信号、噪声通过线性工作系统设备过程中信噪比的变化

本文就信号、噪声通过线性工作系统设备过程中信噪比变化的问题，提出一个简单和实用的模型，建立相应的计算公式，并在视频领域和音频领域对公式展开讨论，进一步阐述公式的实用性，可作为工作系统的设计和调整的参考，以祈获得更好的社会效益和经济效益．     

分散控制系统稳定化的新方法

本文从实际考虑提出了一种使分散控制系统稳定的新方法。这是一种最优的稳定方法。它不仅使反馈控制器的结构具有站间的通讯费用最低的特点，而且也使控制结构有最少的通道数。数值计算的例子表明了本文所提方法的正确性和可操作性。     

Modeling and Control of Active Suspensions for MDOF Vehicle

The conventional method for analyzing active suspension control for a vehicle is only to analyze a quarter or half car with a lower order degree-of-freedom (DOF) model, but such models do not actually model practical applications. Accurate models of a suspension control system require a multi-degree-of-freedom (MDOF) vehicle model with a detailed model of the controller. An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ control method. The control system performance has been investigated by comparing the H∞controller with a linear quadratic (LQ) controller.     

加速度观测器设计与仿真

介绍了利用状态反馈综合带加速度反馈的最优控制系统，利用系统所检测的位置量和速度量设计了加速度观测器，并对综合的最优控制系统进行仿真，包括系统幅频、相频特性及状态估计值与真实状态之间的误差，最后给出了有、无加速度观测器反馈时系统跟踪晃动误差曲线。带加速度观测器反馈系统使晃动误差减小84％，滤除噪声的效果也比较好。     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

Simulation and Experimental Analysis of Super High-Speed Grinding of Ductile Material

This study aims to reduce the work-affected layer of the machined surface by carrying out the grinding at the speed over static pr o pagation speed of plastic wave of ductile materials and also aims to clarify suc h super high-speed machining mechanism.This paper reports on the result obtain ed through the molecular dynamics simulations and experiments on the super-spee d grinding below and beyond static propagation speed of aluminum.From the simul ation results,it is verified that the plastic deformation ...     

中国股票市场分割(1991～2000)的理论探讨

与世界其他国家的证券市场相比,中国证券市场是一个高度分割的市场,这首先表现在它被划分成为A、B和H股三个市场,这三个市场不仅计价货币、交易机制和募集方式不同,而且各自允许开放的投资者对象也严格限定、互不开放。由此,这三个市场的股票价格彼此差别较大。重点考察了中国大陆的股票市场分割,其重要体现是中国B股市场普遍存在着严重的折价问题,在B股市场向国内持有外币的投资者开放之前,大多数上市公司B股价格不仅远低于其A股价格,有的还曾跌破发行价、资产净值和面值,这使得我国B股市场已经成为世界证券市场平均市盈率最低的市场,其平均市盈率只有11倍,这不仅大大低于A股市场平均市盈率(大于50倍),也低于国际股市的平均市盈率(15～20倍)。认为,资本控制,即投资限制、B股相对于A股的信息不对称和对人民币汇率的预期是形成B股折价的主要因素。     

一类混沌系统的自适应模糊控制器设计

通过混沌系统的形式的抽象，提出了一种间接自适应模糊控制方法来控制一类具有未知非线性函数的混沌系统跟踪一参考轨迹．     

二十八天水泥抗压强度动态模型及参数对预测的影响

本文用时间序列分析方法分析水泥生产过程,笔者假设水泥生产过程为一个平稳的随机过程,它的二十八天抗压强度为具有控制项的自回归模型。用30组数据建立了28天水泥抗压强度动态模型,并做了跟踪,分析了七天抗压强度、细度、SO_3等与二十八天抗压强度的关系。最后,把生产中实际值和预测值进行了比较。     

二阶系统性能参数的研究

系统地总结了二阶系统动力学方程、传递函数、状态方程、时间响应及各种性能指标，并对其进行了详细的讨论，同时揭示了各种方法之间的内在联系及应用中注意的问题。