为９０℃时，Ａｕ原子团相互靠近，几乎连接起来，但仍保持原来大小。基底温度为１４０℃蒸积的Ｃ＿（６０）－ｐＥ薄膜具有晶态结构，其晶格常数为１．４５４ｎｍ。     

化学气相沉积法制备光谱选择性碲膜

用化学气相沉积法制备碲薄膜,其步骤为：通过电化学方法制得碲化氢,碲化氢在室温下分解后在聚乙烯塑料箔上沉积得到碲薄膜.用傅里叶红外光谱仪、紫外/可见/近红外光谱仪、X射线衍射仪及扫描电镜表征碲薄膜的光学性能和结构.结果表明,化学气相沉积法在Mn-O覆盖的聚乙烯塑料箔上沉积得到的碲薄膜在大气窗口（8～13μm）光谱区域具有很高的透过率,同时能阻挡几乎所有的太阳光谱,表明碲薄膜是适用于辐射制冷装置的太阳光辐射屏蔽材料.     

神经网络在成组技术方面的应用

阐述了成组技术及其在高级制造技术中的作用，在此基础上描述了神经网络在零件编码分类系统中的应用以及用神经网络设计制造单元的方法。