废旧橡胶粉改性沥青感温性的评价

采用高剪切工艺,备了三种废旧橡胶粉改性沥青;利用针入度指数法评价了改性沥青的感温性,采用当量软化点、当量脆点、4℃延度评价了改性沥青的高温稳定性和低温稳定性。结果表明,改性沥青的感温性得到很大程度的改善,当量软化点提高约7℃,当量脆点降低（8-10）℃,4℃延度提高20cm,说明废旧橡胶粉对沥青的感温性改性效果显著。     

橡胶支座水平剪切弹塑性力学性能试验研究

通过对铅芯橡胶支座剪切弹塑性力学性能试验,发现铅芯橡胶支座的滞回曲线与加载时程密切相关,在同一水平应变下,水平剪切刚度随加载次数的增多有所减小,最后趋于稳定;在不同应变下,水平剪切刚度随应变的增大而减小.试验还表明铅芯橡胶支座不仅在大应变存在着小应变滞回特性,而且在小应变也存在着小应变滞回特性.     

智能高速频率计设计

论述了一种频率测量范围为1 Hz4 GHz高分辨率频率计的设计方法.智能高速频率计数器分成两个通道,利用ECL逻辑电平高速芯片和CPLD共同完成对高频信号的整形和计数,采用单片机进行智能控制和显示,具有多时基档位转换、频率测量、周期测量、自动校准、外部计数等多种功能.     

Research on reconfigurable collaborative remote diagnosis system

The function-layer model and working model of collaborative remote fault diagnosis system （FDS）, which includes three layers： task layer, collaboration layer and diagnosing layer, are proposed. The running mechanism of the system is discussed. A collaborative FDS may consist of several subsystems running at different places and the subsystem consists of several fimction modules. A structure centered on data-bus is adopted in subsystem. All the function modules in subsystem are encapsulated into software intelligent chips （SICs） and SIC can but connect with data-bus. So, it is feasible to reuse these diagnosis fimction modules and the structure of subsystem in different diagnosis applications. With the reconfigurable SICs, several different function modules can reconstruct quickly some different diagnosis subsystems in different combinations, and some subsystems can also reconfigure a specified collaborative FDS.     

数字电视条件接收系统的加扰算法芯片设计

简要介绍了DVB数字视频广播条件接收系统中通用加扰算法的原理。基于Altera公司StratixⅡ系列的FPGA,底层各模块采用硬件描述语言(Verilog HDL)进行描述,顶层采用原理图设计的方式,设计出采用DVB通用加扰算法的加扰器。利用Quar-tus Ⅱ7.2进行编译、仿真,从对编译及各模块的仿真结果分析,块加密模块与流加密模块的最高时钟频率分别达到229.89MHz与331.27MHz,达到了设计要求。最后在FPGA上测试表明:本设计可以应用于实际TS流的加扰。     

基于微流控液滴技术的载药缓释微球研究进展

单分散性载药缓释微球作为新型药物释放系统已成为缓释药物制剂研究的热点问题之一,但传统制备方法获得的载药微球大多存在大小不均一、粒径分布宽、载药量低、缓释效果不明显等问题,极大地限制了其应用。微流控液滴技术因其操作简单,可以控制液滴形成的过程,成为近年发展起来的制备单分散性载药微球的新方法,在制备粒径均匀、具有特殊性能等载药微球方面有极大的优势。本文从传统载药微球的制备及存在问题入手,简述微流控技术的基本原理及液滴微流控制备载药微球的基本方法与类型,体现微流控技术相比传统制备技术的优势,即可以制备得到粒径均一、大小组分可控且呈单分散性的药物可控释放微球。     

废橡胶胶粉利用现状及发展趋势

简述了废橡胶利用现状,指出废橡胶利用胶粉化是发展趋势,描述了我国废橡胶胶粉利用现状,分析了其未来科研和生产动态,以便和该领域同行的讨论交流。     

基于语音的微机控制报警器

提出了以8031单片微机和ISD2590语音芯片为核心的微机控制报警器的设计方法，介绍了ISD2590的特点和使用方法，阐述了系统的硬件设计和软件设计。     

A New Implementation of the Post-Stage Tasks of Motion Estimation Using SIMD Architecture

IntroductionThe MPEG2 [1] video compression standard is oneof the key technologies for applications such asdigital broadcasting,storage media,etc.Recently,some single chip video encoders havebeen developed for the MPEG2 standard. Thedevelopment of hardware architecture suitable forsystem integration is the key to single chipimplementation.Motion estimation/compensation is the keypart of a single MPEG2 video encoder chip. It hasa great impact on the chip size,the powerdissipation,and the …     

Optimal design of label-free silicon“ lab on a chip” biosensors

This paper reported the optimal design of label-free silicon on insulator(SOI) "lab on a chip"biosensors.These devices are designed on the basis of the evanescent field detection principles and interferometer technologies.The well-established silicon device process technology can be applied to fabricate and test these biosensor devices.In addition,these devices can be monolithically integrated with CMOS electronics and microfuidics.For these biosensor devices,multi-mode interferometer(MMI) was employed to combine many stand-alone biosensors to form chip-level biosensor arrays,which enable realtime and label-free monitoring and parallel detection of various analytes in multiple test samples.This sensing and detection technology features the highest detection sensitivity,which can detect analytes at extremely low concentrations instantaneously.This research can lead to innovative commercial development of the new generation of high sensitivity biosensors for a wide range of applications in many fields,such as environmental monitoring,food security control,medical and biological applications.