金属间化合物(Mg,Zn)_(12)Ce与(Mg,Zn)_(11)Ce的研究

对300℃时Mg-Zn-Ce系富镁侧化合物的成分特征、结构和相平衡关系进行了研究.结果表明,Mg-Zn-Ce富镁角存在一个Mg12Ce的二元置换固溶体(Mg,Zn)12Ce,还存在一个三元线性化合物(Mg,Zn)11Ce(τ相).(Mg,Zn)12Ce中Zn的范围为0~7.3%(原子分数),其晶体结构为体心四方晶格.三元线性化合物τ相含Zn为8.5%~43.5%(原子分数),其晶体结构为C底心正交晶格.(Mg,Zn)12Ce和τ相均与α(Mg)存在稳定的两相平衡,且在Mg-Zn-Ce系富镁角还存在三相平衡Mg+(Mg,Zn)12Ce+τ.     

45钢固体粉末法稀土、硼、铬、铝共渗工艺研究

研究了RE_Mg合金对固体粉末法硼、铬、铝共渗层成分、组织和性能的影响 .发现随着RE_Mg合金加入量的增加 ,渗层中Al2 O3的量不断增多 ,当RE_Mg合金加入量为 5 %时 ,渗层中出现连续致密分布的Al2 O3黑区组织 ,对此进行了性能测试和机理探讨     

仿真模型中复杂三维实体集的选择与交互技术研究

鉴于目前商用图形软件包对于复杂模型中三维实体集显示与选择的局限性，本文提出了一种新的判断点与面域从属关系的方法，此方法借鉴计算机图形学中扫描转换填充算法的射线法，并在此基础上对射线法进行扩充和完善，文章同时对三维复杂实体群的交互手段和技术进行了研究，在解决实际问题中取得了良好的效果。     

Research on Digital Models for Product Design and Manufacture

CAD/CAM integrate technology has been drawn to much a ttention and becomes one of the focus of the international academic and commerci al research, Through efforts nearly 10 years, remarkable progress has been made in the 3-dimension feature parametric modeling. UG, SOLIDWORK and MDT apply the se technology with respective features. However, no distinct development has bee n made in the digital models from geometric feature to manufacture feature. Prod uct information expression and the basic model frame ...     

The Extraction Method of Cutting Engagement in Ball-end Milling Simulation

Ball-end mill is widely used in workpiece processi ng with free-form surfaces. Such models that can predict processing character istics precisely are very necessary to the aim of cost reducing, quality improvi ng and productivity progressing, the cutting force prediction is the most import ant among these models. To explore the physical essence of metal cutting, model researchers commonly simplify the geometric conditions in cutting process, and a ssume that the geometric parameters that are needed to s...     

Ruin Probability with Variable Premium Rate and Disturbed by Diffusion in a Markovian Environment

We consider a risk model with a premium rate which varies with the level of free reserves. In this model, the occurrence of claims is described by a Cox process with Markov intensity process, and the influence of stochastic factors is considered by adding a diffusion process. The integro-differential equation for the ruin probability is derived by a infinitesimal method.     

Pb-Sn-Bi三元系α相固溶体的点阵参数

应用X射线衍射法测定了Pb-Sn-Bi三元系Pb基α相固溶体的点阵参数,发现点阵间距与成分呈线性变化,对两批实验数据分别进行回归分析,得到点阵参数-浓度关系的统一解析式: α=0.49495X_(Pb)+0.47813X_(Sn)+0.50629X_(Bi)。其F检验置信度大于99.9％,残余标准差σ=6.4×10~(-5) nm,分析点阵畸变的影响因素表明尺寸效应是控制固溶体点阵行为的主要因素。     

MeV Pb离子在非晶Si中的射程离散──离子束混合和增强扩散的影响

１．０ＭｅＶ２０８Ｐｂ离子在非晶Ｓｉ中的投影射程ＲＰ和射程偏差ΔＲＰ作为注量和温度二者的函数用背散射法进行测定．注量的变化范围为５×１０１３～７×１０１４ｃｍ－２．注入是在室温和ｔ＝－１２０℃下完成的．由由实验所确定的投影射程，射程偏差与注量或温度无关，并且分别等于２９５和７２．２ｎｍ．与ＴＲＩＭ８６的计算结果相比较，发现ＲＰ的偏离为１８％，而ΔＲＰ的偏离为３６％．ＲＰ和ΔＲＰ二者与注量及温度的无关性，排除了所观察到的与ＴＲＩＭ的矛盾是由于注入期间辐射增强扩散或离子束混合效应而引起的解释。     

激光开槽、埋槽电极硅太阳电池

报道一种新颖的激光开槽、埋槽电极硅太阳电池的结构、工艺流程及其研制结果。在ＡＭ１．５，２５℃，１００ｍＷ／ｃｍ２的条件下，以面积为４５ｃｍ３的３６片硅片研制的硅太阳电池的输出参数的平均值为ＪＳＣ＝３６．１ｍＡ／ｃｍ２，Ｖ∞＝６３３ｍＶ，Ｆ．Ｆ．＝０．７９８，η＝１８．２３％，最后分析了种高性能硅太阳电池的设计特点。