冷却方式对Mg-3Nd合金显微组织和物相构成的影响

制备了急冷和铸造的Mg-3mass%Nd合金,采用显微组织分析、X-射线物相分析、电子探针微区成分分析、硬度和强度等检测分析,研究了合金的显微组织、物相构成和力学性能.探讨了压缩变形对铸态合金组织和性能的影响.结果表明,急冷可以大幅度减小晶粒尺度及改变合金的物相构成.急冷合金的物相构成为过饱和α-Mg固溶体相;铸态样品的物相构成为α-Mg固溶体和Mg41Nd5.实验还表明,铸态样品压缩变形后产生大量的形变孪晶,提高了合金的强度.     

昆嵛山珍稀濒危植物资源及保护

报道了昆嵛山21种濒危植物资源的主要形态特征、分布和保护价值,并根据昆嵛山的特点 提出了相应的保护策略.通过对这些濒危植物的调查和概括,为昆嵛山濒危植物的研究和保护提供 了基础性资料.     

面向海上移动目标的空天协同连续观测模型

由于视距限制,对海上移动目标进行连续观测与定位探测难度较大.现有方法通过卫星和无人机等单平台对目标进行观测,不能解决面向海上移动目标连续观测的问题.针对当前单个平台的不足,本文构建了面向海上移动目标的空天协同连续观测模型,并提出了空天协同连续观测策略.空天协同连续观测策略抽取出卫星规划、无人机飞行计划、观测序列、区域预测以及路径规划等五个子问题,并对其进行建模求解.仿真实验表明,该方法大大降低了目标的平均观测周期,有效解决了海上移动目标连续观测问题.     

微量镍元素添加对铁基非晶/纳米晶磁芯软磁性能的影响

用单辊法制备的宽20 mm,厚25μm的Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9和Fe_(73.5)Ni_(0.3)Cu_1Nb_3Si_(14.2)B_8合金带材,绕制成外径为40 mm,内径为25 mm的环型磁芯,然后将磁芯在不同的温度下进行退火处理,研究了微量Ni元素添加对合金带材的晶化行为以及对横向磁场退火后的非晶/纳米晶磁芯的软磁性能的影响。结果表明:与Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9合金带材相比,添加微量Ni元素的Fe_(73.5)Ni_(0.3)Cu_1Nb_3Si_(14.2)B_8合金带材的一级起始晶化温度Tx1和一级晶化峰温度Tp1降低,其二级起始晶化温度Tx2和二级晶化峰温度Tp2升高,两级起始晶化温度之间的差值ΔTx增大;与横向磁场退火后的Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9非晶/纳米晶磁芯相比,横向磁场退火后的Fe_(73.5)Ni_(0.3)Cu_1Nb_3Si_(14.2)B_8非晶/纳米晶磁芯的起始磁导率μi和饱和磁感应强度Bs减小,矫顽力Hc增大;当测试频率f和最大磁感应强度Bm不变时,有效幅值磁导率μa增大,比总损耗Ps和矫顽力Hc减小;当测试频率f不变时,电感Ls和品质因数Q增大;当励磁电流I不变时,感应电动势E大。     

卫星通信在应急通信中的应用及发展

 介绍了国外应急通信的应用模式、政策、手段以及国内应急通信体系的建立与发展,讨论了卫星通信系统在应急领域的应用,展望了卫星通信的新技术、新方向及其未来发展。     

石墨烯复合材料在警车防弹防护方面的研究

研究警车高性能防弹防护材料应用技术,尝试采用石墨烯改性的方式对陶瓷及铝合金的强度、韧性性能进行了改性提升,利用石墨烯改性材料制备了复合防弹板,并进行了实弹射击试验,研究了防弹警车应用可行性.试验结果表明,石墨烯改性可以有效提高陶瓷的断裂韧度,以及铝合金的强度及弹性模量.经53式7.62 mm穿甲弹三次射击,靶板无穿透,用石墨烯改性陶瓷制备的防弹装甲板,可有效降低材料密度,大幅度提高防弹性能,对车辆防弹性能及轻量化技术研究具有一定的参考价值.     

Experimental investigation and thermodynamic assessment of the yttriumhydrogen binary system

A coupled experimental investigation and thermodynamic study of the yttrium-hydrogen(Y-H) binary system were carried out to provide more comprehensive and quantitative insights into the key thermodynamic properties of this system. Y-H system in the full range of H/Y = 0–3.0 was investigated by accurate pressure composition isotherm(PCI) measurement to provide credible phase equilibria information and thermodynamic data.The phase boundaries obtained were in agreement with previous experimental data but with improved accuracy.With the guide of the crystal structures, all the solid phases were modelled using the three sublattice model. The Y-H phase diagram and thermodynamic parameters were calculated and assessed with the CALPHAD technique.The obtained results are in very good agreement with our experimental data and the published data reported in literature. The obtained thermodynamic database of Y-H system can be used to predict the hydrogenation behavior and decomposition temperatures of hydrides.     

Improved dehydriding property of polyvinylpyrrolidone coated Mg-Ni hydrogen storage nano-composite prepared by hydriding combustion synthesis and wet mechanical milling

In this work, polyvinylpyrrolidone(PVP) coated Mg_(95)Ni_5 nano-composites were prepared by hydriding combustion synthesis(HCS) plus wet mechanical milling(WM) with tetrahydrofuran(THF) and donated as WM-x wt% PVP(x = 1, 3, 5 and 7) respectively. The phase compositions, microstructures and dehydriding property, as well as the co-effect of PVP and THF were investigated in detail. XRD results showed that the average crystal size of MgH_2 in the milled Mg_(95)Ni_5 decreased from 23 nm without PVP to 18 nm with 1 wt% PVP. The peak temperature of dehydrogenation of MgH_2 in the milled Mg_(95)Ni_5 decreased from 293.0 ℃ without THF to 250.4 ℃ with THF. The apparent activation energy for decomposition of MgH_2 in WM-7 wt% PVP was estimated to be 66.94 kJ/mol, which is 37.70 kJ/mol lower than that of milled Mg_(95)Ni_5 without THF and PVP. PVP and THF can facilitate the refinement of particle size during mechanical milling process. Attributed to small particle sizes and synergistic effect of PVP and THF, the composites exhibit markedly improved dehydriding properties.     

Study on the hydrogen storage property of (TiZr0.1)xCr1.7-yFeyMn0.3 (1.05

Jigang Li  Li Xu  Xiaojing Jiang  Xingguo Li 《自然科学进展(英文版)》2018,28(4):470-477

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.