Qα△(T~n)时不可逆卡诺致冷循环工况对其性能的影响

本文在定义致冷循环内不可逆性的基础上,研究了Qα△(T~n)时不可逆卡诺致冷循环工况对其性能的影响,得到了优于已报道的致冷系数与致冷率间的优化关系,讨论表明,这一关系是线性、非线性传热与内可逆及内不可逆多种情况下卡诺致冷循环普遍满足的基本优化公式.     

容县人口现状分析和未来预测

本文首先对容县四十多年来人口的发展变化趋势及现状特点进行分析，然后用自然平均增长法、回归预测法、灰色系统ＧＭ（１．１）模型、中国人口模型及逻吉斯蒂模型等方法对该县未来人口的发展作了预测，经对预测结果进行分析比较，选取了中国人口模型的预测结果．此结果可为容县制定社会经济发展规划，土地利用规划等提供科学依据。     

A new indolic antiauxin, α-(5,7-dichloroindole-3-)isobutyric acid: its chemical synthesis and biological activity

Summary A new potent antiauxin, -(5,7-dichloroindole-3-)isobutyric acid has been synthesized and shown to inhibit auxin-mediated elongation ofAvena coleoptiles and to stimulate root growth of rice seedlings. Its activity is stronger than -(p-chlorophenoxy)isobutyric acid and is comparable to that of 2,3,5-triiodobenzoic acid, which are typical antiauxins.     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

城市化途径及其相关

对城市化途径有关各要素作了综合的叙述,并且指出研究的手段──自人口的聚集至城镇形成发展这一历史的纵剖面及地域、产业结构等横向有关要素作整体系统的分析与比较,并指出应重点研究人口指标分析、产业可比关系、城市化和城市化设施,以及城市体系的研究问题。     

华佗再造丸治疗脑血管病疗效评估

用华佗再造丸治疗脑血栓、脑出血及其后遗症52例,其有效率达90.5％,对照组20例,10例脑出血用20％Mannitol及止血剂治疗,10例脑血栓用低分子右旋糖酐及脑络通治疗,有效率为70％,有高度显著性差异,P<0.001,笔者认为该药是治疗脑血管病较理想的中成药,具有镇静神经,滋阴强心,舒经活络,活血化瘀等作用。对病程短的年纪青的病人的疗效更为显著,脑出血性与脑缺血性疾病均有疗效,正是中药一药多用、一药多治的微妙体现。推测对脑血管病后遗症有效可能与该药能促进神经再生因子(NGF)的合成和利用有关。     

Proopiomelanocortin expression in the skin during induced hair growth in mice

We demonstrate for the first time a hair cycle-dependent gene and protein expression of proopiomelanocortin in mouse skin in vivo. Northern blot detected POMC mRNA with an apparent size of 0.9 kb in anagen but not telogen skin. Western blot emphasized a specific protein of 30–33 kDa recognized by anti -endorphin in late but not early anagen or telogen skin. By immunocytochemistry, -endorphin antigen was localized in the sebaceous gland in a hair cycle dependent manner.     

Purification of platelet-derived endothelial cell growth inhibitor and its characterization as transforming growth factor-β type 1

In 1986, Brown and Clemmons (Proc. natl Acad. Sci. USA83 (1986) 3321) showed that platelets contain a substance, platelet-derived growth inhibitor (PDGI), that inhibits in vitro endothelial cell replication. Although platelets are rich in transforming grwoth factor (TGF-), PDGI was considered not to be related to TGF-, on the basis of its reported properties (extraction from platelets at neutral pH, binding to heparin-Sepharose). However, we purified PDGI to near homogeneity and showed that on the basis of HPLC retention behavior, in vitro growth inhibitory activities with several cell types, receptor binding, and immunoneutralization of growth inhibitory activity with specific anti-TGF- type 1 antibodies, PDGI is most probably identical with TGF- type 1.     

能耗率极值原理和重力理论交互作用下粗质颗粒的浓度垂线分布

本文同时运用能耗率极值原理和重力理论研究了固液两相流在粗质颗粒时固相浓度的垂线分布,通过探讨能耗率极值原理对“非单向性”作用问题,进一步揭示了两相流运动的机理。计算结果与实测数据有较好的吻合。其研究方法、原理、步骤也极易推广到其它各种粒径的固相。     

钢坯磨削温度的若干试验研究

通过使用“可磨式”人工热电偶进行的不同条件下的磨削温度测量试验研究了钢坯磨削工件表层温度,结果表明钢坯被磨削表层温度分布与热强呈三角形分布时的理论分析结果相同,表层峰值温度随磨削压力及磨削功率增大而提高,且随工件进给速度提高而略有降低,峰值温度还随磨削角度减小而提高,90°磨削的峰值温度比0°磨削要低250℃左右,砂轮种类也对峰值温度有重要影响,使用锆刚玉砂轮时磨削温度低于棕刚玉砂轮,试验结果表明高效钢坯磨削的磨削区温度远比普通磨削为高,可达1200℃左右,还从不同方面探讨了磨削高温对钢坯磨削的影响,认为尽管磨削高温有若干不利影响,但对高效钢坯磨削却是重要条件,上述讨论,从一个方面揭示了钢坯磨削机理,并验证了关于钢坯磨削温度的理论分析结果。