w(Co)对CB2钢显微组织和力学性能的影响

为研究w(Co)对CB2钢微观组织和力学性能的影响，调整CB2钢中w(Co)为0.5%，1.0%，1.5%，2.0%和3.0%.利用光学显微镜(OM)、扫描电镜(SEM)、室温拉伸等检测方法研究w(Co)对试验钢微观组织和力学性能的影响规律，结合Thermo-Calc和JMatpro-7.0模拟结果解释其影响机理.研究发现:w(Co)增加提高铬当量的值，使试验钢中δ铁素体含量减少，当w(Co)增加到1.5%时，δ铁素体基本消失;材料的抗拉强度随w(Co)的增加而增加，而延长率则先增加后降低;结果表明，w(Co)为1.5%时综合性能较好，即抗拉强度达到805.13MPa，延长率达到20.4%，布氏硬度为260.     

木枣多糖的理化特性研究

木枣经超声波辅助酸性缓冲液浸提、醇沉、脱蛋白和脱色工艺制得木枣多糖,测定其溶解性与单糖组成,采用Q2000型差示扫描量热仪和ZX7M-AR1000型流变仪研究木枣多糖的稳定性和流变性,为其在食品工业中的应用提供理论数据支持。实验结果表明,木枣多糖溶于热水,难溶于冷水,不溶于有机试剂；是由鼠李糖、阿拉伯糖、甘露糖、葡萄糖、半乳糖组成的杂多糖。热学特征分析表明木枣多糖具有较好的热稳定性；木枣多糖溶液为非牛顿假塑性流体,表现出剪切变稀的特性；因此木枣多糖适用于在食品生产工业中做稳定剂。     

ePTFE人工血管管壁结构及其体外性能的试验研究

对国内外两组膨体聚四氟乙烯(ePTFE)人工血管从管壁结构、理化性能和生物力学性能进行对比研究.通过试验研究两组人造血管管壁的宏观及微观结构、表面润湿性、结晶度和融熔温度、周/轴向拉伸、顶破拉伸以及手术线固位强力,对比两组样品的性能差异,并分析了导致差异的可能原因,讨论了管壁结构、理化性能与力学特性之间的关系.研究结果表明,国产和进口ePTFE人工血管试样均为双层结构,两者都有良好的疏水性表面和抗水渗透性.但进口试样具有更加规整均匀的节点和纤维形态结构,有利于人工血管的生物耐久性.     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

循环应力对储气库岩石微观结构及力学性质影响数值模拟

针对储气库循环注采过程中循环应力对储气库岩石产生疲劳损伤的问题。利用颗粒离散元法建立岩心真三轴数值模型,根据岩心室内试验标定数值模型参数,然后对数值模型进行多周期等幅值轴向循环应力加载,研究循环应力对储气库岩石微观结构及力学性质的影响。结果表明:循环应力加载过程中,模型内生成的无黏结接触数量和微裂缝数量逐渐增多,而生成位置受原始裂缝控制明显,模型孔隙度逐渐减小,且模型内无黏结接触数量、微裂缝数量和孔隙度的变化速率均呈递减趋势;相同应力水平下模型侧向应变和轴向应变均增大,但侧向应变占主导地位;模型弹性模量逐渐降低,而模型泊松比和损伤量逐渐增加,且模型弹性模量、泊松比和损伤量的变化速率均呈递减趋势。     

A357履带板的半固态触变成形工艺研究

采用半固态触变成形实验,对履带板件进行了模具设计、成形工艺参数制定,成功制得A357铝合金履带板件。并通过拉伸试验和微观组织观察,研究了T6热处理工艺对零件的力学性能和微观组织的影响。试验结果表明:经过T6热处理工艺,过饱和的基体中不断析出强化相Mg₂Si并高度弥散分布在晶粒内部与晶界处,零件的强度得到较大提高。     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

朝鲜崖柏生境及高生长规律分析

采用标准地调查法测定朝鲜崖柏的土壤特征、林下植被和高生长规律.结果表明:朝鲜崖柏生长于土层较薄且呈弱酸性的山地暗棕壤,不同标准地林下植被差异明显;不同标准地朝鲜崖柏树高的年生长量均呈逐年下降趋势.     

Preparation and Mechanical Properties of a Novel Textile Pad for Wound Debridement

Various types of wound debridement approaches are currently available in clinical practice such as autolytie, enzymatic. biodebridement, mechanical, and surgical debridemenl techniques. A critical look at these various options can explain their potential but also their limitations. In this study, a novel textile pad, which is composed of polyester filaments on the fleecy side and a bioeompatible coating on the opposite side, was made to provide a safe, inexpensive, easier and especially more efficient debridement process that can be used in all healthcare settings by all healthcare practitioners. Eighteen kinds of samples were prepared with different pile density, ground yarn count and coating amount. Dimensional morphology, stitch density, mass per unit area and mechanical properties were investigated to study the intrinsic relationship of structure and properties of textile pad for wound debridement. Results showed that tensile strength and suturing strength at piped site increased obviously with the increment of ground yarn count, while the amount of coating could also have a slight impact on these two properties. However, compressive load was mainly affected by pile density, with no obvious relation to ground yarn count and coating amount.     

水热法制备Li_(4-3x)Eu_x(WO_4)_2微晶及其发光性能

采用水热法制备了Li_(4-3x)Eu_x(WO_4)_2系列红色荧光粉.通过荧光分析(FL)、扫描电镜(SEM)和X射线衍射(XRD)对所得粉体的发光性能、颗粒大小及形貌和物相进行表征分析.XRD分析结果表明,制备的Li_(4-3x)Eu_x(WO_4)_2微晶均为白钨矿四方结构.SEM结果表明,Li_(4-3x)Eu_x(WO_4)_2颗粒度为2.0μm×0.2μm~12μm×1.0μm,且随x的增大而增大.荧光分析结果表明,该荧光粉可被近紫外光(395nm)有效激发,最大发射波长位于614nm,即为纯正的红光.随着x的增大,样品中Eu~(3+)的593nm和614nm两个特征发射峰的强度先增大后减小,当x=1.0时达到最大.