伪双曲方程一个非协调混合元方法超收敛分析

基于非协调EQrot1元和零阶R-T元针对伪双曲方程,建立了一个自然满足B-B条件的非协调低阶混合元逼近格式.借助单元插值算子的特殊性质、导数转移技巧和插值后处理技术,在半离散格式下给出了原始变量在H1-模和中间变量在L2-模意义下的O(h2)阶超逼近性与整体超收敛结果.同时,对于一个二阶全离散格式得到了原始变量H1-模的O(h2+τ2)超逼近性和中间变量L2-模的O(h+τ2)最优误差估计.     

极端嗜热菌Thermosipho melanesiensis普鲁兰酶基因的异源表达与酶学性质分析

选择来源于极端嗜热菌Thermosipho melanesiensis(DSM12029)的普鲁兰酶基因,以购自德国菌种保藏中心的基因组为模板,扩增出普鲁兰酶基因TM-pulA;利用酶切酶连构建了重组质粒pET21a-TM-pulA;转入大肠杆菌Rosetta(DE3)菌株中诱导表达并经纯化后,进行了水解产物分析和酶学性质测定.结果显示:TM-pulA为Ⅰ型普鲁兰酶,最适pH为5.8;最适温度是80℃;70℃下半衰期为4.75 h;Mn~(2+)、Co~(2+)、AL~(3+)、Fe~(3+)、SDS及EDTA对其酶活有不同程度的抑制作用;该酶的K_m、V_(max)、K_(cat)及K_(cat)/Km值分别为4.68 g·L~(-1)、0.0085 mmol·L~(-1)·s~(-1)、71.18 s~(-1)、15.21 L·g~(-1)·s~(-1).     

粒度对硼铁矿介电特性及微波加热特征的影响

采用谐振腔微扰法测定了不同粒度的硼铁矿在频率为2.45GHz和温度为20~800℃的介电特性,并测定其在微波场下的升温特征.结果表明:随着矿样粒度的减小,填充层空隙率降低,其介电特性增强,微波场中矿样的升温速率加快.当温度高于200℃时,矿样发生热分解产生大量微空隙而增大了空隙率,矿样的介电特性呈下降趋势,使得微波加热过程中矿样的升温速率降低.粒度对硼铁矿介电特性和升温特征的影响研究为微波在冶金领域中的应用及节约能耗提供理论依据.     

铝锡轴承合金的摩擦磨损机理与性能

铝锡轴承合金对大型载重汽车、坦克、高速汽车、拖拉机等的高速高压柴油机的发展有重要的意义。提高铝锡合金的耐摩擦磨损性能可节省大量能源并延长零件的使用寿命,如何取得具有优良的耐摩擦磨损的铝锡合金成为研究的重点。本文介绍了提高铝锡合金的耐摩擦磨损性能的措施及其影响因素,总结铝锡合金中锡元素含量改变、合金元素的添加、热处理与制备工艺的改变对铝锡合金的显微组织以及耐摩擦磨损性能的影响。     

酸性木聚糖酶产生菌XYW5的筛选及酶学性质

【目的】选育优良的产酸性木聚糖酶的微生物,考察酸性木聚糖酶的酶学性质(尤其是pH值为4.0),为实现纤维素乙醇低成本清洁生产打下基础。【方法】从广西大学农场采集土壤,富集后经产酸性木聚糖酶的培养,比较酸性木聚糖酶酶活力,选育酸性木聚糖酶高产菌株,鉴定菌种,分析酶学性质。【结果】筛选出产酸性木聚糖酶酶活力较高的菌株XYW5。扩增菌株XYW5的ITS rDNA序列,经测序分析比对,将其初步鉴定为日本曲霉Aspergillus japonicus XYW5。菌株XYW5产酸性木聚糖酶和酸性木糖苷酶的酶活力最高分别达(26. 26±0. 97)U/mL和(0.63±0.02) U/mL,比活力分别为(85.50±0.63) U/mg和(1.80±0.01) U/mg;其酸性木聚糖酶最适温度和最适pH值分别为65℃和6.5,酸性木糖苷酶最适温度和最适pH值分别为70℃和4.5;酸性木聚糖酶兼有酸性CMCase酶活力,达到8.54 U/mL。【结论】菌株XYW5所产的酸性木聚糖酶具有开发成为优良工业酸性木聚糖酶的潜力。     

改性化工污泥与煤的成浆性及燃烧性分析

选取两种方法对化工污泥进行改性并研究改性后的污泥添加量对污泥水煤浆(S-CWS)成浆性、流变性和燃烧性的影响,从而获得制备高浓度污泥水煤浆的工艺参数.结果表明:选用Na OH对污泥进行改性制备出的污泥水煤浆成浆性较好;改性污泥添加量在10%~20%,可以得到成浆性良好的污泥水煤浆;添加改性污泥的污泥水煤浆较普通水煤浆的燃烧性能增加.     

Characteristic investigation of trilayered Cu/Al8011/Al1060 composite: Interface morphology,microstructure, and in-situ tensile deformation

In this work, Cu/Al8011/Al1060 trilayered composite with an ultrathin copper layer was fabricated successfully by the hybrid process of cast-rolling and hot-roll-bonding. The effects of heat treatment were investigated on the microstructure and mechanical behavior of the composite. The results showed that annealing temperatures above 300 ​°C led to the formation of new intermetallic compounds that joined their initial counterparts. Also, the interface growth was fast above 340 ​°C. It was found that the annealing temperature of 320 ​°C led to the optimal tensile properties of the composite. Through rolling, hard-brittle IMCs imposed intense plastic strains on the surrounding regions, resulting in further grain refinement of both metals in the vicinity of the interface. Although the kernel average misorientation of the trilayered composite was almost identical with the Cu/Al8011 bimetal, its amount was considerably decreased after heat treatment, as the distorted structure changed into a nearly strain-free one using the restoration phenomenon. The SEM-based in-situ tensile test showed that crack initiation occurred within the IMCs and propagated into the Cu strip, leading to its early fracture. However, the strength-displacement curve during in-situ tensile deformation did not decrease significantly due to the ultrathin copper layer.     

Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques

In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical (nanoindentation, compression, tensile) and thermal properties (co-efficient of thermal expansion- CTE) of the developed Al-SiC nanocomposites were studied. The SEM/EDS mapping images show a homogeneous distribution of SiC nanoparticles into the Al matrix. A significant increase in the strength (compressive and tensile) of the Al-SiC nanocomposites with the addition of SiC content is observed. However, it is noticed that the ductility of Al-SiC nanocomposites decreases with increasing volume fraction of SiC. The thermal analysis indicates that CTE of Al-SiC nanocomposites decreases with the progressive addition of hard SiC nanoparticles. Overall, hot extruded Al 1.5 vol% SiC nanocomposites exhibited the best mechanical and thermal performance as compared to the other developed Al-SiC nanocomposites.     

渗碳体形态对高碳珠光体钢组织及性能的影响

为研究SWRS82B钢不同条件下进行的大过冷工艺所形成的渗碳体形态对珠光体亚结构组织及性能的影响,制定相关热处理工艺:将试样在880℃奥氏体化15 min后,以70,100,200℃/s的冷速过冷到300℃等温3~15s,之后升温至珠光体区等温1min,最后快冷至室温.通过SEM和TEM观察,以及MTS拉伸试验机得到的数据,结果表明,在过冷时间为3s的前提下,随着冷速的增长,渗碳体由完整片层状发生不同程度的碎化.在200℃/s时,渗碳体已经大面积碎化,并发现大量的纳米级渗碳体,抗拉强度表现为先降低后升高,伸长率持续升高.当冷却速度为70℃/s时,随着过冷时间的延长,抗拉强度和伸长率都表现为先降低后增大的特点.纳米渗碳体随着过冷时间的延长开始减少,到达15s时,开始出现了贝氏体组织.     

金红石TiO2(011)表面的理论研究进展

基于密度泛函理论 (DFT) 的第一性原理 (First-principles) 计算方法，就金红石TiO₂(011)表面在理论方面的研究进展做了介绍.首先，通过阐述研究金红石TiO₂(011)表面的必要性和实验在其结构方面的研究进展，介绍了金红石TiO₂(011)表面的电子结构和光学性质，指出并验证了该表面对可见光有较强的响应能力.随后，介绍了金红石TiO₂(011)表面的缺陷和杂质，指出吸附H原子和形成O缺陷后还能显著增强其在红外区的红外吸收.在此基础上，不仅从理论上提供了一些传统实验所无法提及的数据资料，还弥补了相关实验在微观领域研究中的不足.最后，就目前金红石TiO₂(011)表面研究中存在的问题做了展望，指出金红石TiO₂(011)表面各种表面现象的微观本质是未来研究的重点内容.