翼盒尺寸优化中的刚度约束法

翼盒为机翼主要承力部件,优化潜力较大,是机翼结构优化设计的重点对象。在翼盒结构尺寸优化设计阶段,考虑到计算效率和技术成熟度等因素,往往只重点考虑静强度和总体变形约束。优化结果存在不满足颤振和局部刚度要求的风险。基于刚度指标,通过HyperWorks脚本二次开发,建立了关联结构参数的机翼剖面刚度响应。实现了机翼结构尺寸优化设计中各站位处的刚度约束,为如何在机翼结构优化设计中考虑颤振刚度约束提供了新的方法。     

PCS颗粒测量技术中不同粒径颗粒的相互影响

在光子相关光谱(photon correlation spectroscopy，简称PCS)颗粒测量技术中，由于不同粒径颗粒的散射光强分布差异巨大，导致在多分散颗粒系中，进行颗粒粒度分布(particle size distribution，简称PSD)测量时，某些占有足够多数量的颗粒，由于其散射光强度相对微弱而被忽视，从而影响粒度分布的计算结果．     

A review of tactical planning models

The aim of this paper is to give an overview on models and methods used to solve tactical planning problems. The modeling and the elaboration of the well-know tactical planning problems （master planning ＆ scheduling, material requirement planning and multi-site planning） are discussed. These problems are modeled from two ＂lot sizing＂ models called the Capacitated Lot Sizing Problem （CLSP） and Multi Level Capacitated Lot Sizing Problem （MLCLSP）. From both models, a lot of extensions has been proposed in the literature. The purpose of this paper is twofold： first, classifications of the CLSP and MLCLSP as well as their extensions are given. For each model, the major scientific contributions are mentioned. These classifications made from seventy papers give an overview of ＂lot sizing＂ models dedicated to the MPS, MRP and Multi-site and show the diversity of models. Second, from a classification, an analysis of methods used for each model is given. The instance size, best gap and reference for gap computation are given for each contribution, This work can be used to elaborate an optimization tool for tactical planning problematic such as Advanced Planning System.     

多资源约束的GTLS问题的遗传算法

成组单元环境下的生产批量计划问题成组批量计划问题（ＧＴＬＳ）对带有多能力约束的ＧＴＬＳ构造了遗传算法和线性规划混合算法进行求解，能够获得问题的近优解，仿真和计算结果表明了算法的有效性。     

STUDY ON THE SYNTHESIS AND APPLICATION OF SELFFIXED SIZING AGENT

INTRODUCTIONThe conversion from acid to neutral papermaking will bring about great economic and environmental benefit. A new kind of neutral sizing agent with fine quality and low price can accelerate the conversation.WSF-Sizing Agent is a new kind of waterproof agent especially for paper tableware. It is a high polymer waterproof material coming from the polymerization of methyl methacrylate, propenyl nitrile and cation monomer. The uses of technology focus on the emulsion polymerizati…     

新的Lagrangian松弛法求解CLSP问题

ＣＬＳＰ是在受能力约束限制下,确定Ｎ种不同的项目在给定的计划范围Ｔ内的第一时间段批量,使得在整个计划范围内项目总的调整费用和库存保管费用以及生产费用之和最小。     

天然彩色棉上浆问题的研究

天然彩色棉加工要注意清洁生产,保证生态环保特性,必须慎重选择工艺.FZ-1磷酸酯变性淀粉的粘附性能好,粘度稳定,浆膜光滑完整,浆液渗透好.实验证明:采用FZ-1磷酸酯变性淀粉对天然彩色棉纱上浆,浆纱易分绞,毛羽贴伏率高,浆纱弹性大幅度改善;织机开口清晰,织机效率显著提高;煮浆耗汽量小,浆纱成本较低.     

PLA纤维纱线浆纱工艺研究

针对PLA纤维纱线的特点,选用马铃薯变性淀粉K5为主浆料,PVA、聚丙烯酸为辅,蜡片为助剂,制定了3种经纱上浆配方,对其浆液性能、浆膜性能和浆纱性能及其他指标进行测试。对比分析,得出了PLA纤维纱线上浆的最佳工艺路线。用马铃薯变性淀粉K5替代PVA ,既满足了PL A纤维纱线上浆要求,也减少了环境污染。     

对动态光散射颗粒测量技术中几个问题的讨论

在分析国内外动态光散射颗粒测量技术研究动态的基础上，对在动态光散射颗粒测量技术中应用的新理论和新方法，通过增加自相关函数的拟合参数来克服热晕效应的影响，用单束光互相关方法提高信息的时间分辨率及测量浓悬浮颗粒时的改进装置等几个问题进行了讨论。