关于CTQ系列接触网支线故障智能切除装置防雷方式的探讨

介绍了CTQ系列接触网支线故障智能切除装置的结构原理、性能特点、实践应用,针对此装置安装在户外现场的实际情况,探讨了对直击雷和感应雷的防护措施。     

浅谈车身开闭件包边

在汽车生产中,车身开闭件（车门、前盖、后盖）常见的加工方式为包边,包边成形手段有多种,本文对目前汽车行业常用包边装置进行了简要介绍,通过各自工作原理,分析其优缺点,指出各种包边装置的应用领域。     

Synthesis of a novel multi-SO3H functionalized strong Brønsted acidic ionic liquid and its catalytic activities for acetalization

The novel multi-SO3H functionalized strong Bronsted acidic ionic liquid has been prepared and its catalytic activities were investigated through the acetalization. The results showed that the novel catalyst was very efficient for the reaction with the average yield over 90% under solvent-free condition at room temperature. Operational simplicity, without need of any solvent, a small amount of usage, low cost of the catalyst used, high yields, applicability to large-scale reactions and reusability are the key features of this methodology. The novel catalyst also has great potential for the green process.     

智能型电冰箱断电延迟保护器

本文介绍了一种智能型电冰箱断电保护器的电路、工作原理及其优点。     

车载 RFID设备电磁抗扰度测试研究

为了测试 RFID设备在汽车复杂电磁环境下的电磁抗扰度(EMS),提出一套 EMS测试方案.方案采用限值测量法制定,分析干扰信号耦合原理及受试设备工作环境确定了测试项目和测试方法,且从测试结果准确度方面提出了判断测试是否合格的计算公式.按照方案对车载无钥匙进入系统进行了测试,测试结果已被某车厂使用,验证了其可行性.本方案还对于 RFID设备EMS测试规范的制定具有参考价值     

The evolution of a trading zone: a case study of the turtle excluder device

This paper explores the evolution of a trading zone by organizing the case study of turtle excluder devices within the model proposed by Collins et al. (2007). The case study offers evidence that trading zones do evolve and that the concepts of enforced and fractionated trading zones hold practical utility for describing and defining the complexities of actual exchanges. In this case a trading zone evolved from enforced to fractionated and ultimately diverged into two trading zones. For each step of the evolution I describe the forces that drove these transitions. Finally, I present an adapted trading zone model that is conceptually a better fit for the turtle excluder device case study.     

液压提升装置的研发

介绍了液压提升装置的组成,讨论了该装置结构部分的设计思路和分析过程,并总结了研发过程的经验教训。     

探讨宫内节育器在人工流产术后即刻放置的临床疗效

目的:探讨宫内节育器在人工流产术后即刻放置的临床疗效。方法:将自愿要求人工流产终止妊娠短期内无生育要求的健康育龄妇女600例随机分为观察组和对照组各300例。观察组为人工流产术后即刻放置宫内节育器,对照组不予特殊处理。观察两组术后阴道流血量、出血时间、月经复潮时间、痛经、闭经、避孕效果的情况及不良反应。结果:观察组人工流产术后阴道流血量、流血时间、月经复潮时间、痛经、闭经与对照组无明显差异,避孕效果优于对照组(P﹤0.05),无体重增加,无不良反应。结论:人工流产术后即刻放置宫内节育器可有效减少重复流产及宫腔、宫颈粘连、盆腔感染,是一种安全、有效并简单的避孕方法,值得推广。     

对反兴奋剂目标的再思考

体育领域内的反兴奋剂问题一直是国际体育界争论的一个焦点,对于其必要性和重要性在国际上也有着不同的看法。本文着眼于体育领域内反兴奋剂的三个目的:保持公平的竞争环境,保护运动员的健康,维护体育形象出发,对不同观点进行了分析和探讨。     

钼粉还原自动化生产线装料称重装置的设计

针对钼粉还原炉自动化生产线的工艺需求,设计了一种装料称重刮平与现场控制为一体的钼粉自动化装料称重装置。详细论述了该装置的机构组成及工作原理,并以ADuC824单片机为主控单元、EPM7128为逻辑信号处理单元构建完整的软硬件测控单元平台,设计制作了相应的部件单元和软件程序,并进行了现场试运行实验。实验结果表明,该称重装置重复性测量精度标准差为1.5 g,最大相对误差为0.11%,达到了钼粉还原炉自动化生产线所要求的称重误差控制要求。