利用积分算子方程的小波－矩量法分析频率选择反射面

小波－矩量法以小波基作为矩量法中的基函数，通过Ｇａｌｅｒｋｉｎ法可以获得很稀疏的阻抗矩阵，用迭代法求解时可减少计算机内存和计算时间。该文以有限尺寸的频率选择反射面为例，用小波－矩量法分析散射特性和电流分布，着重讨论了阻抗矩阵的稀疏化程度对计算精度的影响。结果表明，当非零元素仅为１０％时，仍能达到满意的精度，因此小波－矩量法不失为分析电大尺寸问题的一种有效方法     

价格本体系统投入产出模型中直接消耗系数对临界平均毛利率的影响分析

针对价格本体系统稳定性建立了基本价格投入产出模型,给出了定价稳定性的充要条件和临界平均毛利率的表达式,并研究降低直接消耗系数对该临界平均毛利率的定量影响,得出降低直接消耗系数可提高临界平均毛利率定量关系的结论,并给出了临界平均毛利率的增加幅度.     

水源热泵若干问题探讨

水源热泵系统在设计中与传统集中空调系统在一些问题上具有不同的处理方法,介绍了其中水源热泵系统在新风处理、蓄热技术的应用等方面的特殊方法.     

秸秆气化燃气的净化及提高燃烧热值的研究

介绍一种新型湿式净化秸秆气化燃气的方法及基本原理 ,并讨论分析了其对秸秆燃气热值的影响 .     

The Experimental and Theoretical Research of “Local Resonance“ in Ultrasonic Honing System

In 1982, Professor Fang Guoliang found the “Non full resonance“ phenomenon in a tool system while he use the thin-long tool ultrasonically machining deep-small hole. He called it as “local resonance“. Also this “Non full resonance“ phenomenon was discovered in the ultrasonic drilling and the ultrasonic honing system later. To its mechanism, professor Fang thought that the coupling of long-thin tool bar and driving system is weak, so the tool bar can vibrate independently, but the quantitative relation betwe...     

Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of “vaulted profile“, heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

一种新的计算周期表面电磁散射算法

利用数值方法研究周期表面的电磁散射问题。应用矩量法研究周期表面的电磁散射可以获得较为精确的数值结果。对于表面散射 ,应用矩量法时表面未知变量的数目非常大 ,即使对于一维表面也需要几千个未知变量 ;当求解矩阵方程时 ,计算机对求解的问题有内存和速度的限制。为了克服内存的限制 ,采用了一种新的迭代数值算法。对周期表面的电磁散射问题进行了研究 ,并与矩阵反演方法作了比较。所得结果表明 ,这种新的迭代法具有很好的收敛性。最后对散射结果进行了讨论     

附带各类约束的单一型装配线的平衡

本文着重描述了附带各种约束的单一型装配线的平衡问题,讨论了如何在Thomopoulos无约束平衡搜寻方法的基础上,实施附带各类约束的单一型装配线的平衡过程,并给出了在计算机上成功运行的实例及其分析。