Study on the Ion Association in PVdF-based Gel Polymer Electrolyte

IntroductionGel polymer electrolytes were originally described byFeuillade and Perche[1]and further characterized byAbraham and Alamgir[2 ,3], and formed by trapping liquidorganic solutions in a polymer matrix. Compared with solidpolymer electrolytes , gel polymer electrolytes can contactwith electrode tightly and have a room temperatureconductivity of above 10-3S·cm-1,so they are of practicalinterest for the development of new-design,advancedlithiumbatteries . A variety of polymers as poly…     

Gelation Behavior of Poly （Vinylidene Fluoride ）-based Gel Polymer Electrolyte

Poly （ vinylidene fluoride ） （ PVdF ）-based gel polymer electrolytes with various compositions were prepared by solution casting technique, The kinetics of gelation was analyzed via the correlation between the apparent gelation rate and concentration of PVdF at a given temperature, Combination the results of the kinetics of gelation and the DSC study, it revealed that the phase separation was the major behavior and the fibrils were the major junction joints of the three-dimensional network even in the case the concentration of PVdF was higher than 25 wt%. The porous surface observed by ESEM also reflected that the phase separation took place during the gelation.     

二氢杨梅素印迹聚合物的表面行为

应用前沿分析技术测定了二氢杨梅素印迹聚合物块的实验吸附等温线，并用Langmuir方程、Bi-Langmuir方程和Freundlich方程进行拟合，从最佳拟合求得了印迹聚合物的表面位点分布、吸附常数和饱和吸附量.测定了不同温度和不同流动相组成时分子印迹聚合物固定相的吸附等温线.结果表明：双朗格缪尔模型和福伦登里西模型均能给出较好的拟合效果.当20 ℃、四氢呋喃为流动相时，从Bi-Langmuir方程的最佳拟合参数得到第1类键合位点的键合常数和饱和吸附量分别为0.39 mL·mg^-1和133.23 mg·mL^-1，第2类键合位点的键合常数和饱和吸附量分别是135.07 mL·mg^-1和0.071 mg·mL^-1.     

The glass transition temperature and microstructure of polyurethane/epoxy resin interpenetrating polymer networks nanocomposites

GLASS TRANSITION TEMPERATURE (TG) HAS BEEN EXTEN- SIVELY STUDIED FOR MANY POLYMERS SINCE IT IS ONE OF THE MOST FUNDAMENTAL FEATURES RELATIVE DIRECTLY TO POLYMER PROPERTIES. IN GENERAL, INORGANIC NANOFILLERS DO NOT DI- RECTLY CONTRIBUTE TO THE TG OF THE MA…     

Efficient polymer light-emitting diodes with violet blue emission based on blends of PSiF6-PPP and PSiFC6C6

Efficient polymer light-emitting diodes (PLEDs) with violet blue emission were fabricated using blends of copolymers of paraphenylene-co-silafluorene (PSiF6-PPP) and polymer of poly (9,9'-alkyl-3,6-silafluorene) (PSiFC6C6). The performances of the devices are sensitive to the blend ratio. When the mass ratio of PSiF6-PPP to PSiFC6C6 is 1 : 3, the highest external quantum efficiency is 1.96% at luminance of 105 cd.m2, its electroluminescent (EL) spectrum peaks at 398 nm and full width at half maximum is 67 nm. The improvements of the device performances were due to the energy transfer from PSiFC6C6 to PSiF6-PPP and the balanced injection of electrons and holes.     

锂电池复合型聚合物电解质材料研究进展

综述了近年来国内外在锂离子电池复合型固态聚合物电解质和复合型凝胶聚合物电解质材料的研究进展。     

19GeV/c能量下质子-铍碰撞中领头奇异超子Λ的产生

利用在美国布鲁克海汶国家实验室的环型加速器(Brookhaven/AGS)上进行的19.6 GeV质子轰击固定铍核的实验数据,通过质子与π介子对的搭配,并用一种新的循环迭代的混合事件方法,从复杂的背景中,提炼出共振态领头粒子Λ的产生.     

锂离子电池用无纺布支撑聚合物复合膜的制备

采用γ射线辐射接枝的方法在无纺布纤维表面接枝苯乙烯。将接枝改性后的无纺布浸渍于丁酮/PVDF-HFP/丁醇混合液中,真空干燥后制得多孔的无纺布支撑聚合物电解质复合膜。以其为隔膜组装了聚合物锂离子电池(LiMn2O4/无纺布聚合物复合膜/Li),进行充放电测试。研究结果表明,无纺布聚合物复合膜具有合适的厚度,一定的机械强度。辐射接枝提高了无纺布与聚合物混合液的结合力,在电池的充放电循环过程中不易发生短路,电池的容量和循环性能得到显著提高。     

电磁场中带电粒子的几种运动方程

系统地介绍了低速带电粒子在电磁场中的运动规律.分析对此问题的解决方法,目的是加深对此内容的理解.     

C/GFRP加固混凝土梁受弯性能试验研究

通过三根采用不同纤维(CFRP、C／GFRP和GFRP)正截面加固的混凝土梁和一根对比梁的受弯破坏实验，对比研究了C／GFRP层间混杂形式纤维加固梁的受力特点、破坏形态、合理加固方式、梁体应交情况、承载能力、刚度和变形能力，试验结果表明：采用C／GFRP层间混杂形式纤维加固梁在受弯承载力显著提高的前提下表现出了较好的廷性，这种加固技术切实可行，并可以降低工程造价。