立井强化冻结施工理论分析

本文以谢桥主井为例,从冻结壁强度、变形、工作面底鼓和超前位移及冻胀压力等几方面.分析了深厚表土立井强化冻结施工对防止冻结管断裂和外层井壁破坏的机理.给出了强化冻结施工适用条件.并提出了按井帮温度进行强化冻结设计的方法.     

高填方路基沉降处理及裂缝分析

分析了裂缝产生的原因，介绍了高填方路基沉降的处理方法。     

铝合金变形抗力的实验研究

采用恒应变速率凸轮式形变压缩试验机试验了四种铝合金材料的变形抗力 ,分析了应变率和应变速率对变形抗力的影响 ,结果表明随应变的增加 ,变形抗力以近似幂函数关系增加 ,在此基础上建立了简单、适用的变形抗力计算模型     

Fabrication and Application of High Quality Diamond-coated Tools

Diamond-coated tools were fabricated using Co-cemented carbide inserts as substrates by the electronically aided hot filament chemical vapor deposition (EACVD). An amount of additive in an acid solution was used to promote the Co etching of the substrate surface. The surface of the WC-Co substrate was decarburized by microwave plasma with Ar-H 2 gas. Effect of the new substrate pretreatment on the adhesion of diamond films was investigated. A boron-doped solution was brushed on the tool surface to diffuse ...     

简论郭嵩焘对西方社会政治制度的观察与思考

本文以郭嵩焘的伦敦与巴黎日记为中心,探讨了郭嵩焘对西方社会政治制度的观察与思考,指出郭嵩焘的政治文化心态的开放性、进步性。通过对中西社会政治制度的比较,郭嵩焘对封建君主专制弊端作了一定程度的揭示,并提出了改革封建政治的要求。     

一种可行的智能三维特观设计系统的设计方法

针对复杂地区地震勘探的三维观测系统设计这一困扰广大地震勘探科技人员的难题，进行了较为全面细致的分析和论述，文章从与三维地震勘探的成本和效益方面密切相关的覆盖次数问题，激发点冗余浪费问题，以及特管勘探设计与常规勘探设计的关系问题入手，进行了深入的探讨，并给出了一种解决该问题的计算机交互式实现方法，对于三维地震勘探具有指导价值。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

流线型挤出模曲面构造

根据塑料挤出的特点，在编程实现对型材截面轮廓凸凹性自动判断的基础上，采用射线法与比例间隔法相结合的方法，确定流道入口圆周上型值点的位置．以三次多项式作为流道模腔型曲线的数学模型，依据流线型要求给出的初始、边界条件，得出型曲线的数学方程．构建了挤出模流道的三维参数化曲面模型．有限元分析结果显示，该方法创建的流线型流道模型，其流动稳定性和平顺性都优于直线型流道．     

黄土滑坡形变分析预报方法研究

基于黄土滑坡的变形特征和演化规律，利用滑体总形变量与滑坡演变过程形变量之间的逼近关系，建立了一种简单，实用的滑坡预报数学模型，其效果良好，为黄土滑坡时间预报由定性分析向定量评价提供了途径。     

ICP方法匹配深度图像的实现

针对ICP(迭代最近点 )方法中寻找深度像之间点对应关系这一难点问题 ,首先介绍对ICP方法匹配深度图像的原理并给出单位四元数和旋转角度间的关系 ,然后提出一种验证两个深度图像中对应点对有效性的方法 ,给出了判断待匹配深度图像之间的点对应条件的准则 ,同时给出了实现这种准则的数据结构以及程序设计思想 .最后 ,用真实深度图像证明此方法的有效性 ,并用“主次缝合线”法合成匹配后的深度图像