一种玻璃钢移动门承载性能有限元分析

应用有限元方法模拟研究了一种洞库工程口部伪装用玻璃钢框架结构在荷栽作用下的应力分布和变形，校核强度和刚度是否满足使用的要求．计算结果表明，移动门斜面（倾角≤60°）上布置4个储水式植物箱（单个重100kg）和36个植草式植物箱（自重加10cm厚土层重量）、正面分压1640N／m2的条件下，框架结构各杆件、植草箱和储水式植物箱的应力小于其强度值，结构稳定．研究结果表明，该型移动门能够用于沿海地区洞库工程口部伪装工程结构．     

INVESTIGATION ON A FLOWRATE MEASURING SYSTEM USING LIGHT FIBRE FLUOROMETERS

In this paper a flowrate measurement method in pipe directly using light fibres with some fluorescent tracer is proposed. This method will work better than traditional tracers measurement such as using radioactive or salt tracers. It is shown that the flowrate signals are sensitive and intensive also if the injected tracer volume is very small and if the tracer concentration is very lew (<10ppm) ico. It is also show that the calibration factor K is constant within a certain flowrate range. An estimation of uncertainty of flowrate measurement is given, which shows that the measuring accuracy can be within ±2%.     

STUDY ON MECHANISM OF FIBRE DEPOSITION IN OE FRICTION SPINNING

This paper deals with the mechanism of fibre deposition in OE friction spinning.A fibremodel has been established to analize and evaluate fibre.straightness after deposition.Exper-iments have been done on the measurement of air flow speed at the entrance and exit of thefeed duct which is mounted in an experimental friction spinning unit.Conclusion has beendrawn:the weakness of friction spun yarn is mainly due to its poor fibre straigthness after dep-osition.     

A STUDY OF THE IMPOVEMENT OF TENACITY OF POLYACRYLONITRILE PREOXIDED FIBRE BY USING CUPROUS SALT

Polyacrylonitrile preoxided fibre PANOF is an intermediate in carbon fibre preparation. Thequality of PANOF is closely related to the property and structure of carbon fibre. In this paper, thermal mechanical analysis(TMA), thermogravimetric analysis(TGA), swell-ing differential scanning calorimetry(SDSC)and X-ray photoelectron spectroscopy(XPS)wereused to study the increase in tenacity of PANOF from the precursor treated with cuprous salt It has been discovered that the cuprous salt reacts strongly with the uncyclized CN of PANOF,resulting in an increase in the tenacity of PANOF by 30%. The results shwo that the cause of thistenacity improvement is the formation of coordinated complex. Cu~+is the central ion, and PANOFthe ligand. It is due to the coordinate bond that the network structure is formed from uncyclizedCN of PANOF. Therefore the tenacity of PANOF is remarkably increased.     

PET纤维结晶度和晶粒大小的研究

大角X射线衍射法估算纤维的结晶度和晶粒表现尺寸时,一般采用的方法是把归一化的衍射强度曲线分解为一个以多项式表示的非晶部分散射曲线及几个以高斯函数和柯西函数组合起来表示的结晶峰;分峰之后,试样的结晶度一般用峰面积结晶度即解析峰下面经归一化的散射对未经解析而归一化的曲线下的总散射的面积比率求得.结晶表现尺寸从相应的结晶峰半高宽求得.但上述的分峰方法得不到分峰结果的唯一解.本研究工作采纳前人提出的PET结晶样品X射线衍射强度曲线所包含的非晶部分曲线的一系列理论和经验的假设,作为物理制约条件,进而与数学上的满足条件相结合,在进行分峰时,可以解出数学上符合δ<3%的精度、物理意义上符合客观存在的解.并通过对PET纤维的研究,对上述方法作了证实.     

铜盐对聚丙烯腈预氧化纤维增强作用的研究

聚丙烯腈预氧化纤维(以下简称PANOF)是碳纤维生产过程中的中间产品,其性能的好坏与最终产品碳纤维的优劣密切相关。本文采用热机械分折(TMA)、热失重分折(TGA)、溶胀差示扫描量热分折(SDSC)、X光电子能谱分折(XPS)等实验方法研究了铜盐对PANOF的增强作用。发现Cu~+与PANOF中未环化的氰基有着强烈的相互作用。经铜盐处理后所制得的PANOF,其强度可增加30％。研究结果表明,PANOF得以增强的原因是由于发生了以Cu~+为中心离子,PANOF作为配位体的络合作用。络合配位键的生成使未环化的氰基得以交联,交联网络的形成使PANOF的强度明显提高。     

用棉油酸甲酯合成聚酰胺树脂的研究

本文研究了由棉籽油经甲醇解得到棉油酸甲酯,继而进行二聚,再与乙二胺缩聚合成聚酰胺树脂的方法.     

细丝开清工艺参数与工艺效果的试验

本文通过考查紬丝纺开清机械的若干工艺参数,对除杂效率和提高吹净绵的质量作了某些探讨,通过比较有系统的试验和数据分析,得出了较优的工艺参数,它对今后提高细丝质量具有一定的参考和使用价值。     

光纤圆度仪的研究

本文提出一种将反射式光纤微位移传感器用于圆度测量的方法。结合一参考光路,并利用微机进行数据采集和信号处理,这种传感器易受待测体材料类型和表面粗糙度的影响可被消除。