Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

T BM 在吉林中部城市引松供水施工中的应用

以敞开式TBM 为主介绍了常见的TBM类型及发展现状，结合吉林中部城市引松供水项目论述了不良地质因素，如软弱围岩变形、隧洞突涌水、岩爆、塌方对敞开式 TBM 掘进的影响，重点论述了针对不同因素采取的处理措施和操作方法。     

预应力加载条件下零件干磨削表面强化层特征

采用预应力复合干磨削加工技术,对未调质45#钢试件在不同预应力加载条件下实施表面磨削淬硬,观测不同磨削深度和进给速度条件下的试件表层金相组织,测量并分析试件在不同预应力条件下磨削淬硬层厚度、金相组织的变化状况,并通过试件截面不同位置硬度测定显示淬硬层厚度及金相成分的变化,得到试件施加预应力对淬硬强化层厚度的影响规律.研究表明,预应力淬硬磨削能使工件表面产生强化层,且大的磨削深度和小的进给速度有利于试件表面发生相变强化以及表层塑性变形的增大.     

基于三导向条结构的枪钻深孔加工动力学分析及圆度误差优化

为了改善深孔加工的圆度形貌,依据枪钻深孔结构与加工中的实际受力情况,结合导向块对提高孔加工圆度形貌所起到的作用,设计出具有三个导向块的优化结构。在保证计算精度的前提下,通过有限元分析法及力学模型的特征矩阵推算出深孔加工过程中出现圆度误差的数学表达,并通过数值仿真分析与实验研究,对比分析了两导向块结构和三导向块结构枪钻在相同的加工条件下圆度误差形成的情况。计算结果表明,三导向块结构的枪钻加工孔的圆度误差更小。可见,三导向块结构可以有效降低圆度形貌变形的出现,提高加工质量。     

A survey of occlusion detection method for visual object

Occlusion problem is one of the challenging issues in vision field for a long time , and the occlu-sion phenomenon of visual object will be involved in many vision research fields .Once the occlusion occurs in a visual system , it will affect the effects of object recognition , tracking, observation and operation , so detecting occlusion autonomously should be one of the abilities for an intelligent vision system .The research on occlusion detection method for visual object has increasingly attracted atten-tions of scholars .First, the definition and classification of the occlusion problem are presented . Then, the characteristics and deficiencies of the occlusion detection methods based on the intensity image and the depth image are analyzed respectively , and the existing occlusion detection methods are compared.Finally, the problems of existing occlusion detection methods and possible research directions are pointed out .     

论窜烧机油故障的诊断与排除:以柳工装载机WD61567G3-36发动机为例

主要介绍一台柳工侧卸装载机发动机大修镶新丝套后,出现了窜油故障,但检测有关部件的密封配合,以及用量缸表测量气缸体圆度、圆柱度偏差,均符合技术要求。后经拆检分析发现,窜烧故障是由气缸体承孔加工精度低与外径配合不良引起。     

孔距、排距对高台阶抛掷爆破抛掷率的影响

为了研究高台阶抛掷爆破中是否也存在最优的间、排距,在黑岱沟露天煤矿进行了大量现场试验,试验结果表明:在黑岱沟露天矿高台阶抛掷爆破中,排距不变,孔距增大.爆堆的前沿抛距基本不变,抛掷率随着炮孔密集系数的增大而增大.当m>1.6时,抛掷率开始下降.与孔距相比,排距变化对抛距的影响程度要大一些.在高台阶抛掷爆破中确实存在有利于抛掷的最佳间、排距,只是因为试验的台阶高度、单耗等参数的不同,最佳m值存在差别.在黑岱沟露天矿特定的试验条件下可以认为,当1.45相似文献   

深基坑出碴方案比选

深基坑出碴在一些情况下会成为制约工期的关键因素,尤其是复杂地形条件下,在首先满足工期的前提下,还要综合考虑现有机械情况、技术条件和经济效益以及其他作业干扰,这使得深基坑出碴变得更加复杂。文章通过准朔铁路黄河特大桥工程特点,对几种深基坑出碴方案进行了分析对比,综合考虑后选择了履带吊出碴方案。     

时变流动性深度模型

使用超高频数据,并利用流动性深度指标,研究流动性的动态特征、影响因素以及检验市场微观结构理论.结果支持基于信息不对称下的市场微观结构理论.研究还表明耐心交易可以降低交易成本.     

Terrestrial isopods and myriapods in a forested scree slope: subterranean biodiversity,depth gradient and annual dynamics

Diversity, depth distribution and seasonal activity of isopods and myriapods were studied using subterranean traps buried in a forested limestone scree slope in the ?ierna Hora Mts, Western Carpathians, Slovakia, throughout the depth gradient from 5 to 95 cm. A total of five isopod, 13 diplopod and 11 chilopod species were identified. Most edaphic species strongly preferred the uppermost organic soil layers. Among the species captured, some represented rare stenoecous Carpathian endemics, namely the isopod Trichoniscus carpaticus, and diplopods Julus curvicornis and Leptoiulus mariae. Others were subterranean forms, partly adapted to hypogean conditions: the isopod Mesoniscus graniger, and diplopods Mecogonopodium carpathicum and Trachysphaera costata. The annual activity in the vast majority of the species ceased completely in winter, and was gradually relaunched in spring. In evaluating the age structure of two predominant diplopods Polydesmus denticulatus and Mecogonopodium carpathicum, both widespread across the depth gradient, a vertical segregation of early post-embryonic stages was found. While P. denticulatus tended to undergo the early stages of development in the soil-filled topmost levels, the early juvenile stage of M. carpathicum was distributed deep in the scree slope profile.