新型纳米纤维膜对地下水中重金属的过滤去除研究

采用扫描电镜表征了氯化聚氯乙烯静电纺丝纳米纤维膜的微观结构特征,并进行了去除地下水中铜、铅、镉等重金属阳离子的过滤试验,包括直接过滤、加土壤过滤、加硅藻土过滤和胶束强化过滤。结果表明,最佳的过滤工艺是胶束强化过滤,其最佳试验条件是10层膜过滤和5mmol/L的SDBS浓度,对铜、铅、镉的去除率分别超过73%,82%和91%。     

用超滤法处理回用生活污水

研究了用超滤法处理山西铝厂生活污水站出水的阻力特性及清洗可恢复性,通过试验对比了颗粒活性炭、微滤 颗粒活性炭和混凝进行处理污水后的超滤效果.试验结果表明,污水经微滤 颗粒活性炭预处理后,可以得到较好的过滤效果,过滤阻力低;用质量浓度为500mg/L的NaClO溶液反洗浸泡后可以得到较好的清洗效果;混凝可以去除悬浮物、胶体及污水中的部分有机物,明显降低了膜过滤阻力;超滤的产水水质符合生活杂用水标准GB JXX—2001的要求.     

乳化液膜法净化湿法磷酸除镁研究

采用乳化液膜技术对湿法磷酸进行脱镁净化是一种净化湿法磷酸的新途径。采用正交试验设计方法组织实验，结果表明在实验研究范围内，萃取剂对湿法磷酸中脱镁效果有高度显著的影响，而表面活性剂、膜试剂和反萃取剂对镁的脱除有一定影响。     

Growth hormone signal transduction

Growth hormone (GH) promotes animal growth by stimulating bone and cartilage cell proliferation, and influences carbohydrate and lipid metabolism. Some of these effects are brought about indirectly via somatomedin induction in hepatocytes, others by acting directly on the target cells. In either case, GH first binds to specific receptors on cells to trigger a sequence of biochemical events culminating in a biological response. Recently much has been learnt about the molecular structure of GH receptor, its binding to ligand, and the ensuing signal transduction events.     

High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts

High speed machining (HSM) technology is one of important aspects of advanced manufacturing technology. Nickel-based superalloys have been widely used in the aircraft and nuclear industry due to their exceptional thermal resistance and the ability to retain mechanical properties at elevated temperatures of service environment over 700 ℃. However, they are classified as difficult-to-cut materials due to their high shear strength, work hardening tendency, highly abrasive carbide particles in the microstructur...     

双金属氧化物和氧化物载体组分间的相互作用

讨论了一些过渡金属氧化物（NiO,CuO或MoO3)在经改性所得复合载体（TiO2-γ-Al2O3，MoO3-t-ZrO2或NiO-t-ZrO2)上的分散作用，这些三地体系中实验测定的氧化物分散容量与研究负载型二元氧化物体系所得嵌入模型的估算值基本相符；样品的表面组成、结构和性能与载体的表面结构、过渡金属氧化物的负载量和加料顺序以及焙烧温度密切相关。     

A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The rad...     

负载型金属氧化物常温精脱硫剂的制备与表征

以γ—Al2O3为载体，用浸渍沉淀法制备复合金属氧化物脱硫剂，添加竞争吸附剂得到高分散、均匀型金属氧化物精脱硫剂。常温、缺氧条件下精脱H2S穿透硫容可达16．8％．采用EP、TEM技术分析了金属氧化物活性组分的均匀分布及脱硫前后的脱硫剂微表面的变化。     

Finesse 全瓷冠适合性的体外实验研究

目的 :测量Finesse全瓷冠的边缘浮出量及粘固剂的厚度 ,并与金属全冠及金瓷全冠相比较 ,为Finesse全瓷冠的临床应用提供适合性方面的理论依据。方法 :用片切法测量 3组全冠粘固前、后边缘浮出量及粘固剂的厚度。结果 :Finesse全瓷冠粘固前、后的边缘浮出量分别为 (37 6 1± 9 13) μm、(6 5 85± 15 11) μm ,粘固剂厚度为 (40 84± 9 73) μm ,与金属全冠及金瓷全冠相比较 ,均无显著性差异 ;3组全冠粘固前和粘固后的边缘浮出量有显著性差异。结论 :Finesse全瓷冠适合性良好 ,完全可为临床应用 ;粘接对全冠修复体的边缘浮出量有影响。