道路标线涂料的正交试验研究

以苯乙烯为反应性溶剂，废旧聚苯乙烯泡沫塑料、不饱和聚酯树脂为主要原料制备道路标线涂料，通过正交试验确定了涂料的最佳配比。制备的道路标线涂料具有施工方便、涂膜厚度适当、附着力强、气候适应性强等特点。并通过电镜分析对涂膜的微观结构进行了初步探讨。     

一种新型矩阵式可控整流器的研究

基于三相-三相矩阵式电力变换器的拓扑与开关函数，建立了一种三相可控整流器的变换拓扑和开关函数矩阵，理论分析与仿真分析了该整流器的变换性能．结果表明该整流器具有宽范围输出电压调节能力、输入电流零位移和能量的双向流动等优点。     

基于桐油包膜材料的包膜尿素的研究 (I)包膜材料的FTIR,DTA-TGA研究

 用FTIR和DTA-TGA联用技术研究了桐油包膜尿素中使用的桐油、桐油/无机调理剂混合物的红外吸收特征和热行为,用800℃热分解残重率法测定了包膜材料中桐油聚合物的实际含量.结果表明,包膜中桐油的双键特征吸收明显减少甚至消失,无机调理剂的引入使桐油聚合物在程序升温过程中的放热峰温向高温移动.在包膜率相近的情况下,由含有无机调理剂的桐油包膜材料制备的包膜尿素,包膜材料中桐油聚合物的含量越大,包膜尿素的缓释性就越好.     

AutoCAD与Microsoft office的数据转换

针对AutocAD与Microsoft Officce的Word、Excel、Visio及PowerPoint软件之间图形等信息的共享与转换进行研究，从而在不需二次开发的情况下同时使用AutoCAD和Microsoft Office软件，解决AutoCAD与Microsoft Officce软件之间信息共享和转换问题，使各软件优势互补．结果表明此研究对工程实际具有非常大的实用价值．     

Study and Application of Internal Coating Technique to Drag Reduction of the Trunk Pipeline for the West-East Gas Pipeline

Coverage layer coated in the internal wall of pipeline enables the friction drag to be reduced, the throughput and the gas transmission efficiency to be increased, the frequency of pigging and the number of the intermediate compressor station to be reduced, and the power consumption of the compressor to be decreased etc. The drag reduction is a high advanced scientific technique with outstanding economical benefit. The study and application of internal coating technique for drag reduction of 4000km trunk pipeline in West-East gas transmission pipeline (WEGTP) project are described, in which the main points are the drag reduction principle, coating process and the indoor study of this technique with own-decided knowledge property right at home.     

一种超宽带反射型极化转换超表面设计

提出了一种超宽带、反射型极化转换超表面,该极化转换超表面由"H"形周期金属贴片结构,介质板和金属底板组成。通过改变单元结构尺寸,可以使反射波2种交叉线极化分量的幅度相同,相位差接近±π/2。仿真与实测结果表明,该极化变换超表面在6.40~15.40GHz,17.49~18.14GHz频带内能将线极化入射波转换为轴比小于3dB的圆极化反射波;在15.81~17.26GHz频带内能将线极化入射波转换为极化转化率大于80%的交叉线极化反射波。该结构具有单元尺寸小,工作频带宽,能量损耗低的特点,可以在有限的平面内加载更多的单元结构。该极化变换超表面在电磁波调控、新型天线设计等方面具有一定的应用价值。     

Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering

To investigate the change of the mechanical properties of soft metals doped PVD(Physical Vapor Deposition)coatings after the migration of soft metal to the surface, TiN-Cu coating was deposited on Si(100) by magnetron sputtering. The microstructure and mechanical properties at room temperature and after vacuum heat treatment at 300 ℃ were investigated. The results showed that the grains were clustered and the microstructure was porous for TiN-Cu coating at room temperature, while many micro-and nano-sized Cu particles were observed on the surface after vacuum heat treatment at 300 ℃. The elastic properties of the TiN-Cu coating after vacuum heat treatment at 300℃ degraded compared with that at room temperature. The hardness and elasticity modulus of TiN-Cu coating kept constant(3.7 GPa and 125.0 GPa, respectively) with the increase of nano-indentation depth, while the hardness and elasticity modulus of TiN-Cu coating after vacuum heat treatment at 300 ℃ increased gradually.     

单相交流输入永磁同步电机功率变换电路研究

针对单相正弦交流电源供电的永磁同步电机控制系统的功率变换电路进行研究。对滤波电容、整流管BR的电流以及控制系统主电路的参数进行了分析和计算,并推导出关键参数的计算公式,通过实验验证了电路参数计算方法的可行性。该研究对功率变换电路的设计具有一定的参考价值。     

激光重熔高速电弧喷涂FeNiCrAl涂层的组织与断裂韧性

采用激光技术对高速电弧喷涂FeNiCrAl涂层进行重熔处理.分析了重熔前后涂层的组织结构、物相成分、显微硬度与断裂韧性.结果表明:重熔后,喷涂层片层状堆叠结构与孔隙得到消除,组织结构变得均匀、致密,涂层与基体由机械结合变为冶金结合.喷涂层物相主要有α-Fe及金属间化合物AlFe₃,AlFe和Al_0.4Fe_0.6,重熔后,生成了新相Fe-Cr,［Fe, Ni］固溶体和碳化物NiC_○x.重熔后涂层的平均显微硬度为7.79GPa,约为基体硬度(2.5GPa)的3倍,约为喷涂层硬度(6.0GPa)的1.3倍.载荷为4.9,9.8N时,喷涂层的压痕尖头出现裂纹,涂层平均断裂韧性为1.20MPa·m^1/2,载荷为2.94~9.8N时,重熔后涂层的压痕尖头均没有观察到裂纹.     

降低OFDM系统复杂度的改进SLM算法

为了降低正交频分复用(OFDM)系统中传统选择性映射(SLM)算法的计算复杂度,提高系统的频谱利用效率,提出了基于转换向量(conversion vectors)与随机筛选序列(random selection sequences)相结合的选择性映射(CR-SLM)算法.CR-SLM算法是将原始信号序列等分,然后对于数据序列的前半部分与转换向量相乘进行循环卷积,对于数据序列后半部分进行随机序列筛选,筛选出最优序列.最后将两部分输出序列合并生成候选序列,筛选出最优序列进行传输.仿真结果表明:CR-SLM算法在保持与传统SLM 算法PAPR性能相近的情况下,较大幅度降低了计算复杂度.