酸碱改性粉煤灰对SBR反应器处理氨氮废水的影响

利用1mol/L 盐酸和1mol/L NaOH溶液对粉煤灰进行酸碱改性,将改性前后的粉煤灰加入处理模拟氨氮废水的SBR反应器中,反应器菌源来自于污水处理厂生化池活性污泥,逐渐提高进水NH⁺₄-N质量浓度,检测反应器NH⁺₄-N质量浓度及反应器中污泥质量浓度、优势菌群丰度.实验结果表明,当反应器运行40d,进水NH⁺₄-N质量浓度为861.1mg/L时,R3(添加经酸碱改性粉煤灰)反应器、R2(添加未改性粉煤灰)反应器、R1(未添加粉煤灰)反应器NH⁺₄-N去除率分别为100%,98.76%,91.87%;利用蛋白质质量浓度间接表征三个反应器中的污泥质量浓度,R3反应器中蛋白质质量浓度最高为829.08mg/L,R2次之为789.37mg/L,R1最小为154.2mg/L.此外,高通量测序结果显示R3反应器中硝化菌和亚硝化菌群丰度均高于R1,R2反应器中菌群丰度.     

高剪切反应器中有机相强化KHCO3/K2CO3溶液吸收CO2研究

在高剪切反应器（HSR）中研究了不同有机分散相对KHCO₃/K₂CO₃溶液吸收CO₂的强化效果，并考察了有机相与有机胺溶液复配使用对CO₂吸收率的影响。实验结果表明：环己烷、正庚烷对KHCO₃/K₂CO₃溶液吸收CO₂的强化效果明显，甲苯、正辛醇对KHCO₃/K₂CO₃溶液吸收CO₂则没有明显的强化效果；CO₂吸收率随HSR转速的增加而增加，随气液比、温度的增加而降低；环己烷对加入二乙醇胺活化的K₂CO₃溶液有较为明显的强化作用，CO₂吸收率最高可提高23%。与文献中不同反应器的对比表明HSR对CO₂具有较高的吸收效率。     

定-转子反应器在水脱氧工艺中的应用研究

在定-转子反应器中采用N₂-水脱氧、CO₂-水脱氧两个体系脱除水中的溶氧，考察了转子转速、液体体积流量以及气体体积流量对脱氧率和传质系数的影响，并对比了两个水脱氧体系的脱氧效果。实验结果表明：脱氧率随转子转速和气体体积流量的增加而升高，随液体体积流量的增加而降低；传质系数随着转子转速、液体体积流量、气体体积流量的增加而增加；此外，N₂-水脱氧体系的脱氧效果要优于CO₂-水脱氧体系。     

Transient pressure analysis for the reactor core and containment of a HTGR after a primary loop pressure boundary break accident

The pressure variances in the reactor core and containment of a High Temperature Gas-cooled Reactor (HTGR) after a primary loop pressure boundary break accident determine the structural integrity and safety of the reactor. Based on mass conservation, energy conservation and state equations, explicit formulae for the transient pressure and temperature variances in the pressure vessels were deduced, and a set of differential equations for the transient pressure and temperature variances in the containment were developed. Numerical simulation was also conducted to investigate the transient pressure and temperature variances in the pressure vessels and containment. The results show that energy transformation due to expansion work cannot be neglected. The maximum pressure in the containment could increase by 40 percent due to blockage caused by air in the containment. Detailed numerical simulations of the transient pressure and temperature variance in the reactor core flow passages were also conducted. The results show that the pressures acting on the reactor core and containment are below acceptable values.     

A brief introduction to neutron activation analysis in China

The history, the major achievements in both methodology and applications, the current trends and future perspectives of neutron activation analysis (NAA) in China are briefly described.     

针对立管重入井过程中等路径段加速度的改进型蚁群优化算法

在自由悬垂立管动力学分析的基础上，提出了一种针对等路径段内的加速度进行优化的改进型蚁群算法.通过该算法得出的立管顶端的优化运动策略，可以有效地减小立管底端在平移结束时同海底井口的距离，同时缩短重入井作业需要的时间，使得钻井立管重入井作业更加便捷.通过对比在优化后的运动策略下和在普通的运动策略下自由悬垂立管的不同动力学响应和型态变化，说明针对等路径段加速度进行优化的蚁群优化算法可以有效地优化立管重入井过程中的立管型态和运动，使重入井作业更加便捷.
     

SCWR for Future LargeScale Nuclear Power Generation

The ambitious nuclear power program motivates the Chinese nuclear community to develop advanced reactor concepts of generation IV, in order to ensure the longterm, stable and sustainable development of nuclear power. The supercritical watercooled reactor (SCWR) has favorable features in economics, sustainability and technology availability. It is the logical extension of the existing PWR technology and has very promising perspectives in largescale power generation in China. This paper describes the main features of SCWR. New designs of SCWR core structure and fuel assemblies are proposed. Preliminary analysis using a coupled neutronphysics/thermalhydraulics method is carried out and shows a good feasibility of the new design proposal.     

乏风瓦斯热逆流反应器的流动压力损失特性

分析了热逆流反应器压力损失的组成和机理,上下集气箱内和陶瓷床内部的摩擦阻力损失和陶瓷床进出口的局部损失,建立了各部分压力损失的相应公式并根据实验数据进行了计算.结果表明:陶瓷床进出口的局部流动损失远小于摩擦阻力损失,因此可以在损失分析时忽略以使问题简化;下集气箱中的摩擦阻力损失明显大于上集气箱和陶瓷床,并且对进口流速的增长最为敏感,在总损失中占据首位;给出了热逆流反应器的总压力损失计算公式,应用该式可对不同流量工况下的总损失进行计算.     

IC厌氧反应器处理马铃薯淀粉废水特征研究

采用IC(厌氧内循环)法,通过自行研制的IC反应器,研究了马铃薯淀粉废水处理效果,结果表明:初次启动历时25 d,二次启动仅仅历时6d,COD去除率均可保持在80％以上;反应器所能耐受的最大有积负荷为40.57 kg COD/(m3·d);最经济有效的停留时间为5h,最佳负荷为28.75 kg COD/(m3·d).     

CuZnAl双功能催化剂上一步法合成二甲醚的工艺研究

探讨TC301／γ-Al2O3和C207／γ-Al2O3双功能催化剂上合成气一步法制取二甲醚的反应,考察了催化剂浓度、原料气氢碳比和搅拌转速对一氧化碳转化率和二甲醚收率的影响．结果表明：在浆态床反应器内,催化剂C301的催化效果优于C207,且催化剂最佳浓度为7．27％;在300r／min搅拌转速下,外扩散阻力的影响基本可以消除;当原料气氢碳比为1．0时,二甲醚收率最大,进而提出利用富碳合成气生产二甲醚是缓解能源问题和减少能源污染的一条新途径．