Study on the Predicting System of Breaking Chip When PCD Tool Cutting Aluminum Alloy

In the field of automobile manufacture, during the aluminum alloy cutting, chip forming and breaking process are very complicated. It is affected by many facto rs. Automatic machining process can not be carried through if the chip enlaces t he workpiece or the tool. So the chip control and breaking are key technology. P CD tool has many traits, such as high cutting efficiency, machining precision an d wearability. It is desired that it be used for machining coloured metals.The p aper present the study of p...     

价格本体系统投入产出模型中直接消耗系数对临界平均毛利率的影响分析

针对价格本体系统稳定性建立了基本价格投入产出模型,给出了定价稳定性的充要条件和临界平均毛利率的表达式,并研究降低直接消耗系数对该临界平均毛利率的定量影响,得出降低直接消耗系数可提高临界平均毛利率定量关系的结论,并给出了临界平均毛利率的增加幅度.     

沉降比在活性污泥法处理污水中的作用

通过分析沉降变化规律与其他有关参数之间的对应关系，旨在掌握和控制活性污泥法工艺处理污水的工艺运行情况，使处理后水质稳定达标。     

试论饭店员工忠诚度管理

人力资源供过于求,人才资源供不应求,这是当今饭店业人力资源的现状.对员工进行忠诚度管理,培养与维系员工的忠诚感,建立一支与饭店共发展的员工队伍,留住优秀人才,已成为饭店业人力资源管理的重要内容.     

Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of “vaulted profile“, heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

一种新的计算周期表面电磁散射算法

利用数值方法研究周期表面的电磁散射问题。应用矩量法研究周期表面的电磁散射可以获得较为精确的数值结果。对于表面散射 ,应用矩量法时表面未知变量的数目非常大 ,即使对于一维表面也需要几千个未知变量 ;当求解矩阵方程时 ,计算机对求解的问题有内存和速度的限制。为了克服内存的限制 ,采用了一种新的迭代数值算法。对周期表面的电磁散射问题进行了研究 ,并与矩阵反演方法作了比较。所得结果表明 ,这种新的迭代法具有很好的收敛性。最后对散射结果进行了讨论     

外部收益率讨论

着重讨论了外部收益率在投资方案中的选择和比较问题，证实了外部收益率的实用性。     

器件表面保护用有机硅漆导电机理的探讨

通过测量不同固化条件下高压硅器件用有机保护材料聚酯改性硅有机漆SP的电阻率随温度变化的规律,并借助于对经各种条件固化后SP的热重、差热分析、红外光谱分析,研讨了它的高温导电机理.实验结果表明,在一定的固化条件下,固化后的材料在高温时具有最高的电阻率,材料中离子输运最弱,并具有较佳微观结构,这时材料的固化温度是210℃.提出了SP的高温电导主要是含羟基的分子产生的本征离子电导的新观点,建立了SP的高温导电模型,并对电性能测量结果作出了新的解释.     

缩合型硅橡胶与金属的粘接研究

在以南大α系列硅烷偶联剂为基础的交联增粘体系中,引入某些γ系列硅烷偶联剂及增粘助剂,制成单组分室温硫化型粘合剂,并测定了其与铝、铜及不锈钢的粘接性能关系.研究表明:在既定的体系中加入KH-550、KH-792、WD-30以及KH-550与KH570的反应物可有效提高粘合剂对铝合金、黄铜及不锈钢的内聚破坏率,而且KH-550、KH-792还有助于改善粘合剂的贮存稳定性.