粉末冶金陶瓷模工艺中的快速脱蜡新技术

粉末冶金陶瓷模工艺是一种先进的过净形成形工艺．本文报道该工艺中一种新的脱蜡技术．采用快速加热、管径集中热量和定向导热传热综合方法，在陶瓷模和大部分蜡模材料处于较低温度下，使蜡模材料来不及发生显著的热膨胀而直接蒸发，得到脱蜡干净、外形完整的陶瓷模．     

中水回用前景及其实际意义

概述了中水及中水回用的概念,分析了目前中水回用中存在的问题,探讨了水源热泵技术的应用。     

A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...     

Study on Ceramic Cutting by Plasma Arc

Engineering ceramics are typical difficult-to-machine materials because of high hardness and brittleness. PAC (Plasma Arc Cutting) is a very important thermal cutting process and has been successfully used in cutting stainless steel and other difficult-to-machine alloys. PAC‘s application in cutting ceramics, however, is still limited because the most ceramics are not good electronic conducts, and transferred plasma arc cannot be produced between cathode and work-piece. So we presented a method of plasma ...     

浅埋煤层开采中的溃沙灾害研究

分析了浅埋煤层开采的水文条件和工程地质条件，得出了浅埋煤层发生渍沙灾害必须具备的4个条件；根据浅埋煤层中组合关键层的一些参数分析了老顶破断岩块的运动规律，判断了浅埋煤层开采中岩块是否发生回转失稳，探讨了岩块回转触矸后发生滑落失稳的可能性，计算了断裂岩块端角接触面高度，得出了满足裂隙滤沙的合理端角接触面高度；大柳塔1203工作面开采只发生了涌水而未溃沙，这和理论计算的结论基本一致．参8．     

新型压电陶瓷涡街流量计

介绍一种新型的压电陶瓷涡街流量计,该流量计采用ＢＳＴ压电陶瓷元件来检测旋涡释放频率,使该流量计能在高温工况下工作,一年多的工业现场运行试验结果表明,新研制的涡街流量计可靠性高、稳定性好,在４００℃高温和１０ＭＰａ高压下能长期连续正常运行。     

悬砂稠化剂流变特性研究

研制出一种具有三维网络状结构的悬砂稠化剂，该稠化剂具有极强的悬砂能力，能与山砂以任意的配比形成复合浆体，并将山砂和水固结在一起而不脱水，极大地提高了砂浆防灭火效果；此外使砂不易堵管，大大地降低砂子对管道的磨损，并有利于管道长距离输送．并对悬砂稠化剂流变特性进行了研究，得到该稠化剂是具有剪切稀化特性的假塑性非牛顿流体；当悬砂稠化剂浓度为0．4％时，溶液具有最佳的流体力学特性；同时悬砂稠化剂的粘度与Ca^2＋离子浓度、Na^＋离子浓度、pH值、温度以及存放时间等因素密切相关．最后，用悬砂稠化剂进行了悬浮山砂的实验，制备出具有优良防灭火性能的稠化砂浆．图7，参8。     

旧沥青路面再生研究的现状与工艺

旧沥青路面再生利用是一项新的沥青路面修筑技术 ,它具有节约材料、降低沥青路面造价及保护资源 ,可以减少废旧沥青路面对环境的污染与破坏作用 .目前世界各国都非常重视 ,我国也是如此 ,随着我国首条高速公路 (沈大高速公路 ,1 988年建成 )即将进入维修时期 ,废旧沥青路面再生利用日益迫切 .文章分析了国内外旧沥青路面再生研究的现状与工艺 ,分析了旧沥青路面再生混合料的设计及施工工艺 ,提出我国实行旧沥青路面再生工作的迫切性和意义     

ZrO2陶瓷材料在水环境中的疲劳断裂特性

采用断裂力学中的四点弯曲试验法 ,对 Zr O_2 陶瓷材料分别在大气、水环境中的静疲劳和循环疲劳破坏特性进行研究 ,通过扫描电子显微镜 (SEM)对试验片断裂面的微细组织进行观察 ,分析并阐明了造成材料疲劳断裂的机理 .结果表明 ,相同应力条件下 ,材料在水环境中的疲劳寿命比大气环境中低以及循环疲劳对材料的疲劳寿命起到劣化作用 ,该劣化作用可以认为是由于循环应力使得微裂纹增加和扩展造成的 .     

The age of formation of the mirabilite and sand wedges in the Hexi Corridor and their paleoclimatic interpretation

The Hexi Corridor is located at the transition zone of the Asian summer monsoon and westerly airflow, and lies in an important position in terms of its ecological fragility and climatic sensitivity. During a recent field expedition to this region, we found a sedimentary mirabilite layer in a number of localities including Suwushan, Yanchi, Baitujing, Yanchi Gaotai, Huahai, Yumen, Halanuo扙r, and Dunhuang (Fig. 1), which have the potential to provide important information about environmenta…