强化冷却下正交切削Ti6Al4V合金的有限元分析

为正确分析切削介质的强化冷却对金属切削过程的影响，应用通用商业有限元软件Deform-2D，对航空用钛合金Ti6Al4V进行了强化冷却条件下的正交切削有限元模拟．通过几何建模、网格划分、边界条件的设定以及材料本构模型的选取等，模拟了Ti6Al4V合金锯齿状切屑的形成过程；文中还分析和探讨了不同强化冷却条件下的切屑形成、切削力以及切削温度的变化．结果表明：随着换热系数的增大，刀具前刀面的平均温度逐渐减小，而换热系数的高低对切削力及前刀面最高切削温度的变化无显著影响．     

控制碾压质量提高路面平整度

简介了压路机使用前的准备工作,从碾压温度的选择、碾压质量的控制两方面,分析了影响路面平整度的原因,就压路机工作过程中如何提高碾压质量,提出了合理化的建议。     

浅谈灌浆技术在旧水泥砼路面处治中的应用

水泥砼路面在使用过程中会产生诸多病害。通过对旧水泥砼路面板唧泥、脱空等砼路面主要病害的分析。提出采用灌浆技术来解决此类病害，并从经济的角度评价了灌浆技术的可行性。     

纵向涡强化竖直平板自然对流换热的数值模拟

利用纵向涡发生器强化换热是一种有效的无源强化方式.文中运用PHEONICS计算软件对纵向涡发生器强化竖直平板自然对流换热进行了数值模拟,模拟结果与实验结果吻合较好.在此基础上,对纵向涡发生器的几何因素及在竖直平板上的布置方式进行了模拟研究.结果表明:采取多排布置时,纵向间距d1会影响换热,当d1为35mm时平均换热系数达到一个最大值;在其它几何条件相同的情况下,错列布置方式的整体换热效果优于顺列布置的情况;对于底边为20mm的纵向涡发生器采取错列布置时,换热效果是翼高和横向间距d2两种因素的叠加,最佳翼高和横向间距分别是20和90mm.     

基于Matlab 与 C++Builder偏最小二乘分析的编程实现

针对工程测量和科研活动,根据回归性分析中较为先进的偏最小二乘法原理,以Matlab为平台,设计了实用的C Builder回归性分析程序.利用该程序,得到大米近红外光谱和其对应蛋白质含量的模型,模型预测结果和观测值的相关系数为0.993 2,模型的显著性检验F值为1.009 3.     

利用表面波测定低表面张力液体相速度的方法研究

探讨了低表面张力液体的表面波波速与波长的关系,利用该液体的单个波峰性质与圆柱透镜性质相似的特点,提出了一种新的在特定波长范围内测量该液体相速度的方法,并通过模拟计算确定了该测量方法的适用范围,同时在实验室模拟了该模型,实验结果表明在一定范围内该测量方法具有较高的精度.模拟计算结果与理论计算结果的数据拟合程度较好,最大偏差不超过5%.     

Surface modification of poly（vinyl chloride） by long-distance and direct argon RF plasma

AS AN ELECTRICALLY NEUTRAL, HIGHLY IONIZED GAS COM- POSED OF IONS, ELECTRONS, AND NEUTRAL PARTICLES, PLASMA IS A PHASE OF MATTER DISTINCT FROM SOLIDS, LIQUIDS, AND NOR- MAL GASES,KNOWN AS THE FOURTH STATE OF MATTER[1]. RECENT YEARS SEE GREAT PROGRESS IN P…     

Using of the surface plasmon resonance cytosensor for real-time and non-invasive monitoring of cellular effects in living C6 cells induced by PMA

By cell and molecular biology, the traditional life science research has been improved into modern ex-perimental science. Because cell is the basic structural and functional unit of the mysterious life, the study of life phenomena will be ultimately embodied into the study of cell biology. How to acquire a dynamic knowledge of the intricate biomolecular reactivity and process in living cells has become one of the hotspots in recent biological researches. For the complexity of cellular effects,…     

Variability of surface circulation in the South China Sea from satellite altimeter data

11-year satellite altimeter sea surface height （SSH） anomaly data from January 1993 to December 2003 are used to present the dominant spatial patterns and temporal variations of the South China Sea （SCS） surface circulation through Empirical Orthogonal Function （EOF） analysis. The first three EOF modes show the obvious seasonal variations of SSH in the SCS. EOF mode one is generally characterized by a basin-wide circulation. Mode two describes the double-cell basin scale circulation structure. The two cells were located off west of the Luzon Island and southeast of Vietnam, respectively. EOF mode three presents the mesoscale eddy structure in the western SCS, which develops into a strong cyclonic eddy rapidly from July to September. EOF mode one and mode three are also embedded with interannual signals, indicating that the SCS surface circulation variation is influenced by El Nino events prominently. The strong El Nino of 1997/98 obviously changed the SCS circulation structure. This study also shows that there existed a series of mesoscale eddies in the western SCS, and their temporal variation indicates intra-seasonal and interannual signals.     

光照曲面的外法线调整算法研究

论述了一种基于消隐算法及其数据结构的样条曲面光照处理方法。同时提出确定曲面外法线的一种行之有效的判定准则,这种判定准则根据视线与光源的关系来确定平面外法线的方向。该算法运算简单、计算量小。实验证明该算法的有效性。