Blue emission from hydrogen-containing a-Si：H／SiO2 multilayers and the investigation of its mechanism

A series of hydrogen-containing a-Si:H/SiO2 multilayers with different a-Si:H sublayer thickness were fabricated by layer-by-layer deposition and in situ plasma oxidation in a plasma-enhanced chemical vapor deposition system (PECVD). Optical induced blue emission from the samples was observed by the naked eye at room temperature, which has never been reported in the luminescence study of Si/SiO2 multilayers up to now. Both the photoluminescence (PL) peak and the absorption edge show a blue shift as the a-Si:H sublayer thickness decreases. The origin of the blue emission and the effect of hydrogen are discussed.     

偏滤器部件W/Cu功能梯度材料的热应力缓和

W/Cu功能梯度材料是一种有希望用作聚变反应堆面向等离子体部件的侯选材料。为避免材料在使用过程中的热应力破坏,根据偏滤器部件服役的热流工况,在结合导热能力分析的情况下运用有限元软件对W/Cu梯度材料进行了优化设计。结果表明,成分分布指数的增大以及金属W厚度的增加均使表面工作温度提高;当成分分布指数为1.0～1.2时W/Cu梯度材料有最佳的热应力缓和效果。在30MW/m2的表面热流负荷下,与非梯度材料相比,经过优化设计的W/Cu功能梯度材料的等效热应力降低了62.3%,表面工作温度下降了50℃;而与单纯金属W相比,W/Cu梯度材料的表面工作温度较之降低445℃。     

换热器管束流体激振的研究现状评估及新方法

换热器管束的流体激振问题是严重影响其运行安全性的一个关键问题。该文对近年来国内外对此问题的研究进行了综述与评估。根据以往在叶轮机械流体激振研究方面开创的理论系统和研究方法,作者提出了通过应用振荡流体力学原理和参数多项式方法去求解流体基本方程,从而确定流体激振力的方法,应用全功能分析方法来准确预估流体弹性振动的稳定性边界,应用振荡压力传播理论来分析包括声共振在内的流体激振现象。这些思想为换热器管束流体激振研究指引了一条新途径。     

王不留行中总黄酮的提取工艺研究

采用正交实验,考察乙醇浓度(A)、料液比(B)、温度(C)、微波功率(D)4个因素对王不留行中总黄酮提取率的影响.实验得出最佳提取工艺为A1B3C2D3,即溶剂为60%(ψ)乙醇,料液比为1:60,提取温度55℃,微波功率800 W.首次运用微波技术从王不留行中提取总黄酮,具有提取率高,提取速率快,提取温度低,能量消耗小等特点.     

Research progress in the study of atmospheric pressure glow barrier discharge

Atmospheric pressure glow barrier discharge (APGBD) can operate at high pressure, and so vacuum device is not necessary. Furthermore, the produced plasma by APGBD has moderate electron temperature and density besides good uniformity. Therefore, APGBD has extensive potential applications in industry and has been becoming a hot issue in the research of low temperature plasma. In this paper, the main problems in the study of atmospheric pressure glow discharge generated by dielectric barrier discharge, including the experimental setup, judging criterion, discharging conditions, physical mechanisms, and parameter diagnoses, are discussed, and further research prospects of APGBD are proposed.     

机器人等离子喷涂轨迹间距优化及实验研究

在等离子喷涂快速制造金属模具工艺中,采用机器人等离子喷涂成形工艺,在被喷涂原型表面生成具有较高硬度的耐磨金属涂层.机器人喷涂路径规划是影响金属涂层成形性的关键因素,而轨迹间距是机器人喷涂路径中的重要参数.通过对机器人等离子喷涂几何模型的实验研究,从而确定了最佳的轨迹间距,为合理的机器人喷涂路径规划提供了依据.     

等离子体对壳聚糖整理棉织物效果的影响

研究等离子体预处理技术对棉织物壳聚糖功能整理效果的影响.比较3种不同的整理方法.第1种是用柠檬酸及壳聚糖的混合溶液进行一浴整理;第2种是先用柠檬酸溶液再用壳聚糖溶液进行两浴处理;第3种是使用等离子体预处理织物后再经两浴法整理.使用酸性橙Ⅱ对整理后织物染色并测试K/S值.通过测试织物大肠杆菌和金黄色葡萄球菌的抗菌率考察其抗菌性.结果表明,经等离子体预处理后再经两浴法整理的织物的K/S值以及抗菌率较一浴法或两浴法都有所提高,对大肠杆菌和金黄色葡萄球菌的抗菌率高达100%.     

中频交流脉冲电源的研制

研制了150kHz中频交流脉冲电源,给出了中频交流脉冲电源的设计思路和实现方案.该电源采用全桥逆变拓朴电路、PWM控制方式、输出功率叠加的方案,具有输出变压器原边平均电流和副边峰值电流的过流保护功能.其输出峰值电压0~1200V连续可调,频率1~150kH z可调,脉宽占空比10%~40%可调,输出平均电流0~5A,最大输出功率5kW.利用该电源进行了等离子体化学气相沉积和反应溅射实验,证明该电源各项指标运行正常,工作稳定,具有良好的应用价值.     

Plasma sheet stretching accompanied by field aligned energetic ion fluxes observed by the NUADU instrument aboard TC-2

The NUADU (NeUtral Atom Detector Unit) instrument aboard TC-2 recorded 4л solid angle images of charged particles (E >180 keV) spiraling around the magnetic field lines in the near-Earth plasma sheet (at ~ -7 RE, equatorial dawn-to-night side) during a geomagnetic storm (Dst =-219 nT) on August 24, 2005. Energetic ion beam events characterized by symmetrical, ring-like, solid angle distributions around ambient magnetic field lines were observed during a 34-minute traversal of the plasma sheet by the TC-2 spacecraft. Also, observations during these multiple crossings of the plasma sheet were monitored by the magnetometer experiment (FGM) aboard the same spacecraft. During each crossing, a whistler-mode chorus enhancement was observed in the anisotropic area by the TC-2 low frequency electromagnetic wave detector (LFEW/TC-2) at a frequency just above that of the local lower hybrid wave. A comparison of the ion pitch angle distribution (PAD) map with the ambient magnetic field shows that an enhancement in the field aligned energetic ion flux was accompanied by tailward stretching of the magnetic field lines in the plasma sheet. In contrast, the perpendicular ion-flux enhancement was accompanied by a signature indicating the corresponding shrinkage of the magnetic field lines in the plasma sheet. Since both parallel ion-flux and perpendicular ion-flux enhancements occurred intermittently, the data were interpreted to imply a dynamical, oscillatory process of the magnetic field line (stretching and shrinking) in the near-Earth plasma sheet, which might have acted to help establish an interaction region in this area which would support continuous aurora-substorm triggering during the ongoing magnetic storm. The whistler-mode chorus may have been produced due to ion gyro-resonance during particle pitch angle diffusion after the plasma sheet compression.     

沥青路面再生机微波加热机理及数值模拟

针对开口微波场中沥青混凝土路面微波加热机理的探讨，从麦克斯韦波动方程、热力学微分方程出发，建立了开口微波场中微波透射沥青混凝土路面材料时的三维有源非稳态加热模型．利用热力学第一边界条件，选用时域差分法求解耦合的麦克斯韦波动方程及热力学偏微分方程组，得到了各种加热条件下沥青混凝土路面材料中的温度场．实验发现，数值计算的结果与实验结果相当吻合，验证了沥青混凝土路面三维有源非稳态微波加热模型的正确性，为开发可用于沥青混凝土路面再生等大尺寸复合电介质微波加热设备提供了理论基础、设计方法和实验依据．