基于距离分类准则的雷达目标识别方法

雷达目标信号是非平稳信号，对于这样的非平稳信号，用于分类的特征往往包含在局部的时一频信息中，用一般的变换提取有效的特征比较困难。利用小波包基的性质，提出了一种雷达目标识别方法。首先，对雷达回波信号进行小波分解，利用距离准则，选择最优小波包基，从被识别的信号中提取具有最大可分性的特征，得到目标识别的特征向量，由此进行目标识别。仿真实验结果表明，该方法具有高的识别率。     

A TCAM-based Two-dimensional Prefix Packet Classification Algorithm

Packet classification (PC) has become the main method to support the quality of service and security of network application. And two-dimeusioual prefix packet classification (PPC) is the popular one. This paper analyzes the problem of ruler conflict, and then presents a TCAM-based two-dimensional PPC algorithm. This algorithm makes use of the parallelism of TCAM to lookup the longest prefix in one instruction cycle. Then it uses a memory image and associated data structures to eliminate the conflicts between rulers, and performs a fast two-dimeusional PPC. Compared with other algorithms, this algorithm has the least time complexity and less space complexity.     

基于分布式实时三维仿真系统的设计与实现

讨论了用多台微机代替图形工作站实现分布式实时三维仿真系统的系统框架和相关的问题，分析了多台微机并行同步渲染出整个三维场景时，因为各台机器之间的数据帧包和控制帧包的同步而出现的问题，并针对这些问题提出了如何有效使用广播和UDP包传送数据帧包和控制帧包的解决方案。给出了一个具体的实例——机场塔台仿真系统。     

频率和DOA估计的等价性

定义了频率估计和信号到来角估计的信号模型，介绍了基于小波包理论的频率估计，推导了两者的等价性和分辨率的关系，仿真结果验证了频率和DOA估计的一致性。     

网络包分类算法仿真测试与比较研究

在深入分析基于树结构和计算几何学点定位算法而衍生的主要分类算法原理的基础上 ,建立了算法性能评估仿真测试平台 .平台包括网络流的软件仿真、算法的软件实现和算法性能参数测试统计三个主要部分 .通过对各算法的时间性能和空间性能及其随分类规则数和分类域数的变化趋势的测量 ,从数量上把握各算法的主要特点及其适用性 ,从而可以将各种算法有机地结合在一起胜任速度越来越高的网络应用需求 ,同时也是进一步研究其它算法的基础 .     

闭环网络控制系统全数字仿真实验方法的研究

提出网络控制系统全数字仿真的方法，针对目前Matlab没有提供NCS仿真模块的现状，设计出能够真实再现网络环境的延时模块，并在此基础上开发出一套完整的网络控制仿真实验平台，只需一台计算机就能够完成包括网络数据包丢失和时序错乱等现象在内的各种NCS仿真实验，保证在进行NCS控制算法的比较研究时，网络延时状况是一致的。在该实验平台上进行NCS全数字仿真实验，结果证明以上方法的有效性。     

Packet Queueing Delay in Resilient Packet Ring Network Nodes

The packet queueing delay is one of the most important performance measures of a data network and is also a significant factor to be considered in the scheduling buffer design for a network node. This paper presents a traffic queueing model for resilient packet ring (RPR) networks and a method for quantitatively analyzing queueing delays in RPR nodes. The method was used to calculate the average queueing delays of different priority traffic for different transit queue modes. The simulations show that, in the transmit direction, lower priority traffic is delayed more than higher priority traffic, and that Class-A traffic is delayed more in a single-queue ring than in a dual-queue ring. In the transit direction, the secondary transit buffer in the dual-queue ring contributes more to the traffic delay than the primary transit buffer in the single-queue ring, which in turn causes more delay than the primary transit buffer in the dual-queue ring.     

Ho∞-based fault detection for nonlinear networked systems with random packet dropout and probabilistic interval delay

The fault detection problem for the nonlinear networked control system (NCS) with packet dropout and delay is investigated.A nonlinear stochastic system model is proposed to account for the NCS with random packet dropout and networkinduced non-uniformly distributed time-varying delay in both from sensor to controller (S/C) and from controller to actuator (C/A).Based on the obtained NCS model,employing an observer-based fault detection filter as the residual generator,the addressed fault detection problem is converted into an auxiliary nonlinear H∞ control problem.Then,with the help of Lyapunov functional approach,a sufficient condition for the desired fault detection filter is constructed in terms of certain linear matrix inequalities,which depend on not only the delay interval but also the delay interval occurrence rate and successful packet communication rate.Especially,a trade-off phenomenon between the maximum allowable delay bound and successful data packet transmission rate is found,which is typically resulted from the limited bandwidth of communication networks.The effectiveness of the proposed method is demonstrated by a simulation example.     

H_∞-based fault detection for nonlinear networked systems with random packet dropout and probabilistic interval delay

The fault detection problem for the nonlinear networked control system(NCS) with packet dropout and delay is investigated.A nonlinear stochastic system model is proposed to account for the NCS with random packet dropout and networkinduced non-uniformly distributed time-varying delay in both from sensor to controller(S/C) and from controller to actuator(C/A).Based on the obtained NCS model,employing an observer-based fault detection filter as the residual generator,the addressed fault detection problem is converted into an auxiliary nonlinear H∞ control problem.Then,with the help of Lyapunov functional approach,a sufficient condition for the desired fault detection filter is constructed in terms of certain linear matrix inequalities,which depend on not only the delay interval but also the delay interval occurrence rate and successful packet communication rate.Especially,a trade-off phenomenon between the maximum allowable delay bound and successful data packet transmission rate is found,which is typically resulted from the limited bandwidth of communication networks.The effectiveness of the proposed method is demonstrated by a simulation example.     

全光纤安防系统模式识别混合编程的实现

介绍了宽域全光纤监控预警系统及光纤扰动信号模式识别算法.利用小波包分解对信号进行分解与重构,并提取各频段内信号分量能量谱作为特征向量;应用综合考虑观测数据和确定性先验知识的BVC-RBF神经网络实现信号分类,提高了网络的泛化能力.利用Matlab引擎、动态链接库(DLL)、组件对象模型(COM)3种混合编程方法将Mat...