拦截器姿态控制系统切换控制方法研究

为增强拦截器姿态控制系统的鲁棒性,提出了一种切换控制方法来控制拦截器的姿态。该切换控制方法主要包括双重推力水平切换,相平面控制律与准滑模控制律切换和角度反馈切换。给出了高水平推力和低水平推力的切换逻辑,相平面控制与准滑模控制律的切换准则和角度反馈中俯仰角和攻角的切换策略。仿真实验表明,采用切换控制方法所设计的姿控系统可以适应大气层内外飞行,鲁棒性较强。     

一种多路聚合型CICOQ交换结构

提出了一种多路聚合型联合输入/交叉节点/输出排队(CICOQ)交换结构,并从理论上证明了当聚合路数等于2时,多路聚合型CICOQ交换结构无需加速即可通过分布式调度算法实现模拟采用任意调度算法的输出排队交换结构。最后从实现的角度给出了多路聚合型CICOQ交换结构的工程设计方案,并通过仿真对该方案的性能进行了验证。     

Magnetic fabrics in fault-related fold and its relation with finite strain: an example from Mingjiang thrust structures in Western Sichuan

The anisotropy of magnetic susceptibility (AMS) is a quick, effective and sensitive technique used to measure the weakly deformed sedimentary rocks, and also a reliable method to reveal the deforming mechanisms of fault-related folds. In Longmenshan front belt, a typical cross-section of fault-related folds is chosen to study the AMS. A total of 224 oriented specimens have been drilled at 23 different sampling sites which were distributed at the key structural positions of this structural section developed in the Xujiahe formation of the upper Triassic. Six elementary types of magnetic fabrics are recognized and established through this AMS study: 1) a sedimentary fabric; 2) an initial deformation fabric; 3) a pencil structure fabric; 4) a weak cleavage fabric; 5) a strong cleavage fabric; 6) a stretching lineation fabric. It has been found that most of magnetic fabrics are characterized by fabrics of weak deformation which belong to the pure-shear results of a pre-folding layer parallel shortening (LPS). In the fault-bend fold, almost all magnetic fabrics are the initial deformation fabrics of weak deformation, and denote that the deformation in the forelimb is stronger than that in the backlimb and no finite strain is shown in the footwall. While in the fault-propagation fold， finite strains are concentrated in the trishear zone where magnetic fabric results are approximately consistent with the estimated consequences of the kinematic model. The tectonic stress field indicated by the magnetic fabrics is basically the same along the whole structural section and shows a NW to SE compression and shortening which is accordant with the regional compressive stress field of the Longmenshan fold-thrust belt.     

芳砜纶织物的拒水拒油整理

采用含氟拒水拒油整理剂AG-7600,交联剂三聚氰胺甲醛对芳砜纶织物进行拒水拒油整理,经过试验,得到芳砜纶织物拒水拒油整理的最优工艺条件为AG-7600整理剂质量分数为6%、三聚氰胺甲醛交联剂质量分数为2%、焙烘温度为170℃、焙烘时间为1min,整理后织物获得良好的拒水拒油性能及耐久性.     

等离子体对壳聚糖整理棉织物效果的影响

研究等离子体预处理技术对棉织物壳聚糖功能整理效果的影响.比较3种不同的整理方法.第1种是用柠檬酸及壳聚糖的混合溶液进行一浴整理;第2种是先用柠檬酸溶液再用壳聚糖溶液进行两浴处理;第3种是使用等离子体预处理织物后再经两浴法整理.使用酸性橙Ⅱ对整理后织物染色并测试K/S值.通过测试织物大肠杆菌和金黄色葡萄球菌的抗菌率考察其抗菌性.结果表明,经等离子体预处理后再经两浴法整理的织物的K/S值以及抗菌率较一浴法或两浴法都有所提高,对大肠杆菌和金黄色葡萄球菌的抗菌率高达100%.     

采用PMMA的M-Z型热光开关性能的有限元分析

应用有限元法对采用有机聚合物PMMA的M-Z型热光开关进行了分析,重点考察了器件的的功耗和速度,计算结果表明此类结构的光开关的功耗可低至3.6 mW,比硅材料的SOI热光开关的功耗低两个数量级,这对于大规模的的集成非常有利,同时开关的上升和下降时间可达到14 ms和16 ms.     

一种大容量SCP组网方案

提出了一种以交换机为信令前台的大容量SCP组网方案.该方案着重分析了前台多硬件模块组网配置、系统可靠性以及在多硬件模块配置的情况下的业务流程等问题,为SCP的大容量解决方案提供了理论参考.     

岩心磁组构分析古水流方向的原理与应用

目的针对鄂尔多斯盆地天环拗陷南段延长组开展磁组构古水流研究。方法通过测量岩心样品的磁化率各向异性,分析磁组构特征,结合矿物岩石学特征综合开展岩心古水流方向判识。结果延长组碎屑岩的古水流方向为NE—SW,NW—SE和NS向,分别代表西南、西北和北部3个方向的物质供给。结论磁组构分析古水流方向与轻重矿物组合法判断的物源方向一致,表明应用磁组构分析钻井岩心古水流方向的方法是可行、可靠的,利用磁组构分析方法恢复古水流方向,判识物源具有较好的应用前景。     

Bioscouring Knitted Cotton Fabric with an Experimental Pectate Lyase

An experimental pectate lyase enzyme was used toscour knitted cotton fabric and the emphasis was on pectinremoval. Using an enzyme dosage of 0.2 g/L at temperature55℃ and pH 6.35 for 30 rain, good scouring properties wereobtained. When appropriate concentrations of 1 - HydroxyEthylidene- 1, 1 - Diphosphonic Acid(HEDP) and CaCl2were added, the percentage pectin removal improvedsignificantly.     

Graft Modification of N,N''''-methylene- bisacrylamide onto Silk in the Presence of Air

The graft modification of N, N'-methylene-bisacrylamide (NNMBAA) onto silk using eerie ammonium sulfate, potassium persulfate, ammonium persulfate and 2, 2-azobis (isobutyronitrile) as the initiators has been studied in the presence of air. To establish reaction conditions for the graft modification of NNMBAA onto silk, the effect of different variables such as the initiator concentration, monomer concentration, acetic acid concentration, time of polymerization, reaction temperature and liquor ratio (fabric: liq.) have been studied. The optimum grafting conditions were found. As evidence of grafting, analyses of amino acid composition and alkali solubility have been carried out. Grafting caused changes in amino acid composition and alkali solubility of silk. The observation has been explained in relation to structural changes in the grafted silk.