神经毒素MPP+诱发PC12细胞凋亡的实验研究

采用细胞体外培养、噻唑蓝(MTT)比色法、荧光染色技术、透射电镜、流式细胞技术结合的方法,研究了神经毒素MPP 对PC12细胞增殖和凋亡的影响,为进一步研究药物的神经保护作用提供实验模型.结果表明,MPP 对PC12细胞的诱导凋亡作用呈时间和剂量相关性.0.20mM的MPP 作用于PC12细胞48h后,细胞的存活率降低为60%,细胞核发生凝集和断裂,超微结构发生了一系列的变化,呈现出明显的凋亡特征.流式细胞技术的Annexin v-FTTC和PI双染法显示,活细胞占20.2%,晚期凋亡/坏死细胞占51%,早期凋亡细胞占6.75%.提示,MPP 能够诱导PC12细胞凋亡,是研究神经保护作用药物很好的体外实验模型.     

一种求解二维扩散方程的分块隐式方法

提出了一种求解二维扩散方程的分块隐式格式。它结合了古典显格式、古典隐式格式和Crank-nicolson格式，该格式具有明显的并行性、很高的精度、很好的稳定性。     

粉末冶金Al-10%Ti复合材料的力学和耐磨性能

文章采用“冷压烧结+热挤压”的粉末冶金法制备出Al—10％Ti复合材料,研究了Al—10％Ti复合材料的孔隙率、抗拉强度、伸长率、硬度和耐磨行为。结果表明:与Al相比,Al-10％Ti复合材料的孔隙率较高,抗拉强度和伸长率较低,硬度和耐磨性较高;Al-10％Ti复合材料的磨损体积损失分别是Al的1/22.3及Qsn6.5-0.4的1/14.8,其磨损表面呈Al基体+Ti颗粒+孔隙的耐磨组织。     

原位颗粒含量对半固态7075铝合金组织的影响

制备具有不同原位TiC颗粒含量的喷射沉积7075铝合金,在610℃和620℃进行二次加热并保温30min,淬火固定半固态组织.采用扫描电镜观察其组织,利用平均截线法统计其晶粒尺寸,分析不同颗粒含量对喷射沉积7075铝合金半固态组织的影响规律.结果表明:当TiC颗粒含量达到2.91%(体积分数)时已经产生良好的钉扎效果,使得合金基本保持喷射沉积组织特征,能够满足后续的半固态成形工艺要求;TiC颗粒含量超过2.91%后,晶粒尺寸会进一步减小,但晶界上的颗粒明显增多并呈网状分布;TiC颗粒含量小于2.91%时,局部区域发生晶粒的异常长大现象,使合金组织的均匀化程度下降.     

Pr-Fe-V-Ti合金系ThMn12型化合物及氮化物的合成与磁性

本文报导成功地合成了Ti或V,Ti同时稳定的镨系1:12相化合物.Pr(Fe,V)12化合物不存在,PrFe11 Ti化合物仅在1110℃-1030℃狭窄的温度范围内形成,以部分V替代Ti,可使1:12相形成温度范围明显增大,形成温度降低.氮化之后,ThMn12结构不变,但体积膨胀约4.5%.PrFe11 V1-xTixNδ((0.2≤x≤1)合金样品的饱和磁化强度为144～150 emu/g,居里温度为457℃～477℃,各向异性场大于7 T.     

Atomic-scale computer simulation for early precipitation process of Ni75Al10V15 alloy

The kinetic model for a ternary system is introduced based on the microscopic diffusion form of the phase-field equations for a binary alloy. The equation is solved in the reciprocal space. This model is used to investigate the early precipitation process of Ni75-Al10V15 by simulating the atomic pictures of the two ordered phases and calculating the order parameters of γ′(Ni3Al) phase. Simulation results show that the γ′ ordered phases precipitate from the disordered matrix by a non-classical nucleation mechanism, and the nonstoichiometric γ′ ordered phase appears first and then transforms into the stoichiometric one. Clusters of V atoms appear at the γ′ phase boundaries followed by the formation of the nonstoichiometric θ ordered phase. The farther the location from γ′ phase boundary is, the lower the order degree of θ phase is. There exist two kinds of DO22 ordered domains: a horizontal one and a vertical one, related to their adjacent γ′ phase boundaries. The model could describe the atomic ordering and composition clustering simultaneously, and any a priori assumption about the new phase structure and precipitation mechanism etc. is unnecessary.     

Computer simulation for the precipitation process of Ni75Al7.5V17.5 alloy

The precipitation mechanism of Ni75Al7.5V17.5 alloy above the L12 instability line, between the L12 and D022 instability lines and below the D022 instability line are studied using microscopic phase-field kinetic equation. This paper is aimed at investigating the effect of temperature on precipitation mechanism and morphological evolution of the alloy. Our simulations demonstrate that the precipitation is a mixed mechanism of non-classical nucleation growth and spinodal decomposition above the L12 instability line. It needs certain thermal fluctuations for nucleation and the number of θ phases is small at this temperature. The precipitation mechanism of γ'phase is congruent ordering followed by spinodal decomposition, and θ phase is a mixed mechanism of non-classical nucleation growth and spinodal decomposition between the L12 and D022 instability lines. The mechanism below the D022 instability line is similar to that between the L12 and D022 instability lines. With the decrease of the temperature, ordering and phase separation becomes fast, the dimension of γ'phase becomes small, the shape transforms from equiaxed to block, the dimension of θ phase becomes large and the shape transforms from strip to circle.     

Effects of Ca on the distribution, structure and morphology of aluminum species in polyaluminum chloride

The flocculation efficiency of polyaluminum chloride (PAC) is closely related to the distribution and structure of its AI species, and Al13 is the optimal species in PAC for flocculation. A series of PAC containing Ca was prepared by adding Ca before and after the basifying reaction. The effects of Ca on the Al species were studied by ^27Al nuclear magnetic resonance (NMR) and atomic force microscope (AFM) techniques. The experimental results show that the introduction of Ca increases the content of Alm and Al13 in PAC and decreases their chemical shifts in NMR spectra due to the electric repulsion between the positive Ca species and AI species and the formation of AI-O-Ca complexes.With the rise of Ca/AI molar ratio, the AI species in PAC tend to scatter. It is observed that the formerly branch-aggregated clusters are tending to form granule-aggregated ones whose diameter gets smaller and smaller, and the floccule aggregates are formed at a higher Ca/Al molar ratio. The introduction of Ca to PAC, which increases the Al13 content, is certainly to enhance the flocculation efficiency of PAC in water treatment.     

多层喷射沉积制备耐热铝合金管坯热流分析(Ⅱ) --沉积过程热流分析

通过建立沉积阶段热流分析模型，对多层喷射沉积制备耐热铝合金管坯过程中喷射流沉积后的凝固和冷却进行了分析．喷射流沉积后与基体／沉积坯的传导热交换占热输出率的90％以上，在沉积过程中，沉积面的温度变化呈周期性的升降．计算结果表明，多层喷射沉积采用移动坩埚式扫描方式，延长了喷射流沉积时间间隔，喷射流沉积后可以获得10^3K／s以上的冷却速度。     

纳米Al2O3/PVAc复合材料的制备与表征

用硝酸铝和碳酸铵为原料,以聚乙二醇为分散剂,采用溶胶-凝胶法制备了纳米Al2O3溶胶.用液-液混合分散法将制得的纳米Al2O3溶胶分散于聚醋酸乙烯酯(PVAc)的丙酮溶液中,得到无色透明的纳米Al2O3/PVAc复合溶胶,将溶胶刮涂制膜,得无色透明的Al2O3/PVAc复合膜.用透射电子显微镜和拉曼光谱对复合材料进行了表征.激光粒度分析仪分析表明,Al2O3在PVAc粒径在30～35 nm范围内,平均密度31.2 nm、体积平均27.5 nm、数均25.3 nm .Zeta电位值为-42.5 mV.并对Al2O3/PVAc复合溶胶进行紫外吸收测试,结果显示,与纯PVAc溶液相比,最大吸收峰蓝移10.4 nm,且吸光度增加2.3倍.