ρ~n次幂对径向波函数R_(ne)平均值的计算通式

本文用广义Ｌａｇｕｅｒｒｅ多项式的母函数表达式，证得文献〔１〕中，计算ρｎ次幂的类氢原子径向波函数Ｊｄ平均值的通式。     

理想状态立体象对象基线的一个恒等式及意义

发现了航片水平、地形平坦的理想状态下，关于立体象对象基线的一个恒等式：ｂ＝ｒ１｜ｃｏｓａ｜＋ｒ２｜ｃｏｓβ｜，式中ｂ为立体象对的象基线，ｒ１、ｒ２为航片上任意一个同名象点在立体象对左右邻片上的辐射距，α，β为该同名象点左右邻片上的辐射距与立体象对象基线的夹角。     

径向正解拐点的存在唯一性问题

设Ω是Rn中的环型区域,n>m>1.m-Laplace方程的边值问题是Δmu f(u)=0,x∈Ω,u|Ω=0,讨论其径向正解的拐点,给出了一个拐点的存在唯一性结论.     

基于红外图像的绝缘子串自动提取和状态识别

为解决目前绝缘子低零值检测方法漏判率高、操作繁琐的问题,提出了一种新的绝缘子串红外图像中绝缘子盘面和铁帽区域自动提取方法和状态识别模型.首先将现场拍摄的绝缘子红外图像进行灰度化处理、去噪、二值化;然后从二值图像中提取反映绝缘子的特征点集合;通过特征点对二值图进行角度校正;最后通过区域提取中的特定算法提取出绝缘子的盘面和铁帽区域.通过提取该区域内的绝对温度、纹理和相对温差率作为绝缘子状态识别的特征集.将用电压分布法测得的绝缘子状态信息作为输出向量,通过训练得到优化的识别模型,用于绝缘子状态识别.该方法经过了220kV试验验证,证实了模型的有效性和实用性.     

Software Maintainability Prediction with UML Class Diagram

Software system can be classified into many function modules from the perspective of user. Unified modeling language( UML) class diagram of each function module was extracted,and design characteristic metrics which influenced software maintainability were selected based on UML class diagram.Choosing metrics of UML class diagram as predictors,and mean maintenance time of function module was regarded as software maintainability parameter. Software maintainability models were built by using back propagation( BP) neural network and radial basis function( RBF) neural network, respectively and were simulated by MATLAB. In order to evaluate the performance of models,the training results were analyzed and compared with leaveone-out cross-validation and model performance evaluation criterion. The result indicated that RBF arithmetic was superior to BP arithmetic in predicting software maintainability.     

径向流吸附器内部结构对变压吸附制氧效果的影响

建立了两塔径向流变压吸附制氧实验装置,研究了径向流吸附器的气体流动型式、外流道宽度和流道结构对制氧效果的影响。结果表明：对于变压吸附制氧,径向流吸附器采用向心流动最为合适;在实验条件下,外流道宽度减小到13 mm时,氧和氮分离效果最佳;与Z型流道相比,Π型流道结构改善分子筛的利用率,产氧效果最好。     

基于Pareto定律参数优化的径向基近似建模

针对传统留一交叉验证法计算量大不适用于大规模复杂系统的问题,借鉴经济学中的Pareto定律,选择对全局误差大小起决定性作用的样本点作为关键点,对留一交叉验证法进行了改进,提出了基于Pareto定律的留一交叉验证方法。针对径向基模型形状参数的优化选择问题,将基于Pareto定律的留一交叉验证方法应用于形状参数的优化,提出了基于Pareto定律参数优化的径向基模型构造方法。测试表明,该方法构造的径向基模型具有良好的近似精度和较高的计算效率,具有推广的价值。     

Radial acceleration estimation of multiple high maneuvering targets

The acceleration of a high maneuvering target in signal processing is helpful to enhance the performance of the tracker and facilitate the classification of targets. At present, most of the research on acceleration estimation is carried out in cases of a single target with time-frequency analysis methods such as fractional Fourier transform （FRFT）, Hough-ambiguity transform （HAT）, and Wigner-Vil e distribution （WVD）, which need to satisfy enough time duration and sampling theorem. Only one reference proposed a method of acceleration estimation for multiple targets based on modified polynomial phase transform （MPPT） in the lin-ear frequency modulation （LFM） continuous-wave （CW） radar. The method of acceleration estimation for multiple targets in the pulse Doppler （PD） radar has not been reported so far. Compressive sensing （CS） has the advantage of sampling at a low rate and short duration without sacrificing estimation performance. There-fore, this paper proposes a new method of acceleration estimation for multiple maneuvering targets with the unknown number based on CS with pulse Doppler signals. Simulation results validate the effectiveness of the proposed method under several conditions with different duration, measurement numbers, signal to noise ra-tios （SNR）, and regularization parameters, respectively. Simulation results also show that the performance of the proposed method is superior to that of FRFT and HAT in the condition of multiple targets.     

原太阳吸收积盘模型及结构

在标准的α模型基础上，运用不同的对流和辐射理论，计算和比较原太阳吸积盘在粘滞演化阶段的径向和垂直结构，结果表明，扩散近似和混合程理论在原太阳吸积盘的构造中是很好的能量转移方和对流理论。     

利用硬盘特性对软件加密、解密

提出了2种利用硬盘特性设计加密／解密软件的方法；通过在电子海图系统和模拟器上的应用，证明了方法的有效性；这种软件加密方法特点是实现简单、隐蔽性好，成本低。