MFI-type zeolite membrane on hollow fiber substrate for hydrogen separation

High performance MFI-type zeolite membranes on the outer surface of α-Al 2 O 3 hollow fibers were synthesized by secondary growth method using pure silica sol without an organic template. X-ray diffraction was used to characterize the phase structure of both the seed layer and zeolite membrane. The morphologies of the seed layer and zeolite membrane were examined by scanning electron microscopy. The zeolite membrane achieved an extraordinary H 2 /CO 2 separation factor of 10 with a high H 2 permeance of 5.56 10 -7 mol m -2 s -1 Pa -1 at 723 K.     

The occurrence and significance of C25HBI in Cenozoic saline lacustrine source rocks from the Western Qaidam Basin,NW China

The saline lacustrine deposit of the Oligocene Lower Ganchaigou Formation is the main source rock for the Western Qaidam Basin,NW China.In this study,abundant highly branched isoprenoids with 25 carbon atoms (C25HBI) were detected in the upper section of the Lower Ganchaigou Formation.C25HBI is a biomarker for diatoms,and can provide information regarding biogeochemical processes during production and preservation of sedimentary organic matter.The carbon isotopic values of C25HBI in these source rocks were in the range of-18‰ to-20‰.The relative enrichment in 13C of C25HBI suggests that these isoprenoids were derived from diatom blooms.In this case,the diatoms used HCO3-as an additional carbon source to dissolved CO2 in water column due to their high biological productivity.Conversely,the diatom blooms indicated an abundant nutrient supply to the environment and high primary productivity.Thus,the occurrence of 13C-enriched C25HBI could be an ideal marker for good source rocks.The decreased concentration of CO2(aq) in the water column induced by diatom blooms can result in an enrichment in 13C of organic matter synthesized by primary producers.This may be a possible reason for the occurrence of 13C-enriched organic matter in the Cenozoic source rocks of the Western Qaidam Basin.Previous studies have shown that the high carbon number n-alkanes sourced from diatoms have no carbon preference.Hence,the sources of n-alkanes in regional source rocks are complex,and should be considered when discussing the sources of organic matter in future studies.     

Angular dependent NEXAFS study of the molecular orientation of PTCDA multilayers on Au （111） surface

The molecular orientation of perylene-3,4,9,10-tetracarboxylic acid dianhydride (PTCDA) multilayers adsorbed on Au (111) surface has been investigated using angular dependent O K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The significant angular dependence of important resonant structures (π* and σ*) reveals that PTCDA molecules adopt an ordered geometry on the substrate surface. The average tilt angle of the PTCDA molecular planes is 27°±10° from the Au (111) surface.     

Evaluation of humic acid removal by a flat submerged membrane photoreactor

A flat submerged membrane combined with a TiO 2 /UV photocatalytic reactor (FSMPR) was employed in batch mode to remove humic acid (HA). HA removal efficiency was characterized by UV 254 absorbance, UV-vis spectra, dissolved organic carbon (DOC) concentration, specific UV absorbance (SUVA), and trihalomethane formation potential (THMFP). The FSMPR process was effective in removing more than 86% of DOC and nearly 100% of UV 254 absorbance, while the THMFPs of samples were reduced to < 19 μ g/L after 150 min of treatment. In addition, changes in transmembrane pressure (TMP) with and without UV were evaluated; TiO 2 /UV was effective at controlling membrane fouling by HA. Analysis of the molecular weight (MW) distributions and three-dimensional excitation-emission matrix (EEM) fluorescence spectra of HAs revealed that the effectiveness in membrane fouling control is a result of changes in HA molecular characteristics. The TiO 2 /UV photocatalytic reactor caused the degradation of high MW, hydrophobic humic-like molecules to low MW, hydrophilic protein-like molecules, although this fraction was not completely removed during 150 min of treatment and was less responsible for membrane fouling.     

Preparation of three-dimensionally ordered macroporous perovskite materials

In this paper,we use La0.8Sr0.2MnO3 and La0.7Ca0.2Sr0.1MnO3 as examples to demonstrate a preparation method for threedimensionally ordered macroporous(3DOM) perovskite thermochromic materials.Polystyrene spheres with an average diameter of 220 nm were self-assembled into a three-dimensionally ordered colloidal crystal template.A mixed metal nitrate solution prepared using La(NO3) 3·6H2O,Ca(NO3) 2·4H2O,Sr(NO3) 2,Mn(CH3COO) 2·4H2O and an ethanol precursor was used to fill the interstitial voids of the polystyrene colloidal crystal templates.3DOM La0.8Sr0.2MnO3 and La0.7Ca0.2Sr0.1MnO3 materials were then obtained after the sphere templates were removed via drying and calcination.The results show that the framework of the 3DOM materials can have different thicknesses and pore shrinkage rates by varying the filling times.In addition,the Curie temperatures of the 3DOM and bulk La0.8Sr0.2MnO3 materials can be varied by altering the preparation method.     

K2O对氧化物原料合成Al8B4C7的影响

采用硼砂、金属铝和碳粉为原料一步合成Al8B4C7.在合成过程中掺入不同含量的K2O,研究杂质K2O对合成Al8B4C7的影响.将原料混合均匀,在200MPa的压力下压制成φ20mm×20mm的圆柱型试样,将干燥后的试样在不同温度下的流动氩气气氛中进行合成.利用化学分析、XRD和SEM等分析测试技术,研究了K2O含量以及烧结温度对反应合成材料物相组成和显微结构的影响.结果表明:尽管加入不同含量的K2O,但其高温烧结反应后,若K2O的质量分数在0.019%～0.028%之间,就不出现含K的新相.K2O的加入不利于Al8B4C7的合成,它可将Al8B4C7的开始生成温度提升至1 400℃,而且1 700℃时,Al8B4C7含量较不加入K2O时明显减少.添加K2O合成的Al8B4C7为1μm左右大小的无规则小颗粒.     

3GPP-LTE系统下行链路S-SCH检测算法的低复杂度实现

小区搜索是3GPP-LTE移动通信系统中的重要过程,研究了此过程中下行链路辅同步信道（S-SCH）的检测问题,指出了接收机在采用最大似然序列检测（MLSD）算法进行S-SCH检测时,具有较高的计算复杂度.给出了一种基于MLSD准则S-SCH检测算法的低复杂度实现方法,利用S-SCH序列的结构特点,缩小候选S-SCH序列...     

LiMn2O4单晶的充放电性能

为进行尖晶石LiMn2O4的改性优化,合成了大小为100~400 nm,呈八面体形貌的LiMn2O4尖晶石单晶,并采用XRD、SEMI、CP等方法进行了分析,旨在对该尖晶石单晶的充、放电性能进行表征.     

制备特定尺寸的纳米金颗粒方法及性能表征

通过化学还原法制备出不同粒径的纳米金颗粒。利用紫外可见分光光度计和透射电子显微镜对纳米金颗粒的形貌及尺寸进行表征。讨论了还原剂种类、还原剂用量、试剂加入顺序、反应温度等因素对纳米金颗粒稳定性、粒径、形貌和分散性的影响。结果表明：Na3C6H5O7为还原剂制得纳米金颗粒粒径在15-20 nm之间,NaBH4为还原剂制得的...     

均匀沉淀（尿素水解）法合成CO32-型MgAl-LDH

采用均匀沉淀法(尿素水解法)合成了高结晶度的CO32-型MgAl-LDH,探索了温度和时间对产物的影响.研究发现,n(Mg)/n(Al)进料比为2时,较低反应温度(如100℃)下很难得到n(Mg)/n(Al)=2的LDH.这可能与Mg(OH)2溶解度较高,Mg2+难以与Al3+一同沉淀有关.为提高产物n(Mg)/n(Al),我们采用提高n(Mg)/n(Al)投料比(如3∶1,4∶1,5∶1)的方法.研究发现,反应时间较短时,可得较纯的LDH相,但产物的n(Mg)/n(Al)远低于进料比;若反应时间延长,会出现水菱镁矿(hydromagnesite)和菱镁矿(magnesite,MgCO3)的杂相.由此推断,为得到高n(Mg)/n(Al)的LDH,不能单纯增加n(Mg)/n(Al)进料比,其他条件如尿素浓度,尤其是反应温度等也需改变.