Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

金具零部件表面防腐蚀试验研究

随着经济的持续高速增长，各行业用电需求增大。在加快特高压骨干电网建设的同时，提高现有电网的输电能力、输电质量成为重中之重。金具是海上换流站的重要组成部分，海洋环境的特殊性，对金具提出了更高的耐腐蚀性能要求。为了探究海洋环境对金具的腐蚀性，选用ZL101A和ZL102两种典型的铝合金金具，采用5种辅助防腐蚀工艺获得5种耐腐蚀样本，并模拟海上工况对其分别进行盐雾腐蚀试验，得出最优防腐蚀工艺。研究表明：ZL101A和ZL102两种铝合金具有一定的耐腐蚀性能，ZL101A铝合金的耐腐蚀性能强于ZL102铝合金的；抛丸处理的防腐措施在ZL101A铝合金样本中的防腐蚀表现要强于ZL102铝合金样本的；阳极氧化在两种材质中防腐蚀表现均为优异，是最优异的防腐蚀工艺。     

基于回波预处理和相参积累的C&I干扰抑制算法

C&I(chopping and interleaving)干扰是一种针对线性调频(linear frequency modulation, LFM)雷达的典型干扰样式, 干扰子信号调频斜率与雷达发射信号相同, 利用信号处理工具分离真实回波与干扰信号难度较大。针对该问题, 以LFM相参雷达抗自卫式C&I干扰为背景, 提出基于回波预处理和相参积累的干扰抑制算法。根据估计的回波时延, 设置距离窗截取受干扰回波段, 在此基础上, 通过对回波预处理, 改变不同重复周期内假目标的快时间位置分布, 通过相参积累实现干扰抑制。仿真试验表明, 所提算法能够有效抑制强干扰背景下的C&I干扰, 干扰抑制后真实目标检测概率大幅提高, 虚假目标数量明显减少。     

金属有机框架衍生单原子纳米酶的合成、表征与生物应用研究进展

单原子催化剂（SACs）具有高原子利用效率以及高催化活性，在各种催化体系中均表现出优异的性能.其原子级别的活性位点与天然的金属蛋白酶类似，因此单原子纳米酶（SAzymes）的概念也应运而生.而金属有机框架（MOF）由于其具有高孔隙率的特点，可以作为合成SAzymes的前驱体.该文总结了使用MOF前体/模板构建SACs的合成策略，以及SAzymes的生物应用，提出了基于MOF衍生的SAzymes的发展挑战和前景.     

一种三维DNA构象的交互式参数化模拟方法

提出一种适用于移动平台的交互式参数化DNA三维动态模拟方法.依据不同的DNA模式参数,利用基于自然特征的AR识别技术和曲线,直观形象地展示DNA的多种三维构象,动态模拟碱基互补配对、碱基对边堆叠边螺旋、 DNA复制的边解旋边半保留半不连续复制等微观过程.研发DNA三维动态模拟原型系统,实验结果表明,通过视、听、触、实物等多通道交互,有利于用户随时随地自主使用,增强用户对DNA知识的理解、掌握,引导用户进行更深层次的思考,提高知识的传递效率.     

基于GAN的通信干扰波形生成技术

现有通信干扰方法, 通常基于通信侦察中获取的目标信号特征进行干扰决策, 选取合适的干扰波形实施干扰, 难以应对目标信号特征未知或参数动态变化的情况。为此, 提出一种基于生成对抗网络(generative adversarial networks, GAN)的通信干扰波形生成技术, 运用GAN直接提取目标信号的潜在特征, 并生成与目标信号特征相似的干扰波形。在介绍GAN原理的基础上, 首先设计网络模型, 并对学习率进行优化, 使GAN更适用于时间序列通信干扰波形的生成。然后通过对不同类型和参数的通信信号进行干扰波形生成实验, 验证了该技术的泛化性。最后进行干扰效果对比试验, 结果表明, GAN生成的干扰波形干扰效果能够逼近最佳干扰效果。     

基于数据场联合PRI变换与聚类的雷达信号分选

基于脉冲描述字进行雷达信号分选时,传统聚类算法需要预先人工设定聚类中心和聚类数目。针对该问题,提出一种基于数据场理论联合脉冲重复间隔(pulse repetition interval,PRI)变换与聚类的雷达信号分选新方法。首先,依据数据场理论,基于势值大小实现干扰点剔除,而后利用PRI变换算法进行PRI估计,依据PRI估计值将归一化脉冲描述字数据预分类,进而以各类数据集中心间的欧氏距离小于辐射因子为准则进行类别合并,自动得到初始聚类中心和聚类数目,最后通过改进K-Means算法完成聚类分选。仿真实验表明:所提方法能够应对存在频率捷变,重频参差、抖动、参数交叠、局部脉冲丢失的复杂信号环境,分选正确率明显提升。     

变化海流环境下AUV能量最优三维路径规划

为获取变化海流环境下自主水下航行器(autonomous underwater vehicle, AUV)的能量最优路径, 基于最优控制理论提出一种用于AUV的三维能量最优路径规划算法。首先, 为了有效抑制海流对路径规划的影响, 将海流向量加入到AUV运动学模型中。其次, 在已知俯仰角及AUV位置的情况下, 利用庞特里亚金极小值原理, 获得能量最优控制律。最后, 利用线性定常系统的状态空间理论, 计算得到初始艏向角、航速以及能量消耗。在仿真环节, 通过与负反馈控制策略相比较, 说明所提算法能够规划出三维能量最优路径, 而且可以有效降低AUV的能量消耗。     

磁流变液中磁性颗粒成链与团聚的临界特征分析

热运动对纳米级磁流变液系统的颗粒团聚行为和宏观流变特性扰动影响不可忽视.为研究施加外磁场后系统微结构与热运动间的关系，探讨在不同颗粒粒径情况下热运动能量在系统总能量中的占比.采用CCD设计方法，分析Monte Carlo仿真获取的颗粒位形信息，生成关于外磁场磁感应强度、颗粒粒径和体积分数的系统热耦合系数<λ>回归模型;成链团聚的临界颗粒粒径计算值比文献经验值高出约23%，证实在考虑系统内多因素的综合影响下，纳米级磁流变液具有更严格的流变现象临界发生条件.