铝合金变形抗力的实验研究

采用恒应变速率凸轮式形变压缩试验机试验了四种铝合金材料的变形抗力 ,分析了应变率和应变速率对变形抗力的影响 ,结果表明随应变的增加 ,变形抗力以近似幂函数关系增加 ,在此基础上建立了简单、适用的变形抗力计算模型     

Principle of Mangling Correction of Plate-welding Section Steel and its Application

Thanks to the fantastic development of power, transportation, chemical engineering, architecture and other fields, there has been an increasing demand for new type of section steel with large sections used for construction frame, such as type-H, type-T, and type-C section steel. New types of section steel usually are long and with large cross section. Therefore, for the sake of the cost, steel plate welding structure is used home and abroad. During the welding process, welding distortion seems unavoidable. ...     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

小区暖气失调原因调查和改造方案的实施

通过对镇苑小区采暖情况的跟踪调查及数据采集，找出了供暖系统不热的原因，据此对系统进行了针对性的改造，取得了良好的改造效果。     

火力发电厂高温过热器爆管分析

针对广州发电厂3号锅炉高温过热器发生爆管的情况，通过化学成分分析、力学性能试验和金相检验，认定原管子材质符合设计要求。在金相检验中，发现爆管处存在大量蠕变孔洞及裂纹，从而判定此次爆管是在高温和外弧切向最大拉应力作用下引起的蠕变脆性断裂造成的。     

A new model for the life prediction of GH4133 under TMF conditions

Thermal mechanical cyclic strain tests were carried out under in-phase and out-of-phase conditions on a Nickel-base Superalloy GH4133 in the temperature range of 571-823℃. Based on analyzing the present models of TMF (thermal mechanical fatigue) life prediction, a new model for predicting nickel-base superalloy TMF lifetime was proposed.TMF life of superalloy GH4133 was calculated accurately based on the new model. Experimental TMF life has been compared with the calculatedresults and all results fall in the scatter band of 1.5. The calculating results show that the new model is not only simple, but also precise. This model will play great roles in life prediction of the metal materials and the engineering components subjected to non-isothermal service conditions.     

黄土滑坡形变分析预报方法研究

基于黄土滑坡的变形特征和演化规律，利用滑体总形变量与滑坡演变过程形变量之间的逼近关系，建立了一种简单，实用的滑坡预报数学模型，其效果良好，为黄土滑坡时间预报由定性分析向定量评价提供了途径。     

地下含水层热储井位置选择和布置

地下含水层热储开发技术面临一系列问题,寻找适合热储用的含水层和合理布置热储井是解决问题的第一步.综合考虑含水层的地质结构特征,适合热储的含水层应该是承压含水层,热储应该采用同层方式.单个热储井的影响半径可以通过热平衡和热扩散原理求得.合理布置热储井间的相对位置,可以有效抵消原有地下水的流动以及渗流系数不一致的影响.利用井之间的渗流耦合作用,在热储井之间布置调节井,主动控制热储水的波及范围,可以实现热储井布置的相对"紧凑".     

一种新的保费定价原理及其性质

K—阶均值保费定价原理具有成比例性、次可加性、保持随机序等等性质,揭示出它与较为熟悉的几种保费定价原理之间的联系。