墩高对不对称高墩连续刚构桥力学特性的影响（英文）

对不同墩高下的不对称高墩连续刚构桥成桥阶段进行了力学特性研究,获得了高墩连续刚构桥在不同墩高下的主梁和桥墩的内力、位移变形特性.研究结果表明,桥墩墩高的变化对主梁内力、主梁竖向位移、墩内力、墩横向位移均产生不同程度的影响,其中对跨中主梁竖向位移和墩顶剪力的影响较大,主梁竖向位移随着墩高的增大而增大,最大位移处平均增幅14.3%,墩顶主梁剪力随着墩高的增大而减小,平均变化率37.1%.     

高密度电法在非煤矿山老窑采空区探测中的应用

由于矿山开采存在不明废弃老窑及采空区、老窑采空区资料不详、边界和积水情况不明等问题,矿山生产存在严重安全隐患。本文以湖南冷水江某金属矿山老窑采空区探测为例,采用高密度电法实施了4条物探测量剖面,经数据反演处理解译,共推断出8个采空区异常,其视电阻率特征均为高阻异常,显示其均为非充水采空区,根据已有矿体产出形态,推测采空区体积共约2 484 m³,基本确定了采空区的整体情况。     

超高压高CO2气藏偏差系数图版扩展与应用

Standing-Katz图版法确定天然气偏差系数是目前最常用、最基础的方法之一,但存在人工读值误差大、在超高压（拟对比压力大于15）和高CO₂含量天然气使用受限等问题。设计单组分偏差系数测定实验,结合Standing-Katz图版曲线变化规律,将图版拟对比压力扩展到30,拟对比温度扩展到3.6,并将图版数字化;基于不同CO₂含量偏差系数测定实验结果,推导了考虑不同CO₂含量的天然气拟临界压力、拟临界温度计算新模型,与常规非烃校正模型相比,新模型计算精度更高,适用范围更广。进一步将新临界参数校正模型嵌入到偏差系数扩展图版中,得到不同CO₂含量的偏差系数扩展图版,该图版在南海西部超高温高压、高CO₂含量天然气偏差系数计算中误差较小（不超过3%）,应用效果良好。     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

泥沙输移对长江中游水位抬升的影响

通过对长江干流宜昌至汉口河段及与洞庭湖区泥沙输移变化的综合分析,得到了三口分流分沙逐年减少是造成洞庭湖区淤积速率减小和螺山至汉口河段淤积速率增大的主要原因,也是造成长江干流监利至螺山河段水位逐年抬升、洞庭湖区的洪水调节能力大幅度下降的主要原因等结论．按照因势利导的治理原则,荆江及洞庭湖的近期治理策略应是淤积围垸减少河道淤积、疏浚河道、加固干堤．     

2,3-二羟基哌嗪与几种氨基化合物的缩合反应研究

由乙二胺与乙二醛的缩合物２,３－二羟基哌嗪,分别与甲酰胺、脲和乙二胺反应,制得２,４,７,９,１１,１４－六氮杂三环［８,４,０,０３,８］十四烷六盐酸盐四水合物（１）,２,５,７,９－四氮杂双环［４,３,０］壬－８－酮二盐酸盐－水合物（２）和２,５,７,１０－四氮杂双环［４,４,０］癸烷（３）。化合物１为未见文献报道的新化合物。化合物２的合成工艺条件优化后,反应得率与文献［１］相比有一定提高。化合物３的合成,由于将反应分为低温和高温两个缩合阶段,使反应得率提高到７７．５％。     

解平行四边形板弯曲问题的二元B样条有限元法

将文献［１］以二元二次Ｂ样条函数为基底,求解矩形薄板弯曲问题的二元Ｂ样条有限元的方法推广到用于求解平行四边形板弯曲问题．结果表明：该方法系数矩阵每行的非零元仅２１个,相对于朱明权和ＣｈｕｉＣ．Ｋ．等的张量积型样条有限元方法,计算量与存贮量都大大节约．     

柔性机构动力学分析的有限元件法

对柔性机构动力学进行建模和计算机模拟。方法以组成机构的构件为单元,把构件的刚性运动和弹性变形统一用模态参数表示;以梁单元为代表分析了集中质量及分布质量情况下的梁的惯性特征;引入弹性的概念,     

Cloning, construction of prokaryotic expression vector and expression ofEscherichia coli cytosine deaminase gene

Cytosine deaminase gene ofEscherichia coli strain H-30 was cloned, and its initiation codon of ‘GTG’ was mutated to ‘ATG’ by PCR. Prokaryotic recombinant expression vector pBV220-CD was constructed. Clone with high enzyme activity were selected by detecting their specific activity of cytosine deaminase. 5-FC(5-FC, 5-fluorocytosine) could induce the lethal toxicity to cells containing active CD gene. DNA sequence analysis indicated that there were 16 altered bases and 5 of them resulted in the alteration of amino acids in predicted peptide by comparing DNA sequence of the clone H-30-CD-11 with high enzyme activity with CD gene reported in Gene Bank.     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.