森林面积分布系统的最优控制存在性问题

本文研究森林面积分布系统的最优控制问题。本文将林木总和长消率作为控制变量，以“范数最小”来衡量其最优性，利用空间Ｌ＾２（０，Ｔ）Ｔ〉０的自反、光滑和严格凸性，给出了森林面积分布系统最优控制的一个存在性定理。     

Qα△(T~n)时不可逆卡诺致冷循环工况对其性能的影响

本文在定义致冷循环内不可逆性的基础上,研究了Qα△(T~n)时不可逆卡诺致冷循环工况对其性能的影响,得到了优于已报道的致冷系数与致冷率间的优化关系,讨论表明,这一关系是线性、非线性传热与内可逆及内不可逆多种情况下卡诺致冷循环普遍满足的基本优化公式.     

高频MOS－CV特性的界面态形变及其测量

讨论了工艺过程中产生的界面态陷阱电荷Ｑ（ｉｔ）对高频ＭＯＳ－ＣＶ特性线的形变规律，提出了一种沿电压方向形变的数据处理方法，以此算出Ｑ（ｉｔ）密度在禁带中的分布，并对常规高频ＣＶ法的测量误差作了讨论和修正，由于数据的采集和处理可以由微机完成，使这种方法变得简便、准确并易于在工艺线上推广使用。     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

轮式分页输纸中的摩擦问题

本文着重研究了输纸轮与纸面间以及纸与纸间的静、动摩擦特性。分析了分页输纸的力学条件,并通过各种结构输纸胶轮和国产纸张的实验证明了正压力与摩擦系数之间存在着非线性关系。得出了一系列曲线。指出:利用非线性摩擦特性是分页输纸的理论基础,为设计简单的张簧式给纸盒提供了科学依据。经“OA”设备的OCR和OMR使用证明分页输纸稳定可靠。     

也谈“用惠斯通电桥测电阻”实验

本文主要对杨介信、陈国英编写《普通物理实验(二、电磁学部分)》“用惠斯通电桥测电阻”实验中δR_(x0)=(R_4/R_3)δR_2的含意等五个问题,提出自己的不同看法。     

能耗率极值原理和重力理论交互作用下粗质颗粒的浓度垂线分布

本文同时运用能耗率极值原理和重力理论研究了固液两相流在粗质颗粒时固相浓度的垂线分布,通过探讨能耗率极值原理对“非单向性”作用问题,进一步揭示了两相流运动的机理。计算结果与实测数据有较好的吻合。其研究方法、原理、步骤也极易推广到其它各种粒径的固相。     

Loss of antibody production accompanied by chromosome loss in a cloned hybrid line secreting antibodies to sheep red blood cells

Summary Somatic cell hybrids between Sp2/O-Ag14 mouse myeloma cells and lymphocytes derived from BALB/c mice hyperimmunized with sheep red blood cells (SRBC) were produced. One hybrid producing IgG₁ antibody to SRBC was selected, cloned twice and subsequently transferred to BALB/c mice. After a number of transfers it was found that the antibody titer in ascitec fluid gradually decreased. Cytogenetic analysis revealed gradual chromosome loss in the hybrid clone, which produced progressively less antibody.     

钢坯磨削温度的若干试验研究

通过使用“可磨式”人工热电偶进行的不同条件下的磨削温度测量试验研究了钢坯磨削工件表层温度,结果表明钢坯被磨削表层温度分布与热强呈三角形分布时的理论分析结果相同,表层峰值温度随磨削压力及磨削功率增大而提高,且随工件进给速度提高而略有降低,峰值温度还随磨削角度减小而提高,90°磨削的峰值温度比0°磨削要低250℃左右,砂轮种类也对峰值温度有重要影响,使用锆刚玉砂轮时磨削温度低于棕刚玉砂轮,试验结果表明高效钢坯磨削的磨削区温度远比普通磨削为高,可达1200℃左右,还从不同方面探讨了磨削高温对钢坯磨削的影响,认为尽管磨削高温有若干不利影响,但对高效钢坯磨削却是重要条件,上述讨论,从一个方面揭示了钢坯磨削机理,并验证了关于钢坯磨削温度的理论分析结果。     

Juvenile hormone titre and regulation in the cockroachDiploptera punctata

Summary Titres of juvenile hormone (JH) have been determined in both hemolymph and whole body extracts of femaleDiploptera punctata during the first gonotrophic cycle using a method employing gas chromatography/mass spectrometry for qualitative and quantitative analysis. JH III is the sole JH found in both adult and last instarD. punctata. Maximum values of 1500 ng/ml (6M) were observed at the middle of the gonotrophic cycle, when basal oocyte growth rate was greatest. Changes in rates of JH release in vitro by corpora allata paralleled closely the changes in JH titre, suggesting that biosynthesis is a major regulator of titre. JH levels per animal were calculated from observed JH titres, and at certain time points in the gonotrophic cycle JH levels obtained from analysis of whole bodies were significantly greater than those predicted from hemolymph titres. These results suggest the existence of a nonhemolymph JH pool inD. punctata. Decay in JH titre after allatectomy of 5 day females has also been studied. Following a rapid initial decline, the rate of decay slowed appreciably 4 h post-operation. Thus, use of a first-order rate constant to estimate half-life of JH significantly underestimated the longevity of the hormone. The apparent persistence of JH following allatectomy may be due to the existence of a nonhemolymph JH pool.