较低温固体电解质催化氧传感器的研究

制备了不同的固体电解质，测量电极和参比电极，利用应答实验研究了固体电解质，测量电极对氧传感器的影响，利用恒电流实验选择了合适的参比电极，并研究了程度，氧浓度对电池应答的影响，考察了其稳定性，并进一步进行了阴极极化和阳极极化的研究。     

Comparison of reduction disintegration characteristics of TiO2-rich burdens prepared with sintering process and composite agglomeration process

To reveal the impact of the composite agglomeration process (CAP) on the reduction disintegration properties of TiO2-rich iron-making burden for a blast furnace, the reduction disintegration indices (RDIs), mineral constituents, and microstructure of the products pre-pared by the CAP and the traditional sintering process (TSP) were investigated. The results showed that, compared to the sinter with a ba-sicity of 2.0 prepared by the TSP, the RDI+6.3 and the RDI+3.15 of the CAP product with the same basicity increased by 28.2wt%and 13.7wt%, respectively, whereas the RDI?0.5 decreased by 2.7wt%. The analysis of the mineral constituents and microstructure of the products indicated that the decreasing titanohematite content decreased the volume expansion during reduction. Meanwhile, the decreasing perovskite content decreased its detrimental effect on the reduction disintegration properties. In addition, the higher silicoferrite of calcium and aluminum (SFCA) content improved the strength of the CAP product. Together, these factors result in an improvement of the RDI of the CAP products. In addition, compared to the sinter, the reduced CAP products clearly contained fewer cracks, which also led to mitigation of reduction disintegration.     

快淬对贮氢合金组织和电化学性能的影响

通过XRD、TEM、DTA分析和电化学实验 ,研究了快淬对贮氢合金组织和电化学性能的影响。研究表明 ,成分均匀性改善和单胞体积减小是影响快淬贮氢合金电化学性能的主要因素 ,其中 ,前者使充放电循环稳定性提高 ,后者使放电容量降低。在本研究中 ,快淬速度为 10m/s时 ,合金成分的均匀性已较铸态有明显改善 ,更高的快淬速度并不能使成分的均匀性进一步大幅度提高 ,反而使单胞体积减小 ,因此 ,快淬速度为 10m/s时 ,快淬合金的综合电化学性能最佳。     

线切割机床工具电极的可靠性建模与评估

电火花线切割机床将金属丝作为切割工具,亦称工具电极,而断丝是线切割机床最频繁的故障模式.为提高加工过程的可靠性,进而提高生产效率,需要对工具进行可靠性建模与评估.将两次断丝故障之间的工作时长(即断丝间隔时间TBB,Time between Breakings)作为可靠性数据,并假设数据服从两参数Weibull分布;基于数据和最小二乘法,得到了Weibull分布参数估计值;进行假设检验.结果表明:两参数Weibull分布可用于工具电极的可靠性模型.结合实例,求出某电火花线切割机床的平均断丝间隔时间MTBB(Mean time between Breakings),并将其作为可靠性指标,基于该指标提出建议,以提高加工过程的可靠性.     

还原剂对高磷鲕状赤铁矿还原焙烧铁磷分离的影响

研究还原剂种类及用量对高磷鲕状赤铁矿还原焙烧铁磷分离的影响.添加脱磷剂Na2CO3,在提铁降磷的同时能降低还原铁的硫含量;还原剂用量的增加都能促进铁还原,但使用灰分和固定碳含量较高或挥发分含量较低的还原剂时,不利于降磷.焙烧产物的X射线衍射分析表明:添加脱磷剂Na2CO3时,随着还原剂用量的增加,焙烧产物中金属铁含量增加,浮氏体和石英含量降低;使用灰分含量较高的还原剂时,随其用量的增加,灰分会消耗Na2 CO3,从而减弱其对于铁还原的促进作用;还原剂用量相同时,石煤、烟煤、焦炭和褐煤所得焙烧产物中金属铁含量逐渐增加,浮氏体含量逐渐降低.总体来看,褐煤作为还原剂时铁磷分离效果最好,其次为烟煤,焦炭和石煤.     

Metallogenic epoch and genesis of the gold deposits in Jiaodong Peninsula, Eastern China: a regional review

Gold deposits are characterized by multi-sources, superimposition, large scale and temporal-spatial concentration in Jiaodong Peninsula, Eastern China. In this paper, we review the history and the development of the study on metallogenic chronology and genesis of gold deposits, summarize the main features of superimposed metallogenesis, provide evidence of the Mesozoic complex metallogenic system, and point out some problems for further research of Jiaodong gold deposit cluster from a regional view. Although gold deposits are different in genetic types, ore-forming materials and geological settings, our research indicates that the accumulation and emplacement of the ore-forming materials are temporally-spatially concentrated on a large scale, and the main metallogenic epoch of Jiaodong gold deposits was concentrated in Mesozoic. Metallogenic chronology and geological-geochemical data indicate that there are two periods of gold mineralizations occurred in 130-110 Ma and 90-80 Ma respectively in Jiaodong ore cluster. The gold deposit cluster results from the superimposition of the polygenetic mineralization, and further study is needed to investigate the formation and evolution of the Mesozoic complex metallogenic system.     

纳米金修饰硅纳米线电极阳极溶出法测定痕量铅、铜

以浸入沉积的方法在硅纳米线上修饰了金纳米颗粒,并通过电子扫描显微镜（SEM）和X射线荧光分析（XRF）对金纳米粒子修饰的硅纳米线电极表面形貌进行了表征.以修饰后的硅纳米线电极作为工作电极,采用阳极溶出法检测水中痕量铅和铜,考察pH值、富集电位和富集时间对溶出峰的影响,优化出最佳实验条件.在优化的实验条件下,铅Pb2＋和铜Cu2＋的灵敏度分别为0.649μA/（μg.L-1）和0.177μA/（μg.L-1）.检测极限达到0.26μg.L-1和0.67μg.L-1.峰电流与离子浓度在质量浓度25~200μg.L-1的范围内形成良好的线性关系.     

交叉平面电阻抗成像模型分析

该研究针对传统平面电极阵列电阻抗成像系统问题,构建了一个交叉平面电极阵列的电阻抗断层成像系统。此系统由65个电极组成4个水平和8个轴向相交叉的成像空间。仿真及水槽实验采用了Tikhonov正则化算法,重建结果与原物体的比较表明,该成像方式在空间中能够提供更高的分辨率和定位精度。此外,这种方法能有效地减少计算量,在临床检查和监护上显示出很大的应用前景。     

含邻苯二酚基团N-炔丙基酰胺螺旋聚合物对金属离子的吸附研究

设计合成了一类侧链上含有邻苯二酚基团的N-炔丙基酰胺螺旋聚合物,研究了其对水溶液中的Fe(Ⅲ), Ni(Ⅱ)和Cu(Ⅱ) 3种金属离子的吸附行为。结果表明,两种金属离子共存时存在竞争吸附,三者的竞争吸附关系为Fe(Ⅲ)＞Cu(Ⅱ)＞Ni(Ⅱ);共聚物吸附Fe(Ⅲ)的动力学过程可用准一级动力学模型来描述;吸附后所形成的Fe(Ⅲ)络合物中,聚合物的二级结构随Fe(Ⅲ)的吸附量变化而变化,两者之间存在定性关系。     

A study on nano-sized NiO electrodes doping with C and Co prepared by electrochemical deposition-sintering processes and their capacitance performance

In the present work, it was studied that nanoosized NiO electrodes doping with C and Co were prepared by electrochemical deposition in an ethanol solution containing nickel nitrate and cobalt nitrate and sintering processes. The capacitance performance of such electrodes was also studied. The results reveal that samples obtained by electrochemical deposition first on a porous nickel cathode in an ethanol solution contain 0.5 mol/L nitrates, in which Ni(NO3)2 and Co(NO3)2 were mixed in a molar proportion of 8 : 2. After sintering at 300℃ for 2 h, they exhibited the best performance. XRD analysis illustrates that the essential phase of the product is NiO doping with certain content of C and Co. The particles of product imaged a spherical morphology with sizes of 20---30 nm in diameter, and with an average crystal size of 4--5 nm. The capacitance measurement of the simulating C/NiO capacitors indicates that a single electrode can reach as high as 410.0 F/g, and still maintain the value of 323 F/g after 30 recycles showed as a stabilized value with increasing recycles, when it was discharged at a current of 5 mA.