Evaluation of Woven Fabrics for Comfort Properties in Children’s Summer Wear

This paper evaluates the comfort properties of eightkinds of woven fabric commonly used for children'ssummer wear in Hong Kong,China.Due to the expan-sion of children's wear market and the quality require-ment for parents,objective and subjective measurementsare the main methods used to evaluate the chosen fabricsfor garment deslgners and consumers as reference. Objective measurement was carried out through ex-periments by means of the Kawabata Evaluation Systemfor Fabrics(KES-F).Experimental tests on fabrics in-clude compression,surface,bending,air permeability,thermal and tensile.Subjective measurement was con-ducted by a market research on consumers' opinions onfabrics for children's summer wear in the form of ques-tionnaire survey.These two ways of measurement onfabrics were analyzed and compared. It was found that Fabric Sample 6 which is com-posed of polyester and cotton fibre has the best perfor-mance in terms of its comfort properties.Besides,Sam-ple 4 composes of rayon and cotton fibre also ha     

Research on Tearing Property of Reinforced Plastic Film with Bi - axial Warp Knitted Fabric Skeleton

The specification of laid-in and warp yams,thedensity of fabric and the specification of groundyam are of great importance when the bi-axialwarp knitted fabric being knitted.In this paper,the tearing property of the reinforced plastic filmwith bi-axial warp knitted fabric skeleton istested and analyzed.The resuits show thatamong the three factors,the specification of laid-in and warp yam has the greatest influence onthe tearing strength of the reinforced plastic film,while the rest of them has secondary and lesseffect respectively,and there is exponential re-lation between the tearing strength of the rein-forced plastic film and the number of yams in thedirection of force.     

基于熵和变异度的织物疵点图像分割方法

针对现有织物疵点图像分割方法对光照不均匀敏感的问题,提出了一种基于局部熵和变异度的织物疵点图像分割方法。首先对织物图像进行局部熵和变异度计算,提取疵点的类边缘和区域信息;然后基于人工神经网络脉冲耦合（PCNN ）的区域生长法分割织物疵点图像。通过对T ILDA数据库中的疵点图像和基于线阵CCD在线检测的织物疵点图像进行测试,并与已有的相关方法进行对比实验和评价。结果表明,该方法不仅能有效地抑制光照不均匀和复杂背景干扰的影响,而且分割质量有了明显改进。     

配电网智能开关循环式远动规约CDT的设计

配电网智能开关通信系统采用RS485总线,适合与采用循环式远动规约CDT的上位机或主站系统实现通信,以固定的传送速率循环不断地向调度端发送遥测、遥信、数字量、事件顺序记录等数据。根据循环式远动规约CDT的定义以及配电网智能开关采集信息的种类和特点,对循环式远动规约CDT进行简化,根据配电网的特点,对开关操作取消遥调功能,完整地设计了配电网智能开关与上位机通信的循环式远动规约CDT协议,数据传输过程中采用了8位CRC循环检验码进行校验,避免由于线路噪声或其他的干扰使信息码产生错误,最后采用C++程序设计语言实现了该通讯协议。     

Three-Dimension Parametric Simulation of Knitted Fabric Based on the Twisted Loop Model

To enhance the realistic simulation effect of knitted fabric, a new three-dimension （3D） twisted loop model was proposed. This model was constructed by using Non-uniform Rational B-Spline （NURBS） surface. The control points of this surface were generated through rotating the cross-section along the center path of yarn. The cross-section of yarn was generated based on the two-level hexagonal ~lose packing model. Both of the center path and the cross-section were fitted by NURBS. With this twisted loop model, 3D parametric simulation of knitted fabric was realized in 3DS MAX by utilizing MAXScript and analyzing the relationships between structure parameters （including the wale-spacing, the course-spacing, the yarn diameter, .and the fabric thickness） and geometric model. The simulation of knitted fabric has 3D realistic twist effect dearly. Furthermore, the structure parameters and the twist parameters of fabric can be modified interactively.     

并联式混合动力新型有源传动装置动力换档特性

开发了一种基于定轴齿轮传动方式并集成电机的新型混合动力车用有源传动装置,通过自动切换机构,电机可选择性地与变速器输入轴或输出轴建立动力传递路径.一方面当电机与输入轴连接时,可利用档位速比实现高效驱动;另一方面在换档时,电机可通过短时与输出轴连接,实现无动力中断换档.完成了EMT(electrified manual transmission)的动力性匹配设计,并通过仿真分析详细说明了EMT实现无动力中断换档的过程.结合第一轮样机的开发及台架试验,考察了换档期间电机维持车辆动力不中断的能力.     

广西龙湾铅锌矿床矿石矿物组构特征及成矿阶段划分

通过井下的详细勘查和显微镜下鉴定,对广西龙湾铅锌矿床的矿石组构特征进行了系统研究.矿区矿石构造主要为块状构造、浸染状构造、网脉状构造和斑杂状构造;结构主要为结晶作用和交代作用形成的结构,其次为固溶体分离作用、结晶物质重结晶作用和压力作用形成的结构.同时将成矿期次分为沉积成岩期、中低温热液成矿期和表生氧化期,其中热液成矿期是矿床的主要成矿期.根据矿物组合特征,将成矿划分为五个成矿阶段,分别是黄铁矿-石英-方解石阶段、闪锌矿-方铅矿-黄铁矿阶段、黄铁矿-闪锌矿-方铅矿-黄铜矿阶段、石英-方解石阶段、氧化物阶段.矿物的生成顺序为黄铁矿1-闪锌矿(黄铜矿1)-方铅矿-黄铁矿2-黄铜矿2.最终确定龙湾矿床为受构造活动控制的中低温热液充填交代-叠生改造型多金属矿床.     

基于过零点投切的智能电力电容器设计

针对电网低压侧无功补偿装置结构复杂以及投切时存在大量涌流等问题,采用过零点投切技术,研制开发了具有高集成、无涌流和低成本等优点的新型智能低压电容器.利用MATLAB对不同残压下投入电容器的系统模型进行了仿真,并与实际应用中电网电压为零时投入电容器的实验结果进行分析比较.结果表明,晶闸管两端电压过零时投入电容器无涌流.     

双风机双电源自动切换技术的应用

针对北山煤业有限公司矿井机械化升级改造,采掘工艺由炮采炮掘变为综采综掘,原有通风系统已经不能满足安全生产的需要,为了提高矿井的安全性并满足生产实际的需要,根据《煤矿安全规程》第128条规定,提出了双风机双电源自动切换技术。实践证明,双风机双电源自动切换技术在瓦斯浓度保持在0.3%以下时,可达到规定要求,并降低了通风故障率,杜绝了无计划停风现象。     

大学生电动方程式汽车的安全回路设计

安全回路通过碰撞开关来保证赛车在受到撞击等极限情况下断开高压回路。通过绝缘检测系统检测高压端和接地端是否存在电压差,来判定整个赛车是否绝缘,同时采用KM自锁电路来保证绝缘,以便电气安全人员排除故障,并进行手动复位。经过实际测试,安全回路稳定、可靠、适应性强,可以有效地保证车手的安全,提高赛车的驾驶安全性。