球形和楔形光纤探针耦合特性实

采用实验方法测量了球形光纤与楔形光纤的耦合效率,得出耦合效率随楔形光纤的楔角及球形光纤弓形高变化曲线.通过实验可得,楔形与球形光纤的耦合效率随楔角增加而增大,当楔角由20.6°增大到30.3°以及楔角由40.6°增大到55.2°时,耦合效率曲线呈较快速上升趋势,由30.3°增大到40.6°以及楔角由55.2°增大到76.5°时,耦合效率曲线上升趋势较缓;随着球形光纤弓形高的增加,球形与楔形光纤的耦合效率基本上线性上升;耦合效率随着楔形与球形光纤的间距的减小而增大,当间距由0.09mm减小到0.05mm时,耦合效率曲线呈较快速上升趋势,由0.04mm减小到0.01mm时,耦合效率曲线呈下降趋势.     

Measurement of creep of optical fiber by a low coherent white light double interferometer system

The creep properties of optical fiber used in fiber optical sensors were studied in this paper.A low coherent white light double interferometer system was designed and calibrated and the creep deformations of optical fibers under static and cyclic loadings were measured with this device.The research results showed that polymer coated optical fibers crept at the beginning when they were under static or cyclic load.As the number of the cyclic loading or the static loading times increased the creep tended to s...     

High Oil-absorptive Composites Prepared from Non-woven Fiber and Sponges with 4-tert- butylstyrene-EPDM-divinylbenzene Graft Polymer

4-tert-butylstyrene-EPDM-divinylbenzene graft terpolym-er (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and sol-PBED were isolated from extraction of tetrahydrofuran (THF), and then they were identified by IR spectr-oscopy. The maximum oil-absorptivity of gel-PBED produced from the optimum reaction conditions was 8420% but its swelling rate was very low. The highest oil-absorptivity of photocrosslinked sol-PBED film was 5 800%. Although its oil absorbency was not as high as gel-PBED' s, swelling rate was higher than that of gel-PBED and was suitable for commercial purpose. After swelling in oil, neither gel-PBED nor photocrosslinked sol-PBED film having high oil-absorptivity had sufficient mechanical strength to be taken out of oil wholly. As is known, composite technique is one of the useful methods for reinforcing them. Fibers, sponges and non-woven cloths were used as reinforcers or supporters in this work. Oil-absorptivities and swelling kinetics     

Adhesion of PBO Fiber in Epoxy Composites

The high mechanical and thermal performance of poly p-phenylene- 2, 6-benzobisoxazole ( PBO ) fiber provides great potential applications as reinforcement fibers for composites. A composite of PBO fiber and epoxy resin has excellent electrical insulation properties, therefore, it is considered to be the best choice for the reinforcement in high magnetic field coils for pulsed magnetic fields up to 100 T.However, poor adhesion between PBO fiber and matrix is found because of the chemically inactive and/or relatively smooth surface of the reinforcement fiber preventing efficient chemical bonding in the interface, which is a challenging issue to improve mechanical properties. Here, we report the surface modification of PBO fibers by ultraviolet (UV)irradiation, O2 and NH3 plasma, as well as acidic treatments. The interfacial adhesion strength values of all the treatments show the similar level as determined for aramid fibers by pull-out tests, a significant impact on fibermatrix-adhesion was not achieved. The surface free energy and roughness are increased for both sized and extracted fibers after plasma treatments together with maleic anhydride grafting. The sized fiber shows marginal improvement in adhesion strength and no change in fiber tensile strength because of the barrier effect of the finish.For the extracted fiber, different surface treatments either show no apparent effect or cause reduction in adhesion strength. Atomic force microscopy (AFM) topography analysis of the fracture surfaces proved adhesive failure at the fiber surface. The fiber surface roughness is increased and more surface flaws are induced, which could result in coarse interface structures when the treated fiber surface has no adequate wetting and functional groups. The adhesion failure is further confirmed by similar adhesion strength and compression shear strength values when the fiber was embedded in various epoxy resins with different temperature behavior. The tensile strength of fiber is sensitive to surface treatment conditions as revealed by a bimodal Weibull statistical distribution analysis. Considerable strength reduction occurred, particularly for cases of acidic and plasma treatments, while UV irradiation shows the better ability to retain fiber strength.     

芳香族聚酯的相转移催化合成及其介晶态行为的研究——Ⅰ.聚酯的合成及介晶态行为

本文用相转移催化方法合成了四种新颖的芳香族聚酯。对所得聚合物进行了红外光谱、热重分析、偏光显微镜、示差扫描量热仪和解偏振光强等测试,以研究它们的结构和性能。它们的热分解温度都在330℃以上。其中的聚对,对′-1,4,7-三氧杂庚撐基二苯甲酸对苯二酚酯和聚对苯二甲酸对,对′-1,8-二氧杂辛撐基二苯酚酯,呈现向列型相转变,它们的清晰点分别为237℃和327℃。其它两种含双酚A或酚酞基团的聚酯则不存在液晶行为。对实验结果进行了讨论。     

非本征光纤F—P传感器制作工艺

分析非本征光纤F-P传感器制作工艺上存在的问题,对传感器工艺制作进行了研究,设计了半自动光纤F-P腔调节工作台,利用光纤五维调节架对光纤进行插入和对准,提高了光纤F-P传感器制作的速度和质量。     

High Oil-absorptive Composites Prepared from Non-woven Fiber and Sponges with 4-tert- buty1styrene-EPDM-divinylbenzene Graft Polymer

4-tert-butylstyrene-EPDM-divinylbenzene graft terpolymer (PBED) was prepared by graft cross-polymerization in toluene using BPO as an initiator. The gel-PBED and solPBED were isolated from extraction of tetrahydrofuran (THF), and then they were identified by IR spectroscopy. The maximum oil-absorptivity of gel-PBED produced from the optinum reaction conditions was 8 420% but its swelling rate was very low. The highest oil-absorptivity of photocrosslinked sol-PBED film was 5 800%. Although its oil absorbency was not as high as gel-PBED' s, swelling rate was higher than that of gelPBED and was suitable for commercial purpose. After swelling in oil, neither gel PBED nor photocrosslinked sol-PBED film having high oil-absorptivity had sufficient mechanical strength to be taken out of oil wholly. As is known, composite technique is one of the useful methods for reinforcing them. Fibers, sponges and non-woven cloths were used as reinforcers or supporters in this work. Oil-absorptivities and swelling kinetics were evaluated by method ASTM (F726 - 81 ) and an experimental equation. The mechanical properties and the morphologies of some composites were measured by tensile tester and SEM , respectively.     

CFRP筋预应力锚具受力性能试验

设计一套圆弧槽夹板式锚具,通过拉拔试验研究锚具的夹持性能,并研究包括施加于夹板紧固件螺栓上的总扭矩值和扭矩沿夹具纵向分布等主要参数对锚具性能的影响.结果表明,总扭矩值和扭矩分布均对锚具的性能有明显影响.当施加在夹板紧固件螺栓的总扭矩值小于200 N·m,试件最终将发生滑移破坏;当总扭矩值超过200 N·m,试件最终发生...     

“乐歌运动”对中国近现代音乐发展的影响

“乐歌运动”是中国近代音乐史上一次具有深远意义的文化现象．对中国近现代音乐的发展有着深远的影响。它影响到了中国近现代的音乐教育，使其走上了接轨西方的专业音乐教育的道路。为中国的专业音乐创作打下良好基础。它所带来的一些西方音乐的形式与体裁及西方乐理和音乐知识都给中国音乐注入了新的血液。在这种冲击与影响下中国传统音乐的主导地住不断下降。此时，中国近现化的音乐家们。在不断的探索与实践中走出了一条具有中国特色的“新音乐”之路。     

FRP 复合材料及其在工程中应用(英文)

介绍了纤维增强复合材料在北美、欧洲及日本等地的工程应用情况．为便于深入了解，首先回顾有关复合材料的基本特性．详细给出复合材料结构件及其在桥梁、建筑、基础设施、管道、桩柱、桅杆、海洋结构等方面的应用，并指出为什么这些应用中会采用复合材料以及工程结构采用复合材料的利弊得失．