锤击沉管灌注桩施工时应注意的几个问题

锤击沉管灌注桩应用非常广泛.从桩位的确定、沉管深度、混凝土质量、钢筋笼振入长度、桩身混凝土凿除等几个方面,提出了提高锤击管灌注桩施工质量的一些建议.     

实现细粒煤深度脱硫产业化的研究

根据我国高硫煤的赋存特点,提出采用微细介质重介旋流器及细泥选择性絮凝组合工艺实现细粒煤的深度脱硫,无机硫脱除率可大幅度提高,分选下限明显降低,是实现煤炭深度脱硫降灰产业化的有效技术途径.     

多类别软件引导程序

采用快速ＢＡＳＩＣ及其工具库编写一个用途广泛的引导程序，它具有将各类不同程序的运行或变换溶为一体对用户十分友好的界面，在计算化学和计算机文献检索中得到实际应用．     

草酸生产水洗塔设计

对目前国内合成法生产草酸所用水洗塔,采用加大水量到50m~3/h,提高塔板开孔率到19.55%(一般推荐6%～12%),降低溢流堰高为25mm,增大降液管到下层塔板间距为95mm 的办法,使洗涤后的气体达到要求。     

全息正弦式波带片特性研究

本文主要对全息正弦式波带片的形成及成像特性进行了详细的理论分析，并把它与传统的菲氏波带片及几何光学透镜作比较研究，从中获得正弦式波带片的焦距公式；ｆ＝λ１α／λ２。     

高压CMOS管工艺的设计、模拟和验证

模拟和验证了一种低成本的，以标准CMOS工艺为基础，无需对原工艺流程进行改动的高压工艺技术。讨论了低压器件中的各种击穿机理，相应提出了高压器件中所做出的改进，列举了该工艺技术中所用的特殊版图；对此工艺的应用性进行了二维的工艺和器件模拟；将模拟结果与实际测试结果进行了比较，验证了这种高压工艺技术的实用性。     

中厚板矫直技术发展的现状与展望

介绍了国内外矫直技术与矫直设备的发展水平与方向 ,在简要介绍中厚板矫直机理的基础上 ,指出了目前我国中厚板矫直技术存在的一些差距与不足 ,为我国中厚板矫直设备的改造提供了一定的参考依据。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

介观耗散互感耦合电路的库仑阻塞效应

给出了介观耗散互感耦合电路的量子化方法,并在介观电路中电荷量子化的基础上给出了介观耗散互感耦合电路的库仑阻塞条件.     

用测量模态阻尼和振型的方法对复合材料薄平板进行无损质量检测

复合材料薄平板经热压制成后,都需要进行质量检测。本文探索用测量模态阻尼和振型的方法,对复合材料薄平板的制作质量进行无损检测,作为对其它昂贵的无损检测方法的补充。略述用振动方法进行无损检测的原理,测量薄平板阻尼的方法以及提高测量精度的措施。还讨论在测量薄平板阻尼时可能遇到的一些特殊问题(如非线性刚度、拍、模态密集等问题);以云母基复合材料薄平板作为例子,从测量其阻尼和振型的结果,对这种板的制作质量进行讨论。