Wave Damping and Refraction-Diffraction Due to Variable Depth Porous Bottom

The refraction-diffraction of surface waves due to porous variable depth has been the subject of many investigations. In the present study, we extend the boundary-value problem of impermeable varying topography to that of a variable depth porous seabed, which is the situation most likely to be encountered in practical problems of coastal engineering. A wave-induced fluid motion is applied to the porous bottom, while the well-known linear potential theory is applied to the free-water above the bottom. Eigenfunction expansions are employed to derive the matching condition and the so-caUed modified dispersion relation. As a result of the porous bottom, the wavenumber becomes a complex value, of which the real part represents the spatial periodicity while the imaginary part refers to the energy dissipation. The characteristics of water waves over a porous bottom are studied in detail. By neglecting the non-propagating modes which only have a local effect and damp exponentially with distance, we derive a mathematical model to represent the characteristics of both the wave refraction-diffraction and wave-damping. The developed model is applied to the damping problem of waves over submerged porous breakwaters.     

分级多孔纳米炭纤维的结构及电容性能

以酚醛树脂为碳源、PVP为纺丝助剂、纳米MgO颗粒为模板剂,通过静电纺丝法制得酚醛树脂基纳米炭纤维,经过炭化、KOH活化、酸洗后得到分级多孔纳米炭纤维,利用SEM、XRD、XPS、拉曼光谱仪及氮气吸脱附实验,对所制多孔纳米炭纤维的结构和形貌进行表征,并将其作为模拟电容器的电极,利用循环伏安、恒电流充放电及交流阻抗方法测试了材料的电化学性能。结果表明,KOH活化引入了数量可观的微孔,所得纳米炭纤维表现出明显的"微孔-中孔-大孔"分级孔分布的特点,其比表面积达到1058.4m~2/g,总孔容为1.64cm~3/g。电化学测试结果表明,所制分级多孔纳米炭纤维在6mol/L KOH电解液中显示出优异的电容性能,在0.2A/g的电流密度下,其放电比容量达到198F/g,在20A/g电流密度下,电容保持率达到65%。     

考虑低渗点启动压力梯度的中东孔隙型碳酸盐岩油藏波及系数修正方法

 根据中东地区孔隙型碳酸盐岩油藏渗透率分布范围大、低渗与中高渗渗流规律并存的特征,针对低渗点存在启动压力梯度而难以动用的问题,采用数值模拟方法分析低渗点启动压力梯度对油藏波及系数的影响规律,通过耦合低渗点启动压力与井间驱替压力分布,提出考虑低渗点启动压力梯度的孔隙型碳酸盐岩油藏波及系数修正方法。以中东地区M油藏为例进行应用分析,计算得到的渗透率为5×10^-3~35×10^-3 μm²、变异系数为0.6~0.8时,波及修正系数分布范围为0.75~0.99,证明了该孔隙型碳酸盐岩油藏波及系数修正方法的可靠性和实用性。     

一类多孔介质型扩散互惠模型的共存态和渐近性

研究了一类具有多孔介质型扩散的3种群互惠模型Dirichlet边值问题.在适当的条件下,证明了该时变问题存在唯一有界整体解,且除了平凡解和半平凡解之外,相应的平衡态问题还存在正的最大解和最小解.此外,该时变解在一些初值函数下收敛到最大平衡解,而在另一些初值函数下收敛到最小平衡解.这种收敛性对反应函数的任意系数都成立.该结果意味着带多孔介质型扩散的互惠模型的动力学性态不同于带常数扩散项的.     

Tussah Silk Fibroin Porous Scaffolds Prepared with a Mild Self-assembly Process for Controlled Drug Release

Besides excellent biodegradability and biocompatibility,a useful tissue engineering scaffold should provide favorable surface properties,outstanding mechanical strength and controlled drug release property. In this paper,a mild process to prepare porous tussah silk fibroin（ TSF） scaffolds from aqueous solution was described. The n-butanol was used to control the self-assembly of tussah silk. The scaffolds with different TSF concentrations and the same volume showed differences in pore size and distribution. The maximum porosity of the poprepared porous scaffolds was 80% in this paper. And the pore size of the prepared porous scaffolds with different concentrations was between 10μm and 230 μm. X-ray diffraction（ XRD） analysis revealed that amorphous TSF was crystallized to β-sheet secondary structure upon gelatin. The TSF scaffolds for controlled drug release was studied and the result showed that the time of drug release was significantly longer. The produced TSF scaffolds with sustained drug release have potential application in tissue engineering.     

硅基微纳结构薄膜中全向光吸收效应

研究了一种由硅基光子晶体与金属复合微纳结构薄膜中的全向光吸收效应。与完整的硅/金属复合薄膜进行比较研究发现,在硅薄膜厚度相同的条件下硅基微纳结构薄膜能够使吸光度提高近70%。此外,结果显示这种光吸收增强效应对入射角度的变化不敏感。在以0°~60°角度入射的情况下,硅微纳结构薄膜都能够具备接近100%的光吸收。通过对能带以及场构型分析可以发现,这种现象产生的原因归结于金属平板与截断光子晶体中特殊的边界陷光效应和六角晶格的全向带隙。     

阳极氧化铝模板高有序孔的形成机理综述

阳极氧化铝模板法是合成纳米阵列材料的最常用的方法,然而有关氧化铝纳米孔的形成机理却没有达到统一的认识.利用26篇文献综述了氧化铝膜的理想结构和电场辅助的溶解模型、体积膨胀的应力模型、稳态孔的生长模型、临界电流的密度模型和梅花结构模型等5种不同的氧化铝纳米孔形成机理,最后对氧化铝模板的应用和发展前景提出了展望.     

Transient pressure analysis for the reactor core and containment of a HTGR after a primary loop pressure boundary break accident

The pressure variances in the reactor core and containment of a High Temperature Gas-cooled Reactor (HTGR) after a primary loop pressure boundary break accident determine the structural integrity and safety of the reactor. Based on mass conservation, energy conservation and state equations, explicit formulae for the transient pressure and temperature variances in the pressure vessels were deduced, and a set of differential equations for the transient pressure and temperature variances in the containment were developed. Numerical simulation was also conducted to investigate the transient pressure and temperature variances in the pressure vessels and containment. The results show that energy transformation due to expansion work cannot be neglected. The maximum pressure in the containment could increase by 40 percent due to blockage caused by air in the containment. Detailed numerical simulations of the transient pressure and temperature variance in the reactor core flow passages were also conducted. The results show that the pressures acting on the reactor core and containment are below acceptable values.     

烧结矿竖罐内气固传热过程数值模拟与优化

以某钢铁企业360 m~2烧结机年产390万t烧结矿为研究对象,建立了竖罐内气固传热过程的数学模型,模拟研究了影响竖罐内气固传热过程的主要因素及其影响规律,得到了竖罐适宜的操作参数.研究结果表明:随着气体表观流速的减小和空气进口温度的增加,烧结矿出口温度和空气出口温度均逐渐增加;烧结矿颗粒直径的减小导致烧结矿出口温度的降低和空气出口温度的增加.竖罐适宜的操作参数为:空气进口标况流量45.5万m~3/h,颗粒当量直径0.025 m,空气进口温度130℃.     

求解粘弹性饱和土隧道频域响应的DQEM

用微分求积单元法研究了粘弹性饱和土隧道的频域响应问题.首先,基于饱和多孔介质混合物理论,分别建立了频域内隧道耦合系统中粘弹性饱和土和粘弹性衬砌的控制方程,给出了耦合系统的边界条件以及饱和土和衬砌连接面上满足的连接条件.其次,发展了求解该耦合系统的微分求积单元法,利用微分求积单元法,在频率域内对耦合系统的数学模型进行了离散,并利用Newton-Raphson迭代法得到了系统的数值解.最后,对耦合系统的频域响应进行了分析,考察了参数的影响,同时也验证了数值方法的有效性.